myPhone H-Smart User manual

© 2014 myPhone. All rights reserved. myPhone Iron ENG
USER MANUAL

Tech specification:
•RAM Memory: 1GB
•Dual Core Cortex A9 1.3GHz processor
•3,5” capac t ve touch screen w th 320 x 480 px resolut on
•4GB nternal memory
•1800mAh battery
•Frontal camera resolut on: 0.3 Mpx
•Rear camera resolut on: 2.0 Mpx
•nput and output charger parameters:
-nput: 100-240V AC, 50/60Hz, 200mA
-output: 5V DC, 1000mA
•Netto we ght: 157g, brutto we ght 206g
SIM card inserting
myPhone CUBE is a mobile phone using
Dual SIM technology. Dual SIM allows you to use two mobile
netwo ks at the same time. To inse t the SIM ca d co ectly follow
the inst uctions:
•Tu n off the phone, emove the back cove (unsc ew both bolts
located on back cove ) and pull out the batte y.
•Inse t the SIM ca d into the slot following the pictu es next to
the socket.
MICRO SIM ADAPTERS
Do not install hollow (with no ca d) mic o-SIM ca d adapte in you
sma tphone. This will cause a jam. Attempt to d aw jammed adapte
back f om the slot can cause mechanical damage of the phone. If
SIM ca d adapte deadlocks in the socket, you should contact an
autho ized myPhone se vice!
Memory card inserting
Use only memo y ca ds compatybile and app oved by myPhone.
Incompatible memo y ca d may damage itself and the device and
emove sto ed data. Incompatibility of memo y ca d can be caused
by inco ect ca d fo mat (mic o SD fo mat is equi ed) o
unsuppo ted ca d size (ove 32GB). To inse t the memo y ca d

co ectly follow the di ections:
•Tu n off the phone and take off the back cove (unsc ew both
bolts located on back cove ).
•The memo y ca d slot is located above the SIM slot on the
ight. Following the d awing inse t the memo y ca d into the
slot.
Battery inserting
To inse t the batte y:
•Tu n the phone back cove up.
•Take off the back cove (unsc ew both bolts located on back
cove ).
•Inse t the batte y (pay attention to the co ect o ientation of the
batte y contacts and phone contacts – these should be
adjacent to each othe ).
•Replace the back cove and tighten both sc ews.
Battery charging
The batte y should be cha ged p io to the fi st tu ning on the
device. Cha ge the batte y with the kit cha ge . The device has a
batte y capacity of 1800mAh. In case of any p oblems with the
batte y - the device must be p ovided to myPhone se vice cente .
Use only cha ge s and cables app oved by myPhone. Using
unapp oved cha ge s o cables could cause an explosion o
damage the batte y in othe way.

Phone design

The S M card must be inserted in such a manner as shown
in the figures above and below the S M socket.
Number Symbol Function
1 Touch screen 3,5"
2 Digital camera lens 0,3 Mpx
3 - Proximity and light sensor
4 nternal speaker
5 Microphone
6 Home button
7 Menu button
8 Back button
9 Search button
10 - On/off / keypad lock button
11 - Volume button
12 Multifunctional micro-B USB slot
13 Headphones slot mini jack 3.5mm
14 Digital camera lens 2,0 Mpx
15 LED light
16 External speaker

Turning on/off the phone
To turn on the phone press and hold (for about 3 seconds)the
keypad lock key. To turn the phone off press and hold (for
about 3 seconds) the keypad lock key and select: [Power off].
Indicator icons
con Description
Battery status
Active connection to a Wi-Fi network
New e-mail
New SMS
Network signal strength
Active 3G network
Active 2G network
Missed call
Active call
Held call
The device is connected to a computer
Active Bluetooth mode
Active alarm
Flying mode
Speakerphone
Sound profile set to vibrations
Declaration of conformity with EU Directives

myPhone Sp. z o.o. declares that this product is
compatible with the essential requirements and other
important recommendations of the European Directive
1999/5/EC – and all other EU directives.

Attention: Some of the alerts in your phone may appear in
English.