multicomp pro MP780117 User manual

1
Digital Temperature and Humidity Meter
Model No. MP780117

2
Read all instructions before using the appliance and retain for future reference.
• Please follow all safety operation instructions.
• Children should be supervised to ensure that they do not play with the product.
• Do not use the monitor if the casing is damaged or there is any anomaly that may
impair it’s function.
• Do not use the product for any purpose other than that for which it is designed.
• Do not operate the product around explosive gas, vapour, or dust.
• Do not operate or store in an environment of high humidity or where moisture may
enter the product.
• Turn the meter off when not in use to save the battery.
• Remove the battery if the monitor is not to be used for long periods.
• Replace the battery as soon as the low battery warning appears on the display to
avoid possible incorrect readings.
PRODUCT OVERVIEW
WHAT’S INCLUDED
• Temperature and Humidity monitor
• Instruction manual
• Probe and test lead
• Batteries
IMPORTANT SAFETY INFORMATION
1. Maximum value
2. Minimum value
3. Data hold
4. Low battery warning
5. Relative humidity
6. Fahrenheit ident
7. Centigrade ident
8. Temperature value
9. Auto power off
10. Humidity value
1. Sensor
2. Test lead handle
3. LCD screen
4. Function key
5. Probe holder

3
• Clean the casing using a moist cloth and mild
detergent. Do not use any form of solvents.
• There are no user serviceable parts inside.
• When the low battery symbol displays on the LCD,
replace the three AAA batteries in the back of the
meter to avoid any inaccuracies in readings taken.
OPERATION
MAINTENANCE
Power button
• Press and hold the power button to turn the meter on.
• Short press the power button to turn the meter off.
• Press and hold the power button to enable or disable auto power off function.
oC/oF button
• Short press to switch between temperature units oC or oF.
Mode button
• Short press to switch between max, min and normal value recorded.
HOLD button
• Short press to enable or disable the data hold function.
• Press and hold to turn on or off the LCD backlight feature.
Function Description
Unit switch Selectable temperature unit
Extreme value Maximum/Minimum value
Data hold HOLD symbol is displayed
Overload alarm
When the humidity exceeds 100%RH 100%RH is displayed.
When the temperature exceeds 60oC OL is displayed.
When the temperature is below 20oC -OL is displayed
Backlight LCD Backlight on/off function
Auto power off The meter will turn the power off if not operated for approx 5
minutes
Sampling range Once per second
Drop test 1m
Battery 1.5V 3 x AAA
Environment Indoor 0oC~40oC (<90%RH)
Storage Indoor -20oC~60oC (<75%RH)
Altitude 2000m
Pollution grade 2

4
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
These symbols indicate that separate collection of Waste Electrical and Electronic Equipment
(WEEE) or waste batteries is required. Do not dispose of these items with general household
waste. Separate for the treatment, recovery and recycling of the materials used. Waste batteries
can be returned to any waste battery recycling point which are provided by most battery retailers.
Contact your local authority for details of the battery and WEEE recycling schemes available in
your area. Made in China. LS12 2QQ
Man Rev 1.0
SPECIFICATION
Function Range Resolution Accuracy Note
Humidity 0~100.0%RH 0.1%RH 20~80%RH ±5%RH
Other ±8%RH
Ambient
Temperature
Temperature -10~60oC 0.1oC ±1.0oC
14~140oF 0.2oF ±2.0oC