Muratec Dynamo MFX-2530 User manual

for MFX-2530
Quick
Reference
Fax
Sending a fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 2
Broadcast. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4
Canceling commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6
Copy
Basic copy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8
Reduce/Enlarge copy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10
Using the bypass tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
Duplex copy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16
Just in case
Clearing document jams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 18
Clearing printout jams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22
Quick
Reference

Press FAX to change to Fax mode.
Set the document as follows:
When setting the document in the ADF When setting the document on the FBS
1. Set the document in the ADF face up.
2. Adjust the document guides.
1. Open the platen cover.
3. Close the platen cover.
2. Place the document on the FBS glass
face down and align it to the rear
left corner.
Note: The number of the pages you
can set in the ADF at one time
is 50 sheets.
Adjust the resolution and the contrast, if necessary.
Fax Sending a fax
2

Fax Ready
Nov 5 2001 13:30
Redial Group Broadcas
Fax Ready Memory 100%
Enter the fax number.
a. Enter the fax number using the numeric
keypad. d. Press
[Group] and enter the group number
using the numeric keypad.
b. Press the one-touch key.*1
c. Press SPEED DIAL/TEL INDEX and enter
the speed-dial number using the numeric
keypad.
e. Press SPEED DIAL/TEL INDEX twice and
select the number you want using the
cursor key.
Press START .When you use the FBS, press [Exit] after
you have finished scanning all pages.
Note
When the machine cannot detect the document size,
select the scanning size using the cursor key, and then
press [Enter].
*1: When you press a one-touch key, you do not need
to press START in next step.
3
15
4-c,e
4-a
34-b
ScanSize
Usecursortoselect
scanningwidth.
11x17
Letter
Legal
Enter
Auto Letter
H.LTR
H.LTR
4-d

Press FAX to change to Fax mode.
Set the document. (See page 2.)
Adjust the resolution and the contrast, if necessary.
Press [Broadcas] .
Enter the fax number.
Fax Broadcast
You can use the numeric keypad, one-touch keys, speed-dial numbers, group numbers
and Tel index.
4

Group Clear Broadcas
Transmission
Enter fax number.
_
Note
To add additional fax numbers, repeat steps 3 and 4.
Press START .
If you want to erase the fax number you've already entered, select it using the cursor key
after pressing [Broadcas] . Then press [Clear] .
5
16
4
3
4 4

Press JOB REVIEW & COMM. CANCEL.
If your machine is attempting to perform a command,
it will appear on the display. Skip to step 4.
Fax
Canceling commands
Select "Reserved Transmission" using the cursor key
and press [Enter] .
Select the command you want to cancel using the
cursor key.
6

Press [Location] to see the individual numbers within the broadcast in step 3.
To return to the previous display, press [Location] again.
Press [Erase] .
If you want to cancel another command, repeat steps 3–4.
To finish, press RESET .
Note
7
2, 3
1
2, 4

Press COPY to change to Copy mode.
Set the document as follows:
When setting the document in the ADF When setting the document on the FBS
1. Set the document in the ADF face up.
2. Adjust the document guides.
1. Open the platen cover.
3. Close the platen cover.
2. Place the document on the FBS glass
face down and align it to the rear
left corner.
Note: The number of the pages you
can set in the ADF at one time
is 50 sheets.
Adjust the document type and the contrast, if necessary.
Copy Basic copy
8

Copy Ready
Paper Zoom Sort
1
Set
100%
Press START .
Enter the number of copies using the numeric keypad.
Select the recording paper and set the advanced copy
features, if necessary.
Note
Any time you press RESET , the machine resets the display to the initial screen and
press RESET again to return the machine to its initial condition.
9
16
5
3

a. Auto Reduce / Enlarge
If you want enlarged copies, use the FBS glass.
Set the document. (See page 8.)
Press REDUCE/ENLARGE to select "Auto" .
Press [Paper] and select the paper size using the
cursor key.
Copy
Reduce/Enlarge copy
10
a
a
a
a

