
Clean & Disinfect
Steps:
1. Clean as usual with your local
CDC protocol.
2. To remove from solution:
a. hold mouthpiece with the
back of it towards the palm of
your hand.
b. squeeze the cheeks.
c. pour cleaning solution from
the hole in the mouth.
d. continue squeezing the mouth-
piece and shake it vigorously
2 or 3 time to assist in removing
excess moisture.
3. Place mouthpiece onto its cheek
on a flat surface.
4. Let air dry 1 hour to ensure that
the interior of the mouthpiece
thoroughly dries.
Return Policy
Should it be necessary to return
an item for credit or for any other
reason, contact our Customer
Care Department to obtainan RGA
Number. Please refer to your invoice
number when phoning in your
request for returning merchandise.
Should you have any questions
NASCO HEALTHCARE
16 Simulaids Drive
Saugerties, NY 12477
1-833-NASCOHC (627-2642)
info@nascohealthcare.com
www.nascohealthcare.com
HC18000028INM7- 06/21
©2021 NASCO HEALTHCARE
Clean & Disinfect
Steps:
1. Clean as usual with your local CDC protocol.
2. To remove from solution:
a. hold mouthpiece with the back of it towards the palm of
your hand.
b. squeeze the cheeks.
c. pour cleaning solution from the hole in the mouth.
d. continue squeezing the mouthpiece and shake it vigorously 2
or 3 times to assist in removing excess moisture.
3. Place the mouthpiece onto its cheek on a flat surface.
4. Let air dry for 1 hour to ensure that the interior of the mouthpiece
thoroughly dries.
WARRANTY
NASCO HEALTHCARE warrants their products to be free from defects
in materials and/or workmanship for a period of three years from
the date of purchase, as evidenced by the date on the invoice of
the product shipment to the end-user. The warranty expressly does
not cover abuse, accidental or purposeful damage, or any form of
modification to the product. NASCO HEALTHCARE reserves the right to
either replace affected parts or the entire unit, at their sole discretion,
after investigating and reviewing the actual product and the damage.
In most instances, a digital photo of the product in question showing
the damage will help qualify a product for return to the factory. At no
time will any product be accepted at the factory without proper return
authorization issued by NASCO HEALTHCARE.
Freight and shipping charges are the sole responsibility of the end user.
No product will be received with shipping charges due. Any product
considered for warranty work must be identified by serial number and
invoice number from the agency through whom the product was
purchased. Without this information, the product will not receive a
return authorization number as required.
Do not allow print material to come in contact with the skin of your
product. The ink will embed in the porous surface and be impossible
to remove. Ink stains are not covered under warranty.
Copyright © Simulaids® 2018
PP1291, PP2271, PP2275, PP2800, PP2801, PP2801E, PP2803, PP2804, PP2814, PP2827, PP2829, PP2828, PP2850, PP2856/HC18000028INM7
HEALTHCARE
HEALTHCARE
BRAD CPR
ASSEMBLY & OPERATION
INSTRUCTIONS
ONLINE: NascoHealthcare.com
PHONE: 1.800.431.4310
ADDRESS: P.O. Box 1289, 16 Simulaids Dr.
Saugerties, NY 12477
Item Description
2271
Brad Jr.
2275
Brad Jr. with Electronics
2800
Brad
2801
Brad with Carry Bag
2801E
Brad Ethnic with Carry Bag
2803
Paul with Carry Bag
2804
Jaw Thrust Brad with Carry Bag
2814
JT Brad with Electronics and Carry Bag
2827
Helal with Carry Bag
2829
Helal with Electronics and Carry Bag
2828
Brad Ethnic with Electronics and Carry Bag
2850
Brad with Electronics and Carry Bag
2856
Paul with Electronics and Carry Bag
The chart at left indicates the products that use
this instruction manual.
This manikin is intended to be used as an instructional aide in the
teaching and demonstrating of CPR procedures to individuals.
CPR MOUTHPIECE
CLEANING & DISINFECTING INSTRUCTIONS
Instructions for cleaning and disinfecting the CPR Mouthpieces, item numbers, 2023
(all versions), 2601 (all versions), 2223, 2082, 2162, 2068, 2083, 2162B, and 2069.
