NEC IE-703002-MC User manual

User’s Manual
Target Devices
V852TM
V853TM
V850/Sxx products
IE-703002-MC
In-Circuit Emulator
1996
Document No. U11595EJ5V0UM00 (5th edition)
Date Published March 2003 N CP(K)
Printed in Japan

User’s Manual U11595EJ5V0UM
2
[MEMO]

User’s Manual U11595EJ5V0UM 3
V850 Series, V852, V853, V850/SA1, V850/SB1, V850/SB2, V850/SC1, V850/SC2, V850/SC3, V850/SF1,
V850/SV1 and EEPROM are trademarks of NEC Electronics Corporation.
Windows is either a trademark or a registered trademark of Microsoft Corporation in the United States and/or
other countries.
PC/AT is a trademark of International Business Machines Corporation.
Ethernet is a trademark of Xerox Corporation.
The information in this document is current as of November, 2002. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics
(as defined above).
•
•
•
•
•
•
M8E 02. 11-1

User’s Manual U11595EJ5V0UM
4
Regional Information
• Device availability
• Ordering information
• Product release schedule
• Availability of related technical literature
• Development environment specifications (for example, specifications for third-party tools and
components, host computers, power plugs, AC supply voltages, and so forth)
• Network requirements
In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary
from country to country.
NEC Electronics America, Inc. (U.S.)
Santa Clara, California
Tel: [phone]
800-366-9782
Fax: [phone]
800-729-9288
NEC Electronics Hong Kong Ltd.
Hong Kong
Tel: [phone]
Fax: [phone]
NEC Electronics Hong Kong Ltd.
Seoul Branch
Seoul, Korea
Tel: [phone]
Fax: [phone]
NEC Electronics Shanghai, Ltd.
Shanghai, P.R. China
Tel: [phone]
Fax: [phone]
NEC Electronics Taiwan Ltd.
Taipei, Taiwan
Tel: [phone]
Fax: [phone]
NEC Electronics Singapore Pte. Ltd.
Novena Square, Singapore
Tel: [phone]
Fax: [phone]
J02.11
NEC Electronics (Europe) GmbH
Duesseldorf, Germany
Tel: [phone]
Fax: [phone]
•Sucursal en España
Madrid, Spain
Tel: [phone]
Fax: [phone]
Vélizy-Villacoublay, France
Tel: [phone]
Fax: [phone]
•Succursale Française
•Filiale Italiana
Milano, Italy
Tel: [phone]
Fax: [phone]
•Branch The Netherlands
Eindhoven, The Netherlands
Tel: [phone]
Fax: [phone]
•Tyskland Filial
Taeby, Sweden
Tel: [phone]
Fax: [phone]
•United Kingdom Branch
Milton Keynes, UK
Tel: [phone]
Fax: [phone]
Some information contained in this document may vary from country to country. Before using any NEC
Electronics product in your application, pIease contact the NEC Electronics office in your country to
obtain a list of authorized representatives and distributors. They will verify:

User’s Manual U11595EJ5V0UM 5
MAJOR REVISIONS IN THIS EDITION
Page Contents
Throughout •Deletion of V851 TM from target devices
•Addition of V853 and V850/Sxx products to target devices
•Change from evaluation chip to emulation CPU
•Deletion of description of PC interface boards IF-70000-98-IF-B and IF-70000-PC-IF-B
•Change of description about how to connect IE-703002-MC to target system; from rear side of pod
to connection tab of option board
•Addition of description about referring to user’s manual of option board
p.14 1.1 Hardware Configuration
•Addition of description of option board to extension probe explanation
•Change of part numbers of some PC interface boards
p.15 1.2 Features
•Addition of description of maskable pins
p.16 Modification of 1.3 Function Specifications
p.17 Addition of option board to Figure 1-1 Basic Hardware Configuration
p.18 Figure 1-2 System Configuration
•Addition of IE-7000-PCI-IF-A and IE-70000-CD-IF-A to Remark <3> PC interface board
•Addition of option board
pp.21, 22 1.7.1 When using IE-703002-MC on stand-alone basis for performing software debugging, 1.7.2
When performing hardware debugging with target system
Addition of section (2)
p.29 Addition of 2.2.3 When IE-703002-MC is used connected to option board
p.37 3.2 Connection to Target System
Change of description of (2) (a) and (b)
Modification of Figure 3-10 Connection to Target System
The mark shows major revised points.

