myPhone CUBE User manual

© 2014 myPhone. All rights reserved. myPhone CUBE ENG
USER MANUAL

Tech specification:
•RAM Memory: 1GB
•16GB internal memory
•1800mAh battery
•input and output charger parameters: 100-2 0V AC,
50/60Hz, 150mA
-output: 5V DC, 1000mA
•Power the phone under standard conditions:
-5V DC, 500mA
•Smartphone`s weight: 1 6g
SIM card inserting
myPhone CUBE is a mobile phone using
Dual SIM technology. Dual SIM allows you to use two mobile
netwo ks at the same time. To inse t the SIM ca d co ectly follow
the inst uctions:
•Tu n off the phone, emove the back cove (unde mining the
slot located in the left co ne of the base of the phone with
you nail) and pull out the batte y.
•Inse t the SIM ca d into the slot following the pictu es f om
above and below the socket.
MICRO SIM ADAPTERS
Do not install hollow (with no ca d) mic o-SIM ca d adapte in you
sma tphone. This will cause a jam. Attempt to d aw jammed adapte
back f om the slot can cause mechanical damage of the phone. If
SIM ca d adapte deadlocks in the socket, you should contact an
autho ized myPhone se vice!
Memory card inserting
Use only memo y ca ds compatible and app oved by myPhone.
Incompatible memo y ca d may damage itself and the device and
emove sto ed data. Incompatibility of memo y ca d can be caused
by inco ect ca d fo mat (mic o SD fo mat is equi ed) o
unsuppo ted ca d size (ove 32GB). To inse t the memo y ca d

co ectly follow the di ections:
•Tu n off the phone and take off the back cove (unde mining
the slot located in the left co ne of the base of the phone with
you nail).
•The memo y ca d slot is located above the batte y on the ight.
Following the d awing inse t the memo y ca d into the slot.
Battery inserting
To inse t the batte y:
•Tu n the phone back cove up.
•Take off the back cove (unde mining the slot located in the left
co ne of the base of the phone with you nail).
•Inse t the batte y (pay attention to the co ect o ientation of the
batte y contacts and phone contacts – these should be
adjacent to each othe ).
•Replace the back cove .
Battery charging
The batte y should be cha ged p io to the fi st tu ning on the
device. Cha ge the batte y with the kit cha ge . The device has a
batte y capacity of 1800mAh. In case of any p oblems with the
batte y - the device must be p ovided to myPhone se vice cente .
Use only cha ge s and cables app oved by myPhone. Using
unapp oved cha ge s o cables could cause an explosion o
damage the batte y in othe way.

Front view:

Rear view
Num e
rSym ol Function
1 Touch screen 5"
2 Digital camera lens 2.0Mpx
3 Internal speaker

4 Proximity and rightness sensor
5 microphone
6 Menu Button
7 Home Button
8 Back Button
9 - Keypad lock
10 - Volume control
11 Multifunctional micro-B USB slot
12 Headphones slot mini jack 3.5mm
13 Digital camera lens 8.0Mpx
14 LED illuminates
15 External speaker
The SIM card must e inserted in such a manner as shown
in the figures a ove and elow the SIM socket. There are two
SIM card slots: SIM1 supports WCDMA and GSM, and SIM2
supports only the GSM network.
Turning on/off the phone
To turn on the phone press and hold (for a out 3 seconds)the
keypad lock key. To turn the phone off press and hold (for
a out 3 seconds) the keypad lock key and select: [Power off].
Indicator icons
Icon Description
Battery status
Active connection to a Wi-Fi network

New e-mail
New SMS
Network signal strength
Active 3G network
Active 2G network
Missed call
Active call
Held call
The device is connected to a computer
Active Bluetooth mode
Active alarm
Flying mode
Speakerphone
Sound profile set to vi rations
Declaration of conformity with EU Directives
myPhone Sp. z o.o. declares that this product is
compati le with the essential requirements and other
important recommendations of the European Directive
1999/5/EC – and all other EU directives.
On the we site: www.myphone.pl/certyfikaty.aspx you can see
the declaration of compliance for a given product, choosing
its name from the list.
Attention: Some of the alerts in your phone may appear in
English.