MULTISPAN MVC-72N User manual

www.multispanindia.com
Page - 1MVC-72N
Vibration Control output (1 to 99%) 5A
Power ON, Run, STOP
Power Supply 230V AC, 50 Hz, Approx 4VA
Model
Display
Size(HXWXD)
Panel Cutout
Input
Output
Indication
MVC-72N
72 X 72 X 45 mm
68 X 68 mm
2 Digit 7 seg 0.56” Red LED Display
NPN/PNP Proximity (Selectable)
Technical Specification
Connection Diagram
Technical Specification
Connection Diagram
MVC-72N
OPERATING MANUAL
Digital Vibrator Controller
1
3
2
5
6
7
8
94
LN
!
O/P
Vibrator
230V AC
50 Hz,4VA
+12V NPN
I/P
PNP
I/P
GND
5 AmP
FUSE
www.multispanindia.com
Made in India

www.multispanindia.com
Page - 2
MVC-72N
Product improvement and upgrade is a constant procedure. So for more updated operating information and support,
Please contact our Helpline : [phone]/76/82 or Email at [email protected] Ver:2008
Working
1). Do all the wiring connections according to connection diagram &
Power on the instrument
2). When instrument is turn ON output arises according to indication of the display &
RUN (Green LED) will glow.
3). Output remains OFF until proxy pulse arises, STOP (Yellow LED) will glow & as soon
as the pulse goes OFF, output turns ON.
* Switch ON/OFF the instrument
* Decrease vibration output
* Increase vibration output
i.e
PWR (Red LED) - Power ON
RUN (Green LED) - Vibrator ON
STOP (Yellow LED) - Vibrator OFF
(Proxy Pulse ON = Output remains OFF) & indication of display actual Value
(Proxy Pulse OFF = Output remains ON) & indication of display will show actual
reading