User’s Manual U11595EJ5V0UM
6
INTRODUCTION
Target Readers This manual is intended for users who design and develop application systems using
the V852, V853 or V850/Sxx products.
Purpose To enable efficient debugging with the IE-703002-MC or a combination of the IE-
703002-MC and an option board (IE-7030xx-MC-EM1) when designing and developing
application systems using the V852, V853 or V850/Sxx. This manual describes the
proper operation of the IE-703002-MC and its basic specifications.
Organization This manual is broadly divided into the following parts.
•Overview •Factory settings
•Names and functions of parts •Option board
•Connections of parts •Cautions
How to Use This Manual It is assumed that the readers of this manual have a general knowledge in the fields
of electrical engineering, logic circuits, and microcontrollers.
To learn the basic specifications and operations
→Read this manual in the order of the CONTENTS.
To learn in detail about the connectors for target connection
→Read APPENDIX C CONNECTORS FOR TARGET CONNECTION.
To learn the operation methods, command functions, etc., of the IE-703002-MC
→Read the user’s manual of the debugger that is used (sold separately).
Conventions Note: Footnote for item marked with Note in the text
Caution: Information requiring particular attention
Remark: Supplementary information
Numeric notation: Binary…×××× or ××××B
Decimal…××××
Hexadecimal…××××H
Prefixes indicating power of 2 (address space, memory capacity):
K (kilo): 210 = 1,024
M (mega): 220 = 1,0242
Terminology The meanings of terms used in this manual are listed below.
Target device This is the device to be emulated.
Target system The system (user-built system) to be debugged. This includes the target program and hardware provided
by the user.
Evaluation chip This is the device that performs emulation of the target device in the IE-703002-MC.

User’s Manual U11595EJ5V0UM 7
RELATED DOCUMENTS
The related documents indicated in this publication may include preliminary versions. However, preliminary
versions are not marked as such.
{Documents related to V852, V853, V850/SA1TM, V850/SB1TM, V850/SC1TM, V850/SC2TM, V850/SC3TM,
V850/SF1TM, and V850/SV1TM
Device Document Name Document Number
V850 Family Architecture User’s Manual U10243E
V850 SeriesTM
V850 Series Flash Memory Self Programming User’s Manual U15673E
µ
PD703002 Data Sheet U11826E
µ
PD70P3002 Data Sheet U11827E
V852 Hardware User’s Manual U10038E
V852
V852 Register List U10513E
µ
PD703003A, 703004A, 703025A, 703003A(A), 703025A(A) Data Sheet U13188E
µ
PD70P3002 Data Sheet U13189E
V853
V853 Hardware User’s Manual U10913E
V850/SA1 Application Note U13851EV850/SA1
V850/SA1 Hardware User’s Manual U12768E
µ
PD703031A, 703031AY, 703033AY, 70F3033A, 70F3033AY Data Sheet U14734E
µ
PD703032A, 703032AY, 70F3032A, 70F3032AY Data Sheet U14893E
µ
PD703034A, 703034AY, 703035A, 703035AY, 70F3035A, 70F3035AY Data
Sheet
U14780E
µ
PD703037A, 703037AY, 70F3037A, 70F3037AY Data Sheet U14894E
V850/SB1, SB2
V850/SB1, V850/SB2 Hardware User’s Manual U13850E
V850/SC1,
SC2, SC3
V850/SC1, V850/SC2, V850/SC3 Hardware User’s Manual U15109E
µ
PD703078Y, 703079Y, 70F3079Y Data Sheet U15183EV850/SF1
V850/SF1 Hardware User’s Manual U14665E
µ
PD703039, 703039Y, 703040, 703040Y, 703041 Data Sheet To be prepared
µ
PD70F3040, 70F3040Y Data Sheet To be prepared
V850/SV1
V850/SV1 Hardware User’s Manual U14462E

User’s Manual U11595EJ5V0UM
8
{Documents related to development tools (user’s manual)
Document Name Document Number
IE-703002-MC (In-circuit emulator) This manual
IE-703003-MC-EM1 (In-circuit emulator option board for V853) U11596E
IE-703017-MC-EM1 (In-circuit emulator option board for V850/SA1) U12898E
IE-703037-MC-EM1 (In-circuit emulator option board for V850/SB1, V850/SB2) U14151E
IE-703079-MC-EM1 (In-circuit emulator option board for V850/SF1) U15447E
IE-703040-MC-EM1 (In-circuit emulator option board for V850/SV1) U14337E
Operation U16053E
C Language U16054E
PM plus U16055E
CA850 Ver. 2.50 or later
(C compiler package)
Assembly Language U16042E
ID850 Ver. 2.50 (Integrated debugger) Operation Windows-based U15181E
SM850 Ver. 2.50 (System simulator) Operation Windows-based U15182E
SM850 Ver. 2.00 or later (System simulator) External Part User Open Interface Specifications U14873E
Basics U13430E
Installation U13410E
RX850 Ver. 3.13 or later (Real-time OS)
Technical U13431E
Basics U13773E
Installation U13774E
RX850 Pro Ver. 3.13 (Real-time OS)
Technical U13772E
RD850 Ver. 3.01 (Task debugger) U13737E
RD850 Pro Ver. 3.01 (Task debugger) U13916E
AZ850 Ver. 3.10 (System performance analyzer) U14410E
PG-FP4 (Flash memory programmer) U15260E

