Motorola HS801 User manual

motorola.com
HS801

Headset Features
1 Volume Control
Buttons—
Adjusts
speaker volume
up (+) or down (-).
2 Charging Port—
Accepts the plug for
your handset battery charger.
3 Earhook— Attaches headset to ear.
4 Multifunction Button (MFB)—
Controls multiple headset functions.
5 Headset Indicator LED— Provides
a visual cue about headset status.
6 Microphone — Picks up your voice input.
7 Speaker— Plays the
sound you receive on
the call.
4532
1
7
6

1
Quick Start
To use your headset, you need to:
1 Charge the headset (see page 10).
2 Turn on Bluetooth in your phone
(refer to your phone’s users manual).
3 Turn on your headset (hold both the
MFB and either volume button until
the LED turns on). When the
headset is On the LED will flash
every 3 seconds.
4 Pair your headset with your phone
(see page 14).

2
Export Law Assurances
This product is controlled under the export
regulations of the United States of America and
Canada. The Governments of the United States
of America and Canada may restrict the
exportation or re-exportation of this product to
certain destinations. For further information
contact the U.S. Department of Commerce or
the Canadian Department of Foreign Affairs and
International Trade.
The use of wireless devices and their
accessories may be prohibited or restricted in
certain areas. Always obey the laws and
regulations on the use of these products.
MOTOROLA and the Stylized M Logo are
registered in the US Patent & Trademark Office.
The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under
license.
All other product or service names are the
property of their respective owners.
© Motorola, Inc., 2004.
6809490A88-B

3
Contents
Introduction. . . . . . . . . . . . . . . . . . . . 8
What Is Bluetooth
®
Wireless
Technology? . . . . . . . . . . . . . . . . . . 8
How Can I Use
My Wireless Headset? . . . . . . . . . . 9
Using Your Headset . . . . . . . . . . . . 10
Charging Your Headset Battery . . . 10
Placing the Headset on Your Ear . . 13
Pairing Your Headset and Phone . . 14
Pairing to Additional Devices. . . . . 16
Making and Receiving Calls . . . . . 17
LED Indicator Light . . . . . . . . . . . . 21
Audio Tones. . . . . . . . . . . . . . . . . . 22

4
Safety and General
Information
IMPORTANT INFORMATION ON SAFE AND
EFFICIENT OPERATION. READ THIS
INFORMATION BEFORE USING YOUR
DEVICE.
Users are not permitted to make changes or
modify the device in any way. Changes or
modifications not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment. See 47 CFR
Sec. 15.21.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation. See 47 CFR
Sec. 15.19(3).

5
Electromagnetic
Interference/Compatibility
Note: Nearly every electronic device is
susceptible to electromagnetic interference (EMI)
if inadequately shielded, designed, or otherwise
configured for electromagnetic compatibility.
Facilities
To avoid electromagnetic interference and/or
compatibility conflicts, turn off your device in any
facility where posted notices instruct you to do
so. Hospitals or health care facilities may be
using equipment that is sensitive to external
RF energy.
Aircraft
When instructed to do so, turn off your device
when on board an aircraft. Any use of a device
must be in accordance with applicable
regulations per airline crew instructions.

6
Medical Devices
Hearing Aids
Some devices may interfere with some hearing
aids. In the event of such interference, you may
want to consult with your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device,
consult the manufacturer of your device to
determine if it is adequately shielded from RF
energy. Your physician may be able to assist you
in obtaining this information.
FCC Notice to Users
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause

7
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and the receiver.
• Connect the equipment to an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.

8
Introduction
Introduction
What Is Bluetooth®
Wireless Technology?
Bluetooth devices communicate
without wires, using built-in radio
transceivers that operate on a globally
available radio frequency to ensure
worldwide compatibility. Your Bluetooth
Wireless Headset can communicate
with other Bluetooth devices within a
range of approximately 10 meters
(33 feet).

Introduction
9
How Can I Use
My Wireless Headset?
Your Wireless Headset, with Bluetooth
®
technology, lets you connect with other
similarly equipped devices such as a
Motorola V600 with integrated
Bluetooth technology.
• Use your phone hands free.
• Handle incoming and outgoing
calls with the headset
multifunction control button (MFB).
• Use voice activation to make calls.
Note: The HS801 supports both Headset
and Hands Free Bluetooth Profiles for
increased functionality and compatibility
with more products. Consult your user’s
guide for more information.

