2
IMPORTANT SAFETY INFORMATION
OPERATION
• Install a standard 9V battery noting correct polarity.
• Press and hold the light/zero button to reset the device and adjust to zero.
• Point the device towards an operating microwave oven, keeping two inches away
from the door seals or the front glass of the oven.
• Then you may begin to take your readings, the values will display on LCD.
• To activate the meter, press the power on button.
• If you press the MAX key, the maximum reading will be stored in memory and
displayed on the LCD.
• To power off the meter, press the power button again.
FEATURES
Please read these instructions carefully before use and retain for future reference.
• According to a survey done by professional service associates, 56% of microwave
ovens used for more then 2 years can possibly leak levels of radiation 10% higher
than the safety standard of 5mW/cm2.
• It will be vulnerable and uncomfortable for people if the microwave radiation
exposure level exceeds 5mW/cm2.
• Microwave radiation is odorless and invisible. Its leakage can be caused by
slamming the oven door, leaving food particles in the hinges or seals and moving
the oven around etc.
• To keep people from this danger and nd out the emergency immediately, we
suggest to use our new model of LCD digital readout microwave leakage meter
for the household security.
• The meter is a high quality consumer product with the latest technology that
utilizes an advanced sensor for detecting the microwaves leaking from the oven.
• The highly sensitive sensor can detect the microwave accurately, even at low
volumes preventing potential injury from the radiation of the microwave.
• The usage of this meter can be a very important addition to home safety.
• LCD Digital readout.
• Leakage volume of dangerous levels will sound an audible alarm and a red
warning lamp will ash.
• Low leakage volume will display for information.
• Erganomic design suitable for operation using left or right hand.
• Battery life of more than 1 year.
• High sensitivity to the microwave radiation.
SPECIFICATIONS
• Calibrated at 2450MHz
• Range: 0- 9.99 mW/.cm2
• Warning value: 5.0 mW/cm2
• Power source: 9V PP3 battery
Made in China
www.multicomppro.com
