MSI Optix Series User manual

Optix Series
LCD Monitor
Optix G274 (3CC2)
Optix G274R (3CC2)
Optix G274RW (3CC2)
User Guide

2Contents
Contents
Getting Started.............................................................................................................. 3
Package Contents................................................................................................... 3
Installing the Monitor Stand................................................................................... 4
Adjusting the Monitor ............................................................................................. 6
Monitor Overview.................................................................................................... 8
Connecting the Monitor to PC .............................................................................. 11
OSD Setup ................................................................................................................... 13
Navi Key ................................................................................................................ 13
Hot Key.................................................................................................................. 14
OSD Menus.................................................................................................................. 15
Gaming.................................................................................................................. 15
Professional.......................................................................................................... 17
Image .................................................................................................................... 18
Input Source ......................................................................................................... 19
Navi Key ................................................................................................................ 19
Setting................................................................................................................... 20
Specifications.............................................................................................................. 22
Preset Display Modes ................................................................................................ 24
Troubleshooting.......................................................................................................... 25
Safety Instructions...................................................................................................... 26
TÜV Rheinland Certification....................................................................................... 28
Regulatory Notices..................................................................................................... 29
Revision
V1.0, 2022/01

3
Getting Started
Getting Started
This chapter provides you with the information on hardware setup procedures. While
connecting devices, be careful in holding the devices and use a grounded wrist strap
to avoid static electricity.
Package Contents
Monitor
Optix G274
Optix G274R
Optix G274RW
Documentation Quick Start Guide
Registration Card
Accessories
Stand with Screw(s)
Stand Base with Screw(s)
Stand Cover with Screw(s)
Power Cord
Power Adapter
Cables DisplayPort Cable (Optional)
⚠
Important
∙ Contact your place of purchase or local distributor if any of the items is damaged or
missing.
∙ Package contents may vary by country.
∙ The included power cord is exclusively for this monitor and should not be used with
other products.

4Getting Started
Installing the Monitor Stand
1. Leave the monitor in its protective foam packaging. Align the stand bracket to the
monitor groove.
2. Tighten the stand bracket with screws.
3. Connect the base to the stand and tighten the base screw to secure the base.
4. Make sure the stand assembly is properly installed before setting the monitor
upright.
⚠
Important
∙ Place the monitor on a soft, protected surface to avoid scratching the display panel.
∙ Do not use any sharp objects on the panel.
∙ The groove for installing the stand bracket can also be used for wall mount. Please
contact your dealer for proper wall mount kit.
Optix G274
1
2
3

5
Getting Started
Optix G274R/ Optix G274RW
1
2
3

6Getting Started
Adjusting the Monitor
This monitor is designed to maximize your viewing comfort with its adjustment
capabilities.
⚠
Important
∙ Avoid touching the display panel when adjusting the monitor.
∙ Please slightly tilt the monitor backwards before pivoting it.
Optix G274
-5° 20°

7
Getting Started
Optix G274R/ Optix G274RW
130mm
-5° 20°
90° 90°
45° 45°

8Getting Started
Monitor Overview
Optix G274
1 2
1
2
3
4 5 6 7

9
Getting Started
Optix G274R/ Optix G274RW
1 2
1
2
3
4 5 6 7

10 Getting Started
1Power LED
Lit in white after the monitor is turned on. If no signal input, the LED will
turn into orange. Lit in orange when the monitor is in Stand-by mode.
2Power Button & Navi Key
3Cable Routing Hole
4HDMI 2.0 Port
5DisplayPort 1.2 Port
6Headphone Jack
7Power Jack