MuxLab 500465 User manual

© MuxLab Inc. 94-000746-A SE-000746-A
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: [phone] Fax: [phone]
Toll Free (North America): [phone]
E-mail: [email protected] URL: www.muxlab.com
Specifications
Environment HDMI 1.3a
Devices DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting
HDMI.
Transmission Transparent to the user
Bandwidth 225 MHz
Signals HDMI 1.3a
Supported Resolution 480i, 576i, 720p, 1080i, 1080p/23.98/24/25/29.9/30/50/59.94/60
Connectors One (1) HDMI receptacle.
Two (2) BNC Female 75 Ohms.
Note: HDMI cables not included.
Maximum Distance
Based on a maximum
length of 6.6 ft (2 m) of
HDMI cable per end.
480i: RG-59: 650 ft (198 m) RG-6: 800 ft (244 m)
720p, 1080i: RG-59: 500 ft (152 m) RG-6: 650 ft (198m)
1080p: RG-59: 250 ft (76 m) RG-6: 300 ft (91 m)
Cable One (1) RG-59 or better cable required
Power Supply Two (2) 110-240V/5VDC power supplies with interchangeable blades
Power Consumption Transmitter: 3.30 Watt Receiver: 3.55 Watt
Temperature Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure Metal
Dimensions 4.72” x 3.54” x 1.18” (12.0 x 9.0 x 3.0 cm)
Weight 1.3 lb (0.59 kg)
Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty 2 years
Order Information 500465 HDMI Over Coax Extender Kit
HDMI Over Coax Extender Kit
500465
Quick Installation Guide
Overview
The HDMI Over Coax Extender Kit (500465) allows HDMI equipment to be connected
up to 250 ft (76 m) @ 1080p via one (1) RG-59 coaxial cable in a point-to-point
configuration. The Transmitter converts the HDMI signal to coax and the Receiver
converts the coax signal back to HDMI, supporting resolutions of 480i, 720p/1080i and
1080p. The kit comes with one (1) Transmitter and one (1) Receiver.
Applications
Applications include commercial and residential AV systems, classroom projector
systems, digital signage, boardroom systems, collaborative PC systems, and medical
information systems.
Installation
1. Identify the connectors on the Transmitter and Receiver as indicated on the
product labels.
2. Verify that the distance between the Transmitter and Receiver is within MuxLab
specifications (see Specifications table).
3. To install the Transmitter:
3a. Connect the Transmitter to the HDMI video source with an HDMI compliant
All manuals and user guides at all-guides.com
all-guides.com

© MuxLab Inc. 2013
cable.
3b. Connect one (1) lengths of RG-59 (or higher) grade coaxial cables to
RJ45 LINK connectors on the Transmitter.
4. To install the Receiver:
4a. Connect the Receiver to the HDMI display equipment with an HDMI compliant
cable.
4b. Connect the one (1) RG-59 coaxial cables to RJ45 LINK connectors on the
Receiver.
5. Connect the 5 VDC power supply to the Receiver first, and then plug the power
supply into an AC power outlet. Connect the 5 VDC power supply to the
Transmitter first, and then plug the power supply into an AC power outlet. If power
is present, the green power LED of the Transmitter and the Receiver will be ON.
Note: Power the HDMI Over Coax Extender only after all connections are made.
6. Power the HDMI equipment and verify the image quality.
7. This product can be daisy chained by connecting additional Receivers to the
second port. This is achieved by connecting the BNC output of the first HDMI
Receiver to the BNC input of the cascade receiver.
8. The following diagram shows the final configuration.
Troubleshooting
The following table describes some of the symptoms, probable causes and possible solutions
in respect to the installation of the HDMI Over Coax Extender Kit:
Tx LEDs Rx LEDs
Symptom Power HDMI Coax Power HDMI Coax
Probable
Cause
Possible
Solutions
No Image OFF OFF OFF OFF OFF OFF No power • Check power
connections
No Image ON OFF OFF ON OFF OFF Source • Check the HDMI
cable at the source.
No Image ON ON OFF ON OFF OFF Resolution • Check if the source
resolution is valid.
No Image ON ON ON ON OFF OFF Coaxial Cable • Check the coaxial
cable.
No Image ON ON ON ON OFF ON Display • Check the HDMI
cable at the display.
Flickering
Image
ON ON ON ON ON ON Synchronization • Check cable length
• Check the HDMI
Cable Quality.
Choppy sound ON ON ON ON ON ON Synchronization • Check cable length
• Check the HDMI
Cable Quality.
If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at
877-689-5228 (toll-free in North America) or ([phone] (International).
All manuals and user guides at all-guides.com