MuxLab 500550 User manual

Dante 2-Channel USB Audio Encoder/Decoder
User Manual
500550
© MuxLab Inc. 2023 1 94-001003-A/SE-001003-A

Dante 2-Channel USB Audio Encoder/Decoder
Table of Contents
1. Safety Precautions....................................................................................................................................................3
2. Introduction................................................................................................................................................................4
3. Features.......................................................................................................................................................................4
4. Package Contents...................................................................................................................................................4
5. Specifications............................................................................................................................................................5
6. Operation Controls and Functions....................................................................................................................6
8. Application Diagram...............................................................................................................................................7
© MuxLab Inc. 2023 2 94-001003-A/SE-001003-A

Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.
Do not dismantle the housing or modify the module. It may result in electrical shock or
burns.
Do not open or remove the housing of the device as you may be exposed to dangerous
voltage or other hazards.
To prevent fire or shock hazard, do not expose the unit to rain, moisture and do not install
this product near water. Keep the product away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an
object or liquid falls or spills on the housing, unplug the module immediately.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
Using supplies or parts not meeting the product specifications may cause damage,
deterioration or malfunction.
Refer all servicing to qualified service personnel.
Install the device in a place with adequate ventilation to avoid damage caused by
overheat.
Unplug the power when left unused for a long period of time.
Information on disposal of devices: do not burn or mix with general household waste,
please treat them as normal electrical waste.
1. Safety Precautions
To ensure the best performance from the product, please read all instructions carefully before
using the device. Save this manual for future reference.
Copyright Notice
All contents in this manual are copyrighted, and cannot be cloned, copied, or translated
without the express permission of MuxLab Inc. Product specifications and information in this
document are for reference only, and the content may be updated from time to time without
prior notice.
© MuxLab Inc. 2023 3 94-001003-A/SE-001003-A
Dante 2-Channel USB Audio Encoder/Decoder

Compliant with USB 2.0 Full Speed Operation
Compliant with USB Audio Device Class Specification V1.0
Analog sound card, supporting MIC input and SPK output
Audio sampling rate supports 44.1kHz, 48kHz and 96kHz (24bit)
Dante solution supports AES67 RTP audio transmission
Support USB 5V power supply and PoE function (IEEE802.3af Class0)
3. Features
2. Introduction
The Dante 2-Channel USB Audio Encoder/Decoder (Model: 500550) is designed to both
encode 2ch USB audio to a Dante digital signal, and decode a Dante digital signal to 2ch
USB audio. The unit is plug & play and can be powered using either PoE from any PoE network
switch or via 5V from the USB device; In addition, the product is compact and easy to carry.
One (1) Dante 2-Channel USB Audio Encoder/Decoder
One (1) USB Cable (6FT USB A to USB B)
One (1) User manual (available via download)
4. Package Contents
Notes ： Confirm that the product and accessories are all included. If not, please contact the
supplier from which you purchased the unit.
© MuxLab Inc. 2023 4 94-001003-A/SE-001003-A
Dante 2-Channel USB Audio Encoder/Decoder

5. Specifications
© MuxLab Inc. 2023 5 94-001003-A/SE-001003-A
Dante 2-Channel USB Audio Encoder/Decoder
Video Network Bandwidth
Transmission Distance
Control Method
Dimensions (WxDxH)
Weight
Input & Output
Power Supply
Power Consumption
Color
Dante Controller
Housing
Storage temperature
Relative Humidity 20 - 90% RH (no condensation)
Audio Formats
Operation Temperature
Warranty
Order Information
100M
PCM 2.0 44.1kHz/48kHz/96kHz up to 24bit
100m (CAT6/6A)
1 x USB-B
Technical
186g
USB input: 5V-500MA PoE input: IEEE802.3af Class 0
1W
Black
32 - 104°F / 0 - 40°C
Metal Enclosure
-4 - 140°F / -20 - 60°C
Connection
1 x DANTE [RJ45 connector, PoE]
Mechanical
120mm[W] x 47mm[D] x 26mm[H]
2 years
500550 Dante 2 Channel USB Audio Encoder/Decoder (UPC: 627699005507)