Clean & Disinfect
Steps:
1. Clean as usual with your local CDC protocol.
2. To remove from solution:
a. hold mouthpiece with the back of it towards the palm of you hand.
b. squeeze the cheeks.
c. pour cleaning solution from the hole in the mouth.
d. continue squeezing the mouthpiece and shake it vigorously 2 or 3 times
to assist in removing excess moisture.
3. Place mouthpiece onto its cheek on a flat surface.
4. Let air dry 1 hour to ensure that the interior of the mouthpiece thoroughly dries.
Part Numbers
2271
Brad Jr.
2275
Brad Jr. with Electronics
2801
Brad with Carry Bag
2804
Jaw Thrust Brad with Carry Bag
2805
Airway/Lung System, 24 Pack
2023
Mouth/Nose Piece, 10 Pack
2526
Carry Bag with Kneeling Pads
2280
Airway/Lung System, 24 Pack
2023ETHNIC
Mouth/Nose Piece, 10 Pack
2023EXPORT
Mouth/Lung Pieces (nares open) Export, 10 pack
Return Policy
Should it be necessary to return an item for credit or for any
other reason, contact our Customer Care Department to obtain
an RGA Number. Please refer to your invoice number when
phoning in your request for returning merchandise. Should you
have any questions or wish further information on any product
we manufacture, call or write our Customer Care Department.
Warranty
Simulaids® warrants their products to be free from defects in materials
and/or workmanship for a period of three years from the date of pur-
chase, as evidenced by the date on the invoice of the product shipment
to the end user. The warranty expressly does not cover abuse, acciden-
tal or purposeful damage, or any form of modification to the product.
Simulaids® reserves the right to either replace affected parts or the
entire unit, at their sole discretion, after investigating and reviewing the
actual product and the damage. In most instances, a digital photo of
the product in question showing the damage will help qualify a product
for return to the factory. At no time will any product be accepted at the
factory without proper return authorization issued by Simulaids®.
Freight and shipping charges are the sole responsibility of the end user.
No product will be received with shipping charges due. Any product
considered for warranty work must be identified by serial number and
invoice number from the agency through whom the product was pur-
chased. Without this information the product will not receive a return
authorization number as required.
Do not allow print material to come in contact with the skin of
your product. The ink will embed in the porous surface and be
impossible to remove. Ink stains are not covered under warranty.
HC18000028INM7.indd 1-2 8/20/18 3:52 PM
Copyright © Simulaids
®
2018
PP1291, PP2271, PP2275, PP2800, PP2801, PP2801E, PP2803, PP2804, PP2814, PP2827, PP2829, PP2828, PP2850, PP2856/HC18000028INM7
HEALTHCARE
HEALTHCARE
BRAD CPR
ASSEMBLY & OPERATION
INSTRUCTIONS
ONLINE: NascoHealthcare.com
PHONE: 1.800.431.4310
ADDRESS: P.O. Box 1289, 16 Simulaids Dr.
Saugerties, NY 12477
Item Description
2271
Brad Jr.
2275
Brad Jr. with Electronics
2800
Brad
2801
Brad with Carry Bag
2801E
Brad Ethnic with Carry Bag
2803
Paul with Carry Bag
2804
Jaw Thrust Brad with Carry Bag
2814
JT Brad with Electronics and Carry Bag
2827
Helal with Carry Bag
2829
Helal with Electronics and Carry Bag
2828
Brad Ethnic with Electronics and Carry Bag
2850
Brad with Electronics and Carry Bag
2856
Paul with Electronics and Carry Bag
The chart at left indicates the products that use
this instruction manual.
This manikin is intended to be used as an instructional aide in the
teaching and demonstrating of CPR procedures to individuals.
CPR MOUTHPIECE
CLEANING & DISINFECTING INSTRUCTIONS
Instructions for cleaning and disinfecting the CPR Mouthpieces, item numbers, 2023
(all versions), 2601 (all versions), 2223, 2082, 2162, 2068, 2083, 2162B, and 2069.