10
Using Your Headset
Using Your
Headset
Charging Your
Headset Battery
First-Time Use —Before you can use
your headset, charge its self-contained
battery for two hours.
Recharging —When you hear five
rapid high tones through the headset
speaker, repeated at 20-second
intervals, the headset battery needs
recharging.
The rechargeable batteries that
power your wireless headset
must be disposed of properly and

Using Your Headset
11
may need to be recycled. Contact your
local recycling center for proper disposal
methods.
Warning: Never dispose of batteries in
a fire because they may explode.
1 Plug the
Motorola
charger
into the
headset,
with the
charger’s
release tab facing down and the
headset facing up.
2 Plug the other end of the charger
into an electrical outlet.
During charging, the headset
indicator turns on and remains on
until charging completes. The
Release tab
down

12
Using Your Headset
headset will not work while
charging. Your headset fully charges
in approximately two hours.
3 When charging completes (indicator
off), remove the charger from the
electrical outlet, press the release
tab, and detach the charger from the
headset.
4 To power your headset on or off,
hold both the MFB and either volume
button until the
LED turns on.
When the headset is On the LED
will flash every 3 seconds.
Note: You can also use a Motorola
Original Vehicle Power Adapter to
charge the headset battery while in your
vehicle.

Using Your Headset
13
Placing the Headset
on Your Ear
1 Open the earhook.
2 Loop the earhook
over your ear.
3 Press the headset
to your ear.
4 Point the
microphone toward
your mouth.
Tip: When
packaged, the
headset is originally
set up to wear on
the right ear. If you
flip the earhook all the way over, you
can wear the headset on your left ear.

14
Using Your Headset
Pairing Your Headset
and Phone
Note: You must pair your headset and
phone before you can make a call.
“Pairing” creates a link between
devices with Bluetooth
®
wireless
technology, and allows the phone to
remember the headset’s unique ID.
When your headset and phone are
paired, your headset automatically
connects to your phone.
With the headset and phone close
together:
1 With the headset on, hold the
volume up or down button until the
LED lights steadily.
2 Perform a device discovery from
the phone.

Using Your Headset
15
For details on device discovery
for your phone, refer to the
phone’s user’s guide.
When the scan is complete, the
phone displays the devices found.
3 Select the Motorola HS801 from the
discovered devices list and confirm
following the on screen prompts.
4 When prompted by the phone, enter
the passkey
0000 and confirm to pair
the headset with the phone.
The device ID is now stored in the
phone’s memory.
Pairing is successful when the headset
indicator flashes rapidly.

16
Using Your Headset
Pairing to Additional
Devices
Your headset can store pairing
information for up to eight different
devices with Bluetooth
®
wireless
technology. Devices are stored in a
“Paired Device List” in memory in the
order entered. When an attempt to pair
to more than eight devices is made, the
oldest paired device is removed from
the list.
Any of the eight paired devices can
initiate a connection to the headset.
The headset will only automatically
initiate a connection (upon power-up)
with the
last device it was connected
to
. If you want to connect the headset
to another device in the paired device
list, you must initiate the connection

Using Your Headset
17
from that device. Whichever of the
eight devices initiates a connection to
the headset afterwards, that device
then becomes the “last connected”
device.
Making and Receiving
Calls
Your headset supports both Handsfree
and Headset Profiles. Accessing call
functions depends on which profile your
phone supports.
Note: Some phones do not support all
features listed. See your phone’s user’s
guide.

18
Using Your Headset
You can activate call functions for the
Handsfree profile according to the
following table:
Enter
Pairing
Mode
Phone: On
Headset: On
Hold the volume up or down button
until LED remains lit. Headset can
be discovered by another
Bluetooth
®
device.
Make a
Voice
Dial Call
Phone: On in idle
Headset: On
Short press MFB, speak name,
phone dials call
Redial a
Number Phone:
On–voice dialing turned
on or off
Headset: On–(Idle)
Long press MFB