User’s Manual U11595EJ5V0UM 9
CONTENTS
CHAPTER 1 OVERVIEW..................................................................................................................13
1.1 Hardware Configuration .......................................................................................................14
1.2 Features .................................................................................................................................15
1.3 Function Specifications........................................................................................................16
1.4 Hardware Configuration .......................................................................................................17
1.5 System Configuration...........................................................................................................18
1.6 Contents in Carton................................................................................................................19
1.7 Setup ......................................................................................................................................21
1.7.1 When using IE-703002-MC on stand-alone basis for performing software debugging.............. 21
1.7.2 When performing hardware debugging with target system........................................................ 22
CHAPTER 2 NAMES AND FUNCTIONS OF PARTS ...................................................................23
2.1 Names and Functions...........................................................................................................24
2.1.1 Names and functions of main unit.............................................................................................. 24
2.1.2 Names and functions of pod part ............................................................................................... 25
2.2 Clock Setting .........................................................................................................................28
2.2.1 When IE-703002-MC is used alone ........................................................................................... 28
2.2.2 When IE-703002-MC is used connected to target system......................................................... 28
2.2.3 When IE-703002-MC is used connected to option board .......................................................... 29
2.3 Setting of Illegal Access Detection ROM ............................................................................29
2.4 Operating Voltage Setting ....................................................................................................30
CHAPTER 3 CONNECTION OF PARTS........................................................................................32
3.1 Connection to Personal Computer......................................................................................32
3.1.1 Overview of connection.............................................................................................................. 32
3.1.2 Connection procedure................................................................................................................ 32
3.1.3 Personal computer setting ......................................................................................................... 35
3.1.4 Connection of PC interface cable............................................................................................... 36
3.2 Connection to Target System ..............................................................................................37
3.3 Cable Connections................................................................................................................39
3.3.1 Connection of power adapter ..................................................................................................... 39
3.3.2 PC interface cable connection ................................................................................................... 39
3.3.3 External logic probe connection................................................................................................. 40
3.3.4 Additional information................................................................................................................. 40
3.4 System Power-on and Power-off .........................................................................................42
3.4.1 Power-on procedure................................................................................................................... 42
3.4.2 Power-off procedure................................................................................................................... 42
CHAPTER 4 FACTORY SETTINGS.................................................................................................43
CHAPTER 5 OPTION BOARD ........................................................................................................44
CHAPTER 6 CAUTIONS ..................................................................................................................45
6.1 LED Display ...........................................................................................................................45
6.2 Operating Voltage .................................................................................................................45

User’s Manual U11595EJ5V0UM
10
6.3 Internal RAM and ROM.........................................................................................................46
6.4 Target System VDD ............................................................................................................... 46
6.5 Pin Handling.......................................................................................................................... 47
6.6 Port 4, Port 5 ......................................................................................................................... 48
6.7 Bus Interface Pins ................................................................................................................ 49
6.8 Operating Frequency of IE-703002-MC .............................................................................. 50
APPENDIX A PACKAGE DRAWINGS............................................................................................ 51
APPENDIX B APPLICATION EXAMPLES OF CONNECTOR FOR TARGET CONNECTION. 57
APPENDIX C CONNECTORS FOR TARGET CONNECTION .................................................... 59
C.1 Use ......................................................................................................................................... 59
C.2 Cautions on Handling Connectors ..................................................................................... 61
APPENDIX D MOUNTING OF PLASTIC SPACERS ........................................................................ 62

