Music Man BT-X32 User manual

MusicMan® * User Manual
Bluetooth In-Ear Headphone Clip Light BT-X32
With this comfortable and good fitting in-ear stereo headphone
you can enjoy music via Bluetooth and the cable lights in the
darkness
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares
that this device, to which this user manual belongs, complies with the essential
requirements of the standards referred to the Directive RED 2014/53/EU. The
Declaration of Conformity you find here: www.technaxx.de/ (in bar at the
bottom “Konformitätserklärung”). Before using the device the first time, read
the user manual carefully.
This device has a rechargeable battery. It must be fully charged before
first use. NOTE: Charge the battery of the device every 2–3 month if it is
not used! Turn OFF nearby Bluetooth devices to avoid signal
interference! WARNING: DO NOT TURN THE VOLUME TOO HIGH –
HEARING LOSS MIGHT BE THE RESULT!
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
Keep this user manual for future reference or product sharing carefully. Do the
same with the original accessories for this product. In case of warranty, please
contact the dealer or the store where you bought this product.
Warranty 2 years
Features
Music transfer & hands-free function via Bluetooth V4.0 In-Ear
Bluetooth headphone for Smartphone, Tablet, Notebook, etc. EL
luminous cable lights in the darkness EL luminous cable shines in
the darkness (you can turn it on/off for your own safety) Easy
4-button handling Clip fixed on device to attach to clothing or bags
Built-in microphone Micro USB connector for charging Soft &
tight ear hook for comfortable fitting Protection class IPX4 (splash
water proofed) Ideal for outdoor activities in the darkness Both
in-ear headphones have little magnets on one side to stick them
together easily

Technical specifications
Bluetooth / Transmitting distance BT V4.0 / A2DP / ~8m (open space)
4 Buttons EL luminous cable turn o/off Play/Pause/On/Off, Decrease
VOL/Last Track, Increase VOL/Next track
Power Built-in rechargable 200mAh lithium polymer battery 3.7V /
charging via Micro USB connector
Charging time ~3.5 hours (DC 5V/500mA power adapter)
Playing time ~4 hours (medium volume, EL light on)
Standby time ~14 hours (Bluetooth on, EL light on, no music
playing)
SNR / Impedance ≦96dB / 16 Ω
Frequency range 20Hz– 20kHz
Protection class
IPX4 (
(splash water proofed)
Weight / Dimensions 32g / Cable 35cm / (L) 5.9 x (W) 2.9 x (H) 1.9cm
Package Contents
MusicMan® Bluetooth In-Ear Headphone Clip
Light BT-X32, Micro USB charging cable, 3
different plug sizes, User Manual
Hints for Environment Protection: Packages materials are
raw materials and can be recycled. Do not disposal old
devices or batteries into the domestic waste. Cleaning:
Protect the device from contamination and pollution (use a
clean drapery). Avoid using rough, coarse-grained materials
or solvents/aggressive cleaner. Wipe the cleaned device
accurately. Distributor: Technaxx Deutschland GmbH &
Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany

Product Overview
1 Soft ear hook
2 EL luminous cable of 35cm length
3 EL luminous cable turn on/off button: Long press to turn on
EL light. Short press to adjust EL light mode. There are two EL
light modes: a) light is on all the time, b) light flashes with the
rhythm of music. (under this mode, if music stops more than 5
minutes, light turns off automatically.)
4 Button for VOL down / Last track:
Short press last track
Long press decrease volume
5 Button for VOL up / Next track:
Short press next track
Long press increase volume

