Multistore MAXI 16 User manual

TOP of UNIT
When aaching unit to wall put safety bracket in
middle of unit with 16 Pan head screw then 25mm
Pan head screw into wall.
For plasterboard without a stud it is recommended
to use a plug with screw (not provided).
ASSEMBLY INSTRUCTION FOR MAXI & MSM C16
PARTS IDENTIFICATION LIST
NO MODEL DESCRIPTION QTY
1CONFIRMAT SCREWS 20
2CAPS 20
3BACKING NAILS 75
4HANDLES 5
NO MODEL DESCRIPTION QTY
5SHELF PINS 4
6BRACKETS 1
7BRACKET UNIT SCREW 1
8BRACKET WALL SCREW 1

PROCEED TO UN-FOLD YOUR BACK BOARD AND
PROCEED TO NAIL IT INTO POSITION MAKING
SURE YOU ARE SQUARE AND ON THE EDGE AT
ALL TIMES.
STAND YOUR UNIT UP AND PROCEED TO INSERT YOUR ADJUSTABLE SHELVING.
PUSH THE 4 SHELF PINS INTO THE HOLES PROVIDED (5) ON EITHER SIDE FOR YOUR SHELF TO SIT ON, THE BEST WAY TO DO
THIS IS TO COUNT YOUR HOLES UP FROM THE BOTTOM SO YOUR SHELF WILL BE LEVEL.
YOU MAY CHOOSE WHERE YOU WOULD LIKE THESE TO SIT.
PROCEED TO PART 2
FOR INSTRUCTIONS ON HOW TO
ASSEMBLE YOUR DRAWERS