Multistore MAXI ULTRA-315C User manual

TOP of UNIT
When aaching unit to wall put safety bracket in
middle of unit with 16 Pan head screw then 25mm
Pan head screw into wall.
For plasterboard without a stud it is recommended
to use a plug with screw (not provided).
ASSEMBLY INSTRUCTION FOR MAXI ULTRA-315C
2 x GABLES
1 x BACKING BOARD FOLD LINE
3 x FIXED SHELF 1 x SAFETY BRACKET
1 x ADJUSTABLE
SHELF
PARTS IDENTIFICATION LIST
NO MODEL DESCRIPTION QTY
1CONFIRMAT SCREWS 14
2WHITE CAPS 14
3SUPPORT PINS 4
4BACKING NAILS 40
NO MODEL DESCRIPTION QTY
516 PAN HEAD SCREWS 1
625mm PAN HEAD SCREWS 1
7“L” SAFETY BRACKET 1
1 x BOTTOM KICK
AF
GB
C ,D & E
H

INFILL
YOU WILL NEED TO RETRIEVE THE INFILL FROM PART 2,
USING 3 X 30mm SCREWS PROVIDED, ATTACH THE INFILL
TO THE UNDER-SIDE OF THE CAM SHELF BEFORE PUTTING
YOUR SHELF INTO PLACE.
UNIT ASSEMBLY
Shelf Supports

RUNNER POSITIONING
MAXI ULTRA SERIES
Models Hole Positions
Maxi Ultra H1 1
Maxi Ultra HS2 1 - 6
Maxi Ultra H2 1 - 6
Maxi Ultra 450 1- 6 -11 -16
Maxi Ultra 315C 1-8 -13 -18

WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entled to a
replacement of refund for major failure.
10 Year Warranty
• If the purchaser has a fault or defect with this product, the purchaser needs to contact Mulstore Industries
(Aust) directly on [phone] and state date of purchase, place of purchase and proof of purchase.
• Mulstore Industries (Aust) will replace any faulty or defect parts at no cost to the customer. A replacement
will be sent to you as soon as possible, or product can be exchanged at the store of purchase.
• This warranty is in addion to other rights and remedies of the customer under law.
Sincerely,
Mulstore Industries (Aust) Management