6 Indicator LED: After turning on the headphone, BLUE and
RED indicator LED are blinking alternatively. BLUE indicator
LED turns solid if headphone is paired via Bluetooth.
Charging mode: RED indicator LED turns solid while charging.
RED indicator LED turns off if headphone is fully charged.
7 Button for the functions Power ON/OFF, Play/Pause,
Hands-free: Keep pressing the power button for 3 seconds
to turn on the headphone. Meanwhile, BLUE and RED indicator
LED are blinking alternatively. Under Bluetooth mode:
short press to play or pause music should someone call you,
short press to receive or end phone call double click to redial
the last outgoing call.
8 Microphone 9Micro USB charging connector
Charging the headphone
Before first use, fully load the battery with the included original Micro
USB charging cable. Connect the Micro USB charging cable to an
USB adapter* (5V/500mA) (*not included) or computer USB port,
and the other end to the Micro USB charging port of the headphone.
The RED LED shines bright while charging in the OFF status. When
the headphone is fully charged, the RED LED turns off. (We
recommend turning off the headphone while charging. Otherwise it
will take a longer time to get it fully charged.)

How to plug the headphone in and fix it with the soft ear
hook
Bluetooth
Turn on the headphone by pressing the “POWER” button (7) for 3
seconds. The BLUE-RED LED will blink alternatively. Bluetooth
works spontaneously. Open the Bluetooth option on your
Smartphone and look for the Bluetooth name “Musicman BT-X32”.
(If connection fails or a code is needed use PIN code “0000”.) After
pairing successfully, the BLUE LED is constantly on. When the
headphone is connected with your Smartphone and you receive an
incoming call, you can press the “POWER” button to take the call. To
hang up you have to press the “POWER” button again. By double
clicking the “POWER” button you can redial the last number you
have called.
Activate the luminous cable
There are two EL light modes. To activate the luminous cable long
press button (3) to turn EL light on. Short press button (3) to adjust
EL light mode:
First: Light is on all the time
Second: Light flashes with the rhythm of music.
Note: Under the second mode, if music stops more than 5 minutes,
light turns off automatically.
In the picture you see as example, how to
plug the headphone into the left ear.
The ear hook has to be fixed in your inner
ear shell.
Then the headphone has a good and
comfortable hold in your ear.

Troubleshooting
The BT-X32 powers Off or does not turn On again could be
either a low battery or a problem with the power supply charge
the BT-X32 and check the connection of the Micro-USB cable. (We
suggest charging the BT-X32 all 2-3 month if it is not used for a long
time.)
Noises are heard from the BT-X32 could be a poor Bluetooth
signal to aviod noise, stay within the Bluetooth range of ~8m.
No Bluetooth connection could be (a) the Bluetooth connection
is not in range, or (b) another mobile device (e.g. Smartphone,
Tablet) is paired with the BT-X32 (a) shorten the range to the
Smartphone, or (b) unpair the other device.
Warnings
Only charge the BT-X32 through the DC 5V Micro USB port by
using the provided original Micro USB charging cable. You also can
use an USB charging adapter but ONLY (!) up to DC 5V/500mA. Do
not (!) charge the BT-X32 with more power!
If the BT-X32 fails to link to your mobile device or if it fails to play
music after being connected, the user shall check if your mobile
device supports A2DP.
Do not attempt to disassemble the BT-X32, it may result in
short-circuit or even damage.
Do not drop or shake the BT-X32, it may break internal circuit
boards or mechanics.
Keep the BT-X32 in dry and ventilated environment. Avoid high
humidity and high temperature. Also batteries should not be
exposed to excessive heat or direct sunlight.
This BT-X32 is not water resistant; therefore keep it away from
moisture.
Keep the BT-X32 away from little children.
Table of contents
Other Music Man Headphones manuals

Music Man
Music Man BT-X43 User manual

Music Man
Music Man BT-X23 User manual

Music Man
Music Man BT-X57 User manual

Music Man
Music Man BT-X63 User manual

Music Man
Music Man BT-X42 User manual

Music Man
Music Man BT-X42 User manual

Music Man
Music Man BT–X27 User manual

Music Man
Music Man BT-X15 User manual

Music Man
Music Man BT-X43 User manual

Music Man
Music Man BT-X52 User manual