Clean & Disinfect
Steps:
1. Clean as usual with your local CDC protocol.
2. To remove from solution:
a. hold mouthpiece with the back of it towards the palm of you hand.
b. squeeze the cheeks.
c. pour cleaning solution from the hole in the mouth.
d. continue squeezing the mouthpiece and shake it vigorously 2 or 3 times
to assist in removing excess moisture.
3. Place mouthpiece onto its cheek on a flat surface.
4. Let air dry 1 hour to ensure that the interior of the mouthpiece thoroughly dries.
Part Numbers
2271
Brad Jr.
2275
Brad Jr. with Electronics
2801
Brad with Carry Bag
2804
Jaw Thrust Brad with Carry Bag
2805
Airway/Lung System, 24 Pack
2023
Mouth/Nose Piece, 10 Pack
2526
Carry Bag with Kneeling Pads
2280
Airway/Lung System, 24 Pack
2023ETHNIC
Mouth/Nose Piece, 10 Pack
2023EXPORT
Mouth/Lung Pieces (nares open) Export, 10 pack
Return Policy
Should it be necessary to return an item for credit or for any
other reason, contact our Customer Care Department to obtain
an RGA Number. Please refer to your invoice number when
phoning in your request for returning merchandise. Should you
have any questions or wish further information on any product
we manufacture, call or write our Customer Care Department.
Warranty
Simulaids
®
warrants their products to be free from defects in materials
and/or workmanship for a period of three years from the date of pur-
chase, as evidenced by the date on the invoice of the product shipment
to the end user. The warranty expressly does not cover abuse, acciden-
tal or purposeful damage, or any form of modification to the product.
Simulaids
®
reserves the right to either replace affected parts or the
entire unit, at their sole discretion, after investigating and reviewing the
actual product and the damage. In most instances, a digital photo of
the product in question showing the damage will help qualify a product
for return to the factory. At no time will any product be accepted at the
factory without proper return authorization issued by Simulaids
®
.
Freight and shipping charges are the sole responsibility of the end user.
No product will be received with shipping charges due. Any product
considered for warranty work must be identified by serial number and
invoice number from the agency through whom the product was pur-
chased. Without this information the product will not receive a return
authorization number as required.
Do not allow print material to come in contact with the skin of
your product. The ink will embed in the porous surface and be
impossible to remove. Ink stains are not covered under warranty.
HC18000028INM7.indd 1-2 8/20/18 3:52 PM
Copyright © Simulaids® 2018
PP1318/HC190012INS6
ONLINE: NascoHealthcare.com
PHONE: 1.800.431.4310
ADDRESS: P.O. Box 1289, 16 Simulaids Dr.
Saugerties, NY 12477
CPR MOUTHPIECE
CLEANING & DISINFECTING INSTRUCTIONS
Instructions for cleaning and disinfecting the CPR Mouthpieces, item numbers, 2023
(all versions), 2601 (all versions), 2223, 2082, 2162, 2068, 2083, 2162B, and 2069.
Clean & Disinfect
Steps:
1. Clean as usual with your local CDC protocol.
2. To remove from solution:
a. hold mouthpiece with the back of it towards the palm of you hand.
b. squeeze the cheeks.
c. pour cleaning solution from the hole in the mouth.
d. continue squeezing the mouthpiece and shake it vigorously 2 or 3 times
to assist in removing excess moisture.
3. Place mouthpiece onto its cheek on a flat surface.
4. Let air dry 1 hour to ensure that the interior of the mouthpiece thoroughly dries.
Part Numbers
2271 Brad Jr.
2275 Brad Jr. with Electronics
2801 Brad with Carry Bag
2804 Jaw Thrust Brad with Carry Bag
2805 Airway/Lung System, 24 Pack
2023 Mouth/Nose Piece, 10 Pack
2526 Carry Bag with Kneeling Pads
2280 Airway/Lung System, 24 Pack
2023ETHNIC Mouth/Nose Piece, 10 Pack
2023EXPORT Mouth/Lung Pieces (nares open) Export, 10 pack
Return Policy
Should it be necessary to return an item for credit or for any
other reason, contact our Customer Care Department to obtain
an RGA Number. Please refer to your invoice number when
phoning in your request for returning merchandise. Should you
have any questions or wish further information on any product
we manufacture, call or write our Customer Care Department.
