National Instruments NI PXI-2567 Owner's manual

SAFETY, ENVIRONMENTAL, AND REGULATORY INFORMATION
NI PXI-2567
This document includes compliance precautions and connection information for the NI PXI-2567.
Note The guidelines in this document are specific to the NI 2567. The other components in the system might not meet the same ratings. Refer to the
documentation for each component in the system to determine the safety and EMC guidelines for the entire system.
Safety Guidelines
Operate the NI 2567 only as described in the device user documentation.
Caution Do not operate the NI 2567 in a manner not specified in the user documentation. Product misuse can result in a hazard. You can compromise
the safety protection built into the product if the product is damaged in any way. If the product is damaged, return it to NI for repair.
Safety Voltages
Connect only voltages that are within these limits.
Maximum drive voltage 50 VDC
Note Overvoltage protection activates at 80 V maximum.
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications.
These requirements and limits provide reasonable protection against harmful interference when the product is operated in the intended operational
electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may occur in some installations, when the product is connected to a
peripheral device or test object, or if the product is used in residential or commercial areas. To minimize interference with radio and television reception and
prevent unacceptable performance degradation, install and use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National Instruments could void your authority to operate it under your
local regulatory rules.
Caution To ensure the specified EMC performance, operate this product only with shielded cables and accessories.
Caution To ensure the specified EMC performance, the length of all I/O cables must be no longer than 3 m (10 ft).
Preparing the Environment
Ensure that the environment in which you are using the NI 2567 meets the following specifications.
Environment
Operating temperature 0 °C to 55 °C
Storage temperature -20 °C to 70 °C
Operating relative humidity 10% to 90%, noncondensing
Storage relative humidity 5% to 95%, noncondensing
Pollution Degree 2
Maximum altitude 2,000 m
Indoor use only.

Power Requirements
Caution The protection provided by the NI 2567 can be impaired if it is used in a manner not described in the user documentation.
PXI power requirement, including optional internal drive power
5 V 8 W
3.3 V 0.5 W
12 V 6 W
Worldwide Support and Services
NI corporate headquarters is located at 11500 North Mopac Expressway, Austin, Texas, 78759-3504. NI also has offices located around the world. For
telephone support in the United States, create your service request at ni.com/support or dial 1 866 ASK MYNI (275 6964). For telephone support outside the
United States, visit the Worldwide Offices section of ni.com/niglobal to access the branch office websites, which provide up-to-date contact information,
support phone numbers, email addresses, and current events.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are
trademarks or trade names of their respective companies. For patents covering NI products/technology, refer to the appropriate location: Help»Patents in your software, the
patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents. You can find information about end-user license agreements (EULAs) and
third-party legal notices in the readme file for your NI product. Refer to the Export Compliance Information at ni.com/legal/export-compliance for the NI global trade
compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE
ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this
manual was developed at private expense and is subject to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and
DFAR 252.227-7015.
© 2016—2021 National Instruments Corporation. All rights reserved.
378096B-01 January 22, 2021