Multistore MAXI ULTRA-HS CLASSIC Series User manual

CLASSIC RANGE
Assembly InstructIons
PACK
1
HAngIng
rAIL
1
FIXeD
SHeLF
1
1495H x 608W x 430D
WHITE #2669940 LIgHT Oak #2683486 Dark COCO #2683524
mAXI uLtrA-HS

ASSEMBLY INSTRUCTION FOR MAXI ULTRA HS
1 x CAM SHELF
2 x FIXED SHELF
1 BOTTOM KICK
PARTS IDENTIFICATION LIST
4
NO MODEL DESCRIPTION QTY
1CONFIRMAT SCREWS 50mm x 5mm 14
2CAPS 14
3RAIL FLANGES SET OF 2 1
4BACKING NAILS 60
5 710 x 30mm HANGING RAIL 1
616mm WOOD SCREW 2
NO MODEL DESCRIPTION QTY
7WHITE CAMS 4
8CAM PINS 4
916mm PAN HEAD SCREWS 1
10 25mm PAN HEAD SCREWS 1
11 “L” SAFETY BRACKET 1
When aaching unit to wall put safety bracket in
middle of unit with 16mm pan head screw then
25mm pan head screw into wall. For plasterboard
without a stud it is recommended to use a plug with
screw (not provided).
TOP of UNIT
1 x L & R GABLE

FOLD OUT THE BACK, PROCEED TO NAIL IT
INTO POSITION MAKING SURE YOU ARE
SQUARE ALL TIMES.
NEXT STEP.
TAP INTO POSITION YOUR
FLANGES INTO THE HOLES
PROVIDED IF WISH YOU
CAN PUT 1 SCREW IN THE
FLANGE IN THE WHOLE
PROVIDED, NOW INSERT
YOUR HANGING RAIL.
YOUR UNIT IS NOW READY
TO BE PUT INTO PLACE.
INSERT YOUR 4 PINS (7) INTO
THE HOLE NO: (8) PROVIDED.
INSERT THE CAMS INTO THE
HOLES PROVIDED ON THE
BOTTOM OF THE SHELF.
USING SCREW DRIVER TWIST
CAM INTO LOCK POSITION.

multistore.com.au
Multistore Industries (Aust) Pty Ltd
9 Nevilles Street, Underwood QLD 4119 P:[phone] [email protected]
For easy assembly instructions, please refer to video on our website: www.multistore.com.au
Versatile Storage Units
for any room