Warranty
Simulaids® warrants their products to be free from defects in materials
and/or workmanship for a period of three years from the date of pur-
chase, as evidenced by the date on the invoice of the product shipment
to the end user. The warranty expressly does not cover abuse, acciden-
tal or purposeful damage, or any form of modification to the product.
Simulaids® reserves the right to either replace affected parts or the
entire unit, at their sole discretion, after investigating and reviewing the
actual product and the damage. In most instances, a digital photo of
the product in question showing the damage will help qualify a product
for return to the factory. At no time will any product be accepted at the
factory without proper return authorization issued by Simulaids®.
Freight and shipping charges are the sole responsibility of the end user.
No product will be received with shipping charges due. Any product
considered for warranty work must be identified by serial number and
invoice number from the agency through whom the product was pur-
chased. Without this information the product will not receive a return
authorization number as required.
Do not allow print material to come in contact with the skin of
your product. The ink will embed in the porous surface and be
impossible to remove. Ink stains are not covered under warranty.
PP1318 MouthPieces REBRAND.pdf 1 1/8/21 3:43 PM
NASCO HEALTHCARE
16 Simulaids Drive
Saugerties, NY 12477
1-833-NASCOHC (627-2642)
info@nascohealthcare.com
www.nascohealthcare.com
HC18000028INM7- 06/21
©2021 NASCO HEALTHCARE
Clean & Disinfect
Steps:
1. Clean as usual with your local CDC protocol.
2. To remove from solution:
a. hold mouthpiece with the back of it towards the palm of
your hand.
b. squeeze the cheeks.
c. pour cleaning solution from the hole in the mouth.
d. continue squeezing the mouthpiece and shake it vigorously 2
or 3 times to assist in removing excess moisture.
3. Place the mouthpiece onto its cheek on a flat surface.
4. Let air dry for 1 hour to ensure that the interior of the mouthpiece
thoroughly dries.
WARRANTY
NASCO HEALTHCARE warrants their products to be free from defects
in materials and/or workmanship for a period of three years from
the date of purchase, as evidenced by the date on the invoice of
the product shipment to the end-user. The warranty expressly does
not cover abuse, accidental or purposeful damage, or any form of
modification to the product. NASCO HEALTHCARE reserves the right to
either replace affected parts or the entire unit, at their sole discretion,
after investigating and reviewing the actual product and the damage.
In most instances, a digital photo of the product in question showing
the damage will help qualify a product for return to the factory. At no
time will any product be accepted at the factory without proper return
authorization issued by NASCO HEALTHCARE.
Freight and shipping charges are the sole responsibility of the end user.
No product will be received with shipping charges due. Any product
considered for warranty work must be identified by serial number and
invoice number from the agency through whom the product was
purchased. Without this information, the product will not receive a
return authorization number as required.
Do not allow print material to come in contact with the skin of your
product. The ink will embed in the porous surface and be impossible
to remove. Ink stains are not covered under warranty.
Copyright © Simulaids® 2018
PP1291, PP2271, PP2275, PP2800, PP2801, PP2801E, PP2803, PP2804, PP2814, PP2827, PP2829, PP2828, PP2850, PP2856/HC18000028INM7
HEALTHCARE
HEALTHCARE
BRAD CPR
ASSEMBLY & OPERATION
INSTRUCTIONS
ONLINE: NascoHealthcare.com
PHONE: 1.800.431.4310
ADDRESS: P.O. Box 1289, 16 Simulaids Dr.
Saugerties, NY 12477
Item Description
2271
Brad Jr.
2275
Brad Jr. with Electronics
2800
Brad
2801
Brad with Carry Bag
2801E
Brad Ethnic with Carry Bag
2803
Paul with Carry Bag
2804
Jaw Thrust Brad with Carry Bag
2814
JT Brad with Electronics and Carry Bag
2827
Helal with Carry Bag
2829
Helal with Electronics and Carry Bag
2828
Brad Ethnic with Electronics and Carry Bag
2850
Brad with Electronics and Carry Bag
2856
Paul with Electronics and Carry Bag
The chart at left indicates the products that use
this instruction manual.
