Moxa Technologies CP-102N-T User manual

P/N: 1802001000011
*1802001000011*
Mini PCI Express Multiport
Serial Board Series
Quick Installation Guide
Version 1.1, January 2023
Technical Support Contact Information
www.moxa.com/support

2023 Moxa Inc. All rights reserved.

- 2 -
Overview
Moxa’s new Mini PCI Express Multiport Serial Boards Series fulfills a
customized expansion need and provides a faster response to market.
We have designed the Mini PCI Express multiport serial boards for use
by industrial automation system manufacturers, system integrators,
and industrial PC makers.
Moxa’s Mini PCIe Express Multiport Serial Boards CP-100N Series
includes the following models.
Model Name
Description
CP-102N-T
2-port RS-232 Mini PCI Express serial board
CP-102N-I-T
2-port RS-232 Mini PCI Express serial board with 2.5 kV
capacitive isolation
CP-132N-T
2-port RS-422/485 Mini PCI Express serial board
CP-132N-I-T 2-port RS-422/485 Mini PCI Express serial board with
2.5 kV capacitive isolation
CP-104N-T
4-port RS-232 Mini PCI Express serial board
CP-104N-I-T 4-port RS-
232 Mini PCI Express serial board with 2.5 kV
capacitive isolation
CP-134N-I-T
4-port RS-422/485 Mini PCI Express serial board with
2.5 kV capacitive isolation
CP-114N-T
4-port RS-232/422/485 Mini PCI Express serial board
Package Checklist
Before installing the Mini PCI Express board, verify the package
contains the following items:
•Moxa Mini PCI Express multi-serial board (CP-104N-I-T, CP-134N-I-
T, CP-114N-T models have the main board and I/O boards)
•Moxa DB9 brackets
•Internal connection cable 25 cm
•Quick installation guide (printed)
•Warranty card
NOTE
The cable type, cable volume, and DB9 bracket volume might
differ
for different product models.
Notify your sales representative if any of the above items are
missing or damaged
Optional Accessories
Model
Description
Suitable models
CBL-M9HSF1x10H-15-01
10-pin female to 1 DB9
male serial cable, 15 cm
CP-102N-I-T
CP-132N-I-T
CBL-M9HSF1x10H-15-02 10-pin female to 1 DB9
male serial cable, 15 cm
CP-102N-T
CP-132N-T
CBL-M9x2HSF2x10H-15 20-pin female to 2 DB9
male serial cable, 15 cm
CP-104N-T
CBL-HSF2x10-15
20-pin female to 20-pin
female serial cable, 15
cm
CP-104N-I-T
CP-134N-I-T
CP-114N-T

- 3 -
Mechanical Drawing
CP-102N-T/CP-132N-T
CP-102N-I-T/CP-132N-I-T

- 4 -
CP-104N-T
CP-104N-I-T/CP-134N-I-T
Mainboard Dimensions (Mini PCIe)
(Mainboard size is the same with CP-104N-T)

- 5 -
I/O Board Dimensions
CP-114N-T
Mainboard Dimensions (Mini PCIe)
I/O Board Dimensions

- 6 -
Bracket Size
Hardware Installation Procedure
The Mini PCI Express board must be plugged into the PC before
installing the driver. The following steps show how to install the Moxa
Mini PCI express cards.
1. Find the Mini PCIe slot in your computer.
2. Insert the Mini PCIe multiport serial board and lock the screws.
3. Unscrew to remove the blank expansion plate. (We use Moxa
V2406C as an example.)
NOTE
Moxa Mini PCIe multiport serial boards are suitable for Moxa's
IPC models that have mini PCIe interface
s and expansion slots,
such as
the MC-7400 Series, V2403C Series, and V2406C
S
eries. The bracket size matches
the expansion slot dimensions
of the IPC models.
For the models (CP-102N-T, CP-102N-I-T, CP-132N-T, CP-132N-
I-T, CP-104N-T) without I/O boards.
4. Unscrew the hexagonal copper pillars on the cable (DB9
Connector) and use them to connect the provided cables with the
bracket.

- 7 -
5. Insert the plate through the blank expansion slot and lock the
screws.
6. Connect the Mini PCIe multiport serial board with the cables.
For the models (CP-104N-I-T, CP-134N-I-T, CP-114N-T) with
I/O boards.
4. Unscrew the hexagonal copper pillars on the I/O board and lock
the I/O board with the bracket.
5. Insert the I/O board with the bracket through the blank plate hole
and lock the screws.
6. Connect the I/O board to the Mini PCIe multiport serial board with
the serial cables.
NOTE
To pull out the internal
connection cable safely
from the boards, you
should perpendicularly
pull it out as
shown in
the image
on the right.
Also, pull out the cable
gently.

- 8 -
Software Installation Information
1. Get the driver at www.moxa.com. Based on the OS type, choose
the corresponding driver.
2. Installing the driver:
•For Windows OS (Take the installation of Win7 as an example)
Unzip and execute the .exe file
Follow the instructions to install the drivers
•For Linux
Execute the following commands from the Linux prompt:
Get the driver at www.moxa.com and unzip the file:
#cd /
#mkdir moxa
#cd moxa
#cp /<driver
directory>/driv_linux_smart_<version>_build_<build_dat
e>.tgz.
#tar -zxvf
driv_linux_smart_<version>_build_<build_date>.tgz
Install the driver:
#cd mxser
#./mxinstall
DIP Switch Setting
On
OFF (Default)
SW1
Enable 120-ohm termination
resistor
Disable termination resistor
SW2
1K-ohm pull-high/low
resistors
150K-ohm Pull-high/low resistors
SW3
Reserved for future feature
SW4
Reserved for future feature
Pin Assignments
Male DB9
Pin RS-232 RS-422/
RS-485-4W
RS-485-2W
1
DCD
TxD- (A)
–
2
RxD
TxD- (B)
–
3
TxD
RxD+ (B)
Data+ (B)
4
DTR
RxD- (A)
Data- (A)
5
GND
GND
GND
6
DSR
–
–
7
RTS
–
–
8
CTS
–
–