Copy Ready
Paper Zoom Sort
1
Set
100%
Enter the number of copies using the numeric keypad.
Press START .
b. Reduce / Enlarge with a preset rate
Press [Paper] and select the paper size using the
cursor key.
If you want your machine to select the appropriate paper automatically, select "Auto" .
Press REDUCE/ENLARGE to select the desired ratio.
11
b
b
b
b
5
4
2a, 3b
3a, 2b

c. Reduce / Enlarge in 1% steps
If you want enlarged copies, use the FBS glass.
Set the document. (See page 8.)
Enter the number of copies using the numeric keypad.
Press [Zoom] .
12

Copy Ready
Use cursor or
numeric keypad
to enter ratio.
1
Set
100%Ppr. Auto
Paper Zoom Sort
Enter the desired ratio using the cursor key or
the numeric keypad.
Press START .
13
5
2, 4
34

Set the document. Open the bypass tray.
Place a sheet of paper face down on the
bypass tray. Aline the paper guides to
the sheet's edges and insert it until it
comes to a stop.
Press [Ppr.size] .
Select the desired paper size using the cursor key.
Then press [Enter] .
Copy
Using the bypass tray
When select the standard paper size
14

When select the non standard paper size
When select the custom sized paper
Press [Other] .
Select the desired paper
size using the cursor key.
Then press [Enter] .
Select "Custom" using
the cursor key.
Then press [Enter] .
Enter the horizontal and
vertical size of the paper
using the numeric keypad.
Then press [Enter] .
To change horizontal/vertical,
use or of the cursor key.
Press START .
15
If you want to use the other type of papers than the plain paper, press [Ppr.Type] after
step 4. Then select the desired paper type using the cursor key and press [Enter] .
Note

Copy Duplex copy
2-sided documents -> 1-sided copies 1-sided documents -> 2-sided copies*
2-sided documents -> 2-sided copies*
Two facing pages -> 2-sided copies*
Front and back pages -> 2-sided copies*
* : The optional duplex unit is required
to use these features.
Press COPY to change to Copy mode.
Set the document. (See page 8.)
Adjust the document type and the contrast, if necessary.
Press MENU.
Select "DuplexCopy" using the cursor key.
Then press [Enter] .
16

DuplexCopy
Use cursor to select
item. 1®2-sided
Enter
2®2-sided
2®1-sided
Book(Face)
Book(F&B)
Select the binding position using the cursor key.
Then press [Enter] .
Select the type of duplex copy using the cursor key.
Then press [Enter] .
Press START.
Note
Set the documents in the ADF as shown:
or
17
3
4
13, 4, 5 6
11

Just
Clearing
in
case
Document jams
If the ADF cover is blinking on the LCD
Open the ADF cover by holding
the ADF cover release.
Remove the original document
from the machine by turning
the green dial right.
If you cannot remove the original
document, proceed to step 3.
Open the inner cover and remove
the document by turning the
green dial right.
If you cannot remove the original
document, proceed to step 4.
18
Open & Check
the blinking
cover.
Document jam

Lift the document tray and
remove the document.
Close the inner cover and the ADF cover, making sure
both sides are snapped down securely.
If this LCD appears, you can continue
scanning from the jammed page.
If you want to continue, press [Yes] .
If you press [No] , only scanned pages will be transmitted
or copied.
Reset the documents from the jammed page and
press START .
19
Nov 26 2001 13:30
Yes No
Fax Ready Memory 99%
Fax Ready Reserved
Continue the
Storing?

If the platen cover is blinking on the LCD
Open the platen cover.
Open the ADF cover by holding the ADF cover release.
Remove the original document
from the machine by turning
the green dial right or left.
Confirm that documents do not remain in the ADF cover.
Then close the ADF cover and the platen cover.
CAUTION:
Be careful not to put your hand under
the platen cover and the ADF cover.
If you cannot see the paper under the platen cover,
remove the paper from the ADF as shown on pages 32-33.
20
Open & Check
the blinking
cover.
Document jam