This manikin is intended to be used as an instructional aide in the
teaching and demonstrating of CPR procedures to individuals.
CPR MOUTHPIECE
CLEANING & DISINFECTING INSTRUCTIONS
Instructions for cleaning and disinfecting the CPR Mouthpieces, item numbers, 2023
(all versions), 2601 (all versions), 2223, 2082, 2162, 2068, 2083, 2162B, and 2069.
Clean & Disinfect
Steps:
1. Clean as usual with your local CDC protocol.
2. To remove from solution:
a. hold mouthpiece with the back of it towards the palm of you hand.
b. squeeze the cheeks.
c. pour cleaning solution from the hole in the mouth.
d. continue squeezing the mouthpiece and shake it vigorously 2 or 3 times
to assist in removing excess moisture.
3. Place mouthpiece onto its cheek on a flat surface.
4. Let air dry 1 hour to ensure that the interior of the mouthpiece thoroughly dries.
Part Numbers
2271
Brad Jr.
2275
Brad Jr. with Electronics
2801
Brad with Carry Bag
2804
Jaw Thrust Brad with Carry Bag
2805
Airway/Lung System, 24 Pack
2023
Mouth/Nose Piece, 10 Pack
2526
Carry Bag with Kneeling Pads
2280
Airway/Lung System, 24 Pack
2023ETHNIC
Mouth/Nose Piece, 10 Pack
2023EXPORT
Mouth/Lung Pieces (nares open) Export, 10 pack
Return Policy
Should it be necessary to return an item for credit or for any
other reason, contact our Customer Care Department to obtain
an RGA Number. Please refer to your invoice number when
phoning in your request for returning merchandise. Should you
have any questions or wish further information on any product
we manufacture, call or write our Customer Care Department.
Warranty
Simulaids® warrants their products to be free from defects in materials
and/or workmanship for a period of three years from the date of pur-
chase, as evidenced by the date on the invoice of the product shipment
to the end user. The warranty expressly does not cover abuse, acciden-
tal or purposeful damage, or any form of modification to the product.
Simulaids® reserves the right to either replace affected parts or the
entire unit, at their sole discretion, after investigating and reviewing the
actual product and the damage. In most instances, a digital photo of
the product in question showing the damage will help qualify a product
for return to the factory. At no time will any product be accepted at the
factory without proper return authorization issued by Simulaids®.
Freight and shipping charges are the sole responsibility of the end user.
No product will be received with shipping charges due. Any product
considered for warranty work must be identified by serial number and
invoice number from the agency through whom the product was pur-
chased. Without this information the product will not receive a return
authorization number as required.
Do not allow print material to come in contact with the skin of
your product. The ink will embed in the porous surface and be
impossible to remove. Ink stains are not covered under warranty.
HC18000028INM7.indd 1-2 8/20/18 3:52 PM
Copyright © Simulaids
®
2018
PP1291, PP2271, PP2275, PP2800, PP2801, PP2801E, PP2803, PP2804, PP2814, PP2827, PP2829, PP2828, PP2850, PP2856/HC18000028INM7
HEALTHCARE
HEALTHCARE
BRAD CPR
ASSEMBLY & OPERATION
INSTRUCTIONS
ONLINE: NascoHealthcare.com
PHONE: 1.800.431.4310
ADDRESS: P.O. Box 1289, 16 Simulaids Dr.
Saugerties, NY 12477
Item Description
2271
Brad Jr.
2275
Brad Jr. with Electronics
2800
Brad
2801
Brad with Carry Bag
2801E
Brad Ethnic with Carry Bag
2803
Paul with Carry Bag
2804
Jaw Thrust Brad with Carry Bag
2814
JT Brad with Electronics and Carry Bag
2827
Helal with Carry Bag
2829
Helal with Electronics and Carry Bag
2828
Brad Ethnic with Electronics and Carry Bag
2850
Brad with Electronics and Carry Bag
2856
Paul with Electronics and Carry Bag
The chart at left indicates the products that use
this instruction manual.
This manikin is intended to be used as an instructional aide in the
teaching and demonstrating of CPR procedures to individuals.
