Multistore MSM 400J3 User manual

ASSEMBLY INSTRUCTIONS FOR MSM 400J3
HARDWARE LIST
9 Nevilles St, Underwood, Brisbane, QLD 4119
Ph: 07 3208 6799 Fax: [phone]
Int Ph: [phone] Int Fax: [phone]
Email: [e-mail]
www.multistore.com.au
© Multistore Industries (Aust) Pty Ltd

INSTRUCTIONS:
•Lay cabinet gables marked A&Eon floor and attach the metal cabinet runners to the
cabinet gables refer to Diagram 1.
•It is important that the runners are fixed to the correct cabinet gables, fix runner marked CL
to cabinet gable Aand fix runner marked CR to cabinet gable E using the special 7.5mm
Euro screws provided.
•Important: Please note DIAGRAM 2 this shows the positions of the holes that the metal
runners are fixed into.
© Multistore Industries (Aust) Pty Ltd
METAL RUNNER POSITIONING FOR MSM 400J3

ASSEMBLY INSTRUCTIONS FOR DRAWER BOX
AND METAL RUNNER
9 Nevilles St, Underwood, Brisbane, QLD 4119
Ph: 07 3208 6799 Fax: [phone]
Int Ph: [phone] Int Fax: [phone]
Email: [e-mail]
www.multistore.com.au
© Multistore Industries (Aust) Pty Ltd
CAREFULLY REMOVE DRAWERS FROM THE
CARTON AND LAY FLAT ON THE FLOOR.
PLACE A FEW DROPS OF WOOD GLUE
(NOT SUPPLIED) IN DOWEL HOLES AND V
JOINTS
(REFER DIAGRAM)
STEP 1.
GLUE IS OPTIONAL/NOT SUPPLIED
STEP 2.
PLACE THE DRAWER BOTTOM INTO
GROOVE ON THE DRAWER WITH THE WHITE
SIDE TO THE TOP OF THE DRAWER.
GENTLY FOLD THE REMAINING SIDES
AROUND THE DRAWER BOTTOM UNTIL
DOWELS ARE ALIGNED WITH HOLES, PUSH
DOWN FIRMLY AND WIPE OFF ANY EXCESS
GLUE FROM JOINTS.
STEP 3. TURN DRAWER BOX UPSIDE DOWN.
TAKE RUNNER, INSERT THE TAB INTO 5mm
HOLE IN BACK OF DRAWER PUSH
FORWARD AND THEN PUSH DOWN SO THE
FRONT OF THE TAB WILL ALIGN WITH 5mm
HOLES IN THE FRONT OF THE DRAWER
ONCE FIRMLY IN PLACE USE 5/8 X 6
SCREWS PROVIDED TO FIX RUNNER.
BY USING THE 12mm X 5mm BOLT SUPPLIED
INSERT INTO 5mm PRE-DRILLED HOLES IN
FRONT OF DRAWER.
ALIGN THE ALUMINIUM HANDLE WITH ONE
END OF THE DRAWER AND TIGHTEN SCREW.
DO THE SAME FOR THE OTHER END.
DO NOT OVER TIGHTEN SCREWS.
STEP 4.
DRAWER BOTTOM
5/8 X 6 SCREW TO
FIX RUNNER
BACK OF
DRAWER
5mm HOLES TO
TAKE QUICK FIX
RUNNER

WARRANTY
9 Nevilles St, Underwood, Brisbane, QLD 4119
Ph: 07 3208 6799 Fax: [phone]
Int Ph: [phone] Int Fax: [phone]
Email: [e-mail]
www.multistore.com.au
© Multistore Industries (Aust) Pty Ltd
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement of refund for
major failure.
5 Year Warranty
•If the purchaser has a fault or defect with this product, the purchaser
needs to contact Multistore Industries (AUST) directly on [phone]
and state date of purchase, place of purchase and proof of purchase.
•Multistore Industries (AUST) will replace any faulty or defect parts at no
cost to the customer. A replacement will be sent to you as soon as
possible, or product can be exchanged at the store of purchase.
•This warranty is in addition to other rights and remedies of the customer
under law.
Sincerely,
Multistore Industries (AUST) Management