Music Man BT-X43 User manual

MusicMan® * User Manual
Active Noise Cancellation Overear Headphone
BT-X43
With this comfortable and good fitting earphones you
can enjoy wireless music via Bluetooth with
Active Noise Cancellation (ANC)
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares that this device,
to which this user manual belongs, complies with the essential requirements of the
standards referred to the Directive RED 2014/53/EU. The Declaration of Conformity you
find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Before using
the device the first time, read the user manual carefully.
This device has a rechargeable battery. It must be fully charged before first use.
NOTE: Charge the battery of the device every 2–3 month if it is not used! Turn OFF
nearby Bluetooth devices to avoid signal interference! WARNING: DO NOT TURN
THE VOLUME TOO HIGH –HEARING LOSS MIGHT BE THE RESULT!
Service phone No. for technical support: 01805 012643 (14 cent/minute from German
fixed-line and 42 cent/minute from mobile networks).
Free Email: [email protected]
Warning! Choking hazard. Small parts.
Features
Active Noice Cancellation (ANC) function up to –22dB with brilliant
sound quality Active noise & echo reduction Long playing time
~8 hours & talking time ~10 hours Wireless headphones with soft
ear shells for comfortable fit Convenient handling directly on the
headphone Music transfer & handsfree function via Bluetooth V5.0
Built-in microphone for telephone calls (reject and answering)
Pairing with Bluetooth-enabled audio devices, Smartphones,
Tablets, etc. Protection class IPX4 (splash water proofed), ideal for
outdoor and sport activities

Technical specifications
Bluetooth
BT version 5.0 / A2DP, AVRCP, HFP, HSP /
~10m transmitting distance (open space)
Bluetooth
Transmitting frequency 2.4GHz
Radiated output power max. 2.5mW
Power supply
Built-in rechargeable 250mAh lithium polymer battery
3.7V / charging via MicroUSB (DC 5V/1A)
Charging time
~2–3hours
Playing / Talking time
~8 hours (max.VOL & ANC on) / ~10 hours
Standby time
~150 hours (BT connection, no music)
SPL
109± 3dB @1kHz
Frequency range
20Hz–20kHz
ANC
–20dB ± 2dB (max. up to –22dB)
Protection class
IPX4 (splash water proofed)
Working temperature
–10°C up to +40°C
Storage temperature
–20°C up to +50°C
Weight / Dimensions
220g / (L) 20.5 (W) 14.5 x (H) 8.3cm
Package contents
MusicMan® ANC Overear Headphone
BT-X43, Micro USB charging cable, Audio
cable (3.5mm), User Manual
Hints for Environment Protection: Packages
materials are raw materials and can be recycled. Do
not disposal old devices or batteries into the domestic
waste. Cleaning: Protect the device from
contamination and pollution (use a clean drapery).
Avoid using rough, coarse-grained materials or
solvents/aggressive cleaner. Wipe the cleaned device
accurately. Distributor: Technaxx Deutschland GmbH
& Co.KG, Kruppstr. 105, 60388 Frankfurt a.M.,
Germany
Enjoy your product * Share your experience and opinion on one
of the well-known internet portals

Product overview
1
ANC LED
2
Active Noise Cancellation
Switch
3
AUX-In
4
Vol + / Next Track
5
Indicator LED
6
Power / Play / Pause
7
Vol - / Previous Track
8
MicroUSB
9
Microphone
Charging
First charge your headphone for approx. 2–3 hours (if not charged,
the headphone does not play any music).
The LED indicator lights RED while charging and turns to BLUE
when fully charged.
 Unplug the Micro USB charging cable when the headphone is
fully charged. Do not charge longer than recommended.

Pairing
Turn on the Bluetooth function on your Bluetooth-enabled device
and set it to search for Bluetooth devices.
Power off the headphone. Now press and hold the Power button
[6] for 3–4 seconds to enter pairing mode. The LED indicator flashes
RED and BLUE as your headphone searches for Bluetooth-enabled
devices.
Select and connect to “MusicMan BT-X43” from the list of found
devices. When paired, the LED indicator flashes BLUE slowly and
the headphone enters standby mode.
Operation
How to change Bluetooth devices
Your headphone automatically reconnect to the most recently
paired device when it is powered on.
To pair a new device, first you must disconnect the Bluetooth
function of the current device. See the instructions of your Bluetooth
device for details.
General hints before start using the headphone
Do not wear the headphone while driving a vehicle or cycling. This
can create a traffic hazard and is not allowed in some countries.
To protect your hearing do not listen at high volume (extended
high-volume listening can lead to permanent hearing loss). Set the
volume to the lowest setting and then adjust to a comfortable level.
Avoid increasing the volume (your ears adapt to volume, so a
level that does not cause discomfort could still damage your
hearing).
How to use ANC (Active Noise Cancellation)
To enable or disable the ANC just slide the ANC Switch [2]. The
WHITE LED [1] will shine when ANC is enabled. The WHITE LED [1]
is off when ANC is disabled.

How to use the headphone functions
Function
Button
Operation
Turn on headphone
Hold for 2 seconds
Turn off headphone
Hold for 4 seconds
Adjust volume
/
Press 1x for one VOL step
Answer / End a call
Press once, while getting a
call / to end call
Reject a call
Hold for 2 seconds
Play / Pause music
Press 1x
Previous music track
(skip)
Hold for 2 seconds
Next music track (skip)
Hold for 2 seconds
Turn on/off Active Noise
Cancellation (ANC)
Switch to green / red
Warnings
Only charge the BT-X43 using the provided Micro USB charging
cable. You also can use an USB charging adapter but ONLY (!) up
to DC 5V/1A. Do not (!) charge the BT-X43 with more power! If the
BT-X43 fails to link to your mobile device or if it fails to play music
after being connected, the user shall check if your mobile device
supports A2DP. Do not disassemble the BT-X43, it may result in
short-circuit or damage. Do not drop or shake the BT-X43, it may
break internal circuit boards or mechanics. Keep the BT-X43 in
dry and ventilated environment. Avoid high humidity and high
temperature. Also batteries should not be exposed to excessive heat
or direct sunlight. This BT-X43 is not water resistant; therefore
keep it away from moisture. Keep the BT-X43 away from little
children.
Keep this user manual for future reference or product sharing
carefully. Do the same with the original accessories for this product.
In case of warranty, please contact the dealer or the store where you
bought this product. Warranty 2 years