CPR MOUTHPIECE
CLEANING & DISINFECTING INSTRUCTIONS
Instructions for cleaning and disinfecting the CPR Mouthpieces, item numbers, 2023
(all versions), 2601 (all versions), 2223, 2082, 2162, 2068, 2083, 2162B, and 2069.
Clean & Disinfect
Steps:
1. Clean as usual with your local CDC protocol.
2. To remove from solution:
a. hold mouthpiece with the back of it towards the palm of you hand.
b. squeeze the cheeks.
c. pour cleaning solution from the hole in the mouth.
d. continue squeezing the mouthpiece and shake it vigorously 2 or 3 times
to assist in removing excess moisture.
3. Place mouthpiece onto its cheek on a flat surface.
4. Let air dry 1 hour to ensure that the interior of the mouthpiece thoroughly dries.
Part Numbers
2271
Brad Jr.
2275
Brad Jr. with Electronics
2801
Brad with Carry Bag
2804
Jaw Thrust Brad with Carry Bag
2805
Airway/Lung System, 24 Pack
2023
Mouth/Nose Piece, 10 Pack
2526
Carry Bag with Kneeling Pads
2280
Airway/Lung System, 24 Pack
2023ETHNIC
Mouth/Nose Piece, 10 Pack
2023EXPORT
Mouth/Lung Pieces (nares open) Export, 10 pack
Return Policy
Should it be necessary to return an item for credit or for any
other reason, contact our Customer Care Department to obtain
an RGA Number. Please refer to your invoice number when
phoning in your request for returning merchandise. Should you
have any questions or wish further information on any product
we manufacture, call or write our Customer Care Department.
Warranty
Simulaids
®
warrants their products to be free from defects in materials
and/or workmanship for a period of three years from the date of pur-
chase, as evidenced by the date on the invoice of the product shipment
to the end user. The warranty expressly does not cover abuse, acciden-
tal or purposeful damage, or any form of modification to the product.
Simulaids
®
reserves the right to either replace affected parts or the
entire unit, at their sole discretion, after investigating and reviewing the
actual product and the damage. In most instances, a digital photo of
the product in question showing the damage will help qualify a product
for return to the factory. At no time will any product be accepted at the
factory without proper return authorization issued by Simulaids
®
.
Freight and shipping charges are the sole responsibility of the end user.
No product will be received with shipping charges due. Any product
considered for warranty work must be identified by serial number and
invoice number from the agency through whom the product was pur-
chased. Without this information the product will not receive a return
authorization number as required.
Do not allow print material to come in contact with the skin of
your product. The ink will embed in the porous surface and be
impossible to remove. Ink stains are not covered under warranty.
HC18000028INM7.indd 1-2 8/20/18 3:52 PM
NASCO HEALTHCARE
16 Simulaids Drive
Saugerties, NY 12477
1-833-NASCOHC (627-2642)
info@nascohealthcare.com
www.nascohealthcare.com
or wish further information on
any product we manufacture,
call or write our Customer Care
Department.
Warranty
Nasco Healhcare warrants their
products to be free from defects
in materials and/or workmanship
for a period of three years from
the date of purchase, as evidenced
by the date on the invoice of the
product shipment to the end user.
The warranty expressly does not
cover abuse, accidental or purposeful
damage, or any form of modification
to the product.
Nasco Healthcare reserves the right
to either replace affected parts
or the entire unit, at their sole
discretion, after investigating and
reviewing the actual product and
the damage. In most instances,
a digital photo of the product in
question showing the damage will
help qualify a product for return
to the factory. At no time will any
product be accepted at the factory
without proper return authorization
issued by Nasco Healthcare.
Freight and shipping charges are the
sole responsibility of the end user.
No product will be received with
shipping charges due. Any product
considered for warranty work must
be identified by serial number and
invoice number from the agency
through whom the product was
purchased.
Without this information the
product will not receive a return
authorization number as required.
Do not allow print material to
come in contact with the skin of
your product. The ink will embed
in the porous surface and be
impossible to remove. Ink stains
are not covered under warranty.
PP1318/HC190012INS6 05/2022
©2022 Nasco Healthcare