Motorola HK250 User manual

MOTOROLA HK250
EN

1EN Check it out
Check it out
here’s what you can do
Your MOTOROLA HK250 Bluetooth® headset gives you
crystal clear conversations with CrystalTalk™, and takes
handsfree to the next level with voice prompts and
ability to connect to two phones at once.
Go ahead, check it out:
At a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connect & go. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Basics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connect with Motorola . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Safety, Regulatory & Legal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Caution: Please read the important safety, regulatory
and legal information at the back of this guide.

2At a glance EN
At a glance
the important bits, quick and easy
Note: Your battery is designed to last the life of your
product. It should only be removed by a recycling facility.
Any attempt to remove or replace your battery will
damage your headset.
Note: Fully charge before use.
Charge
Call
Button
Power
Switch
Off
On
(MicroUSB)
Earhook
Volume
Status
Light
Earpiece
Phone
Tablet
Computer
Connections
Wear
Calls
Music
Press in
to adjust
Ear
Cushion

3EN Connect & go
Connect & go
let’s get you connected
Tip: For daily use, just make sure your headset is on,
and your phone’s Bluetooth feature is on. Your headset
and phone connect automatically.
Turn Bluetooth on.
T
1
On
2
Status Light - Blue
Turn headset on (charge before use).
Voice prompt: “Welcome to
HK250. Battery level is
<level>. Ready to pair.”
On
Follow voice prompts.
Complete.
C
4
Voice prompt:
“pairing complete”
3
Enter “0000”
if prompted.
Enter passcode.

4Basics EN
Basics
standard features, advanced quality
Calls
Note: Some features are phone/network dependent.
Note: Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always obey
the laws and drive safely.
To...
make a voice
dial call
Press the Call button and you
hear a tone.
redial last call Press and hold the Call button
until you hear a tone.
mute or
unmute
Press and hold the Volume button
until you hear “mute on” or “mute
off”.
end a call Press the Call button .

5EN Advanced
Advanced
more clever stuff
Second device
Using two phones? Or maybe a tablet and a phone? Pair
with two devices.
•Before pairing the second device, turn off the
Bluetooth feature of the previously paired device.
Now pair your second device as normal, see “Connect
& go” on page 3.
•Once paired, to connect to both devices simply turn
them on. You’ll hear “<phone x> connected” as each
device connects with your headset.
•To use headset features, such as voice dial, redial, and
end call, with the second device, just use the feature
as normal and follow the voice prompts.
Call waiting
Note: Some features are phone/network dependent.
To...
answer a
second call
Press the Call button .
reject a call Press and hold Volume button until
you hear a tone.

6Advanced EN
Note: Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always obey
the laws and drive safely.
Caller ID
If your phone knows your caller’s number, then you hear
“call from <number>” on an incoming call.
Status light
An easy way to check your headset.
status light headset
three blue flashes turning on/off
steady blue pairing or connected
rapid blue/purple
flashes
connecting to your device
quick blue flash receiving or making a call on
phone 1
quick purple flash receiving or making a call on
phone 2
slow blue pulse on a call
slow blue flash in standby (not on a call)
slow red flash idle (not connected to a device)
slow red pulse on mute
steady red trying to connect to your device

7EN Advanced
Note: After 1 minute on a call, or 20 minutes of
inactivity, the light stops flashing to save battery power,
but the headset stays on.
Settings
Press and hold the Call button and turn the headset
on. Follow the voice prompts to change these settings:
•Reset to factory default
Note: This removes all pairing information stored in
your headset.
•Voice interface
•Caller ID
•Multipoint (two phone) connections
•WBS (wide-band audio for better sound)
quick red flash in a low battery state
status light headset

8EN
Connect with Motorola
Get what you need:
•Answers:User guides, online help and more at
www.motorola.com/support.
• Support: You can contact the Motorola Customer
Support Center at: 1-800-331-6456 (United States),
1-888-390-6456 (TTY/TDD United States for hearing
impaired), or 1-800-461-4575 (Canada).
• Bluetooth: If you have questions or need assistance,
contact us at 1-877-MOTOBLU, or visit
www.motorola.com/bluetoothsupport or
www.motorola.com/bluetoothconnect.
• Accessories: Find more accessories at
www.motorola.com/products.
•Social:The latest news, tips & tricks, videos and so
much more—join us on:
YouTube ™ www.youtube.com/motorola
Facebook ™ www.facebook.com/motorola
Twitter www.twitter.com/motomobile