User’s Manual U11595EJ5V0UM 11
LIST OF FIGURES
Figure No. Title Page
1-1 Basic Hardware Configuration........................................................................................................................17
1-2 System Configuration .....................................................................................................................................18
1-3 Contents in IE-703002-MC Carton .................................................................................................................19
1-4 Accessories ....................................................................................................................................................20
2-1 IE-703002-MC ................................................................................................................................................23
2-2 Main Unit ........................................................................................................................................................24
2-3 Pod (Top View)...............................................................................................................................................25
2-4 Pod (Bottom View)..........................................................................................................................................27
3-1 Setting of DIP Switch 1 (SW1) (IE-70000-98-IF-C) ........................................................................................33
3-2 Setting of DIP Switch 2 (SW2) (IE-70000-98-IF-C) ........................................................................................33
3-3 Setting of DIP Switch 1 (SW1) (IE-70000-PC-IF-C) .......................................................................................34
3-4 Setting of DIP Switch 2 (SW2) (IE-70000-PC-IF-C) .......................................................................................34
3-5 Rear Panel of PC-9800 Series .......................................................................................................................35
3-6 Insertion of PC Interface Board ......................................................................................................................35
3-7 Connection of Cable to PC Interface Board ...................................................................................................36
3-8 Connection of Connector for Target Connection and Connector for Emulator Connection............................37
3-9 Pin 1 Direction Marking of Connector (Top View) ..........................................................................................37
3-10 Connection of IE-703002-MC to Target System.............................................................................................38
3-11 Power Adapter Connection.............................................................................................................................39
3-12 PC Interface Cable Connection ......................................................................................................................39
3-13 External Logic Probe Connection...................................................................................................................40
3-14 External Logic Probe Connection (Using IC Clip)...........................................................................................41
5-1 Option Board PGA Socket Lever....................................................................................................................44
6-1 Circuit Diagram of PLLSEL Pin and CKSEL Pin.............................................................................................47
6-2 Circuit Diagram of Port 4, Port 5.....................................................................................................................48
C-1 Mounting of NQPACK100SD..........................................................................................................................59
C-2 Mouting Device...............................................................................................................................................60
C-3 NQPACK100SD and Device Pin ....................................................................................................................60
D-1 Mounting Method (When Using IE-703002-MC Alone) ..................................................................................62
D-2 Mounting Method (When Using IE-703002-MC + Option Board) ...................................................................63
D-3 Mounting Method (When Mounting Plastic Spacer on Option Board) ............................................................63

User’s Manual U11595EJ5V0UM
12
LIST OF TABLES
Table No. Title Page
6-1 Differences Between Target System Supply Voltage and IE-703002-MC Operating Voltage........................45
6-2 Memory Capacity Limitation List.....................................................................................................................46
6-3 Bus Interface Pin Operation List.....................................................................................................................49
6-4 List of Oscillator Frequencies for Clock Modes ..............................................................................................50

User’s Manual U11595EJ5V0UM 13
CHAPTER 1 OVERVIEW
The IE-703002-MC is an in-circuit emulator that efficiently debugs hardware and software of systems being
developed using V852, V853 and V850/Sxx products.
It incorporates functions such as a break/trace function using events, a coverage function for program
performance evaluation, and a timer/counter function.
The IE-703002-MC can also be used as an in-circuit emulator for developing systems that use V853 and
V850/Sxx products (but not the V852) by connecting an option board.

CHAPTER 1 OVERVIEW
User’s Manual U11595EJ5V0UM
14
1.1 Hardware Configuration
Notes 1. For further information, contact Daimaru Kogyo., Ltd.
Tokyo Electronic Division (TEL [phone])
Osaka Electronic Division (TEL [phone])
2. These interface boards cannot be used for the PC98-NX series.
Option board
(IE-7030xx-MC-EM1)
The IE-703002-MC can be used as an in-circuit
emulator of V853 and V850/Sxx products (not
V852) by connecting this board.
Extension probe (SC-×××SDANote 1) General-purpose extension probe. Product of
TOKYO ELETECH CORPORATION.
This varies depending on the option board to be
used.
PC interface board
IE-70000-××-IF-C
IE-70000-PCI-IF-A
IE-70000-CD-IF-A
These boards are used to connect the IE-703002-
MC to a personal computer. These boards are
added into the expansion slot of a personal
computer.
××: 98 (for PC-9800 series C bus)Note 2
PC (for IBM PC/ATTM compatible ISA bus)Note 2
IE-70000-PCI-IF-A: For PCI bus
IE-70000-CD-IF-A: For PCMCIA socket
Network module
(IE-70000-MC-SV3)
This module is used when a workstation controls the
IE-703002-MC via EthernetTM.
Power adapter
(IE-70000-MC-PS-B)
An AC adapter dedicated to the NEC Electronics in-
circuit emulator.
In-circuit emulator (IE-703002-MC)
Separately sold hardware

CHAPTER 1 OVERVIEW
User’s Manual U11595EJ5V0UM 15
1.2 Features
{Maximum operating frequency: 33 MHz (at 3.0 to 5.5 V operation)
{Higher equivalence with target device can be achieved by omitting buffer between signal cables.
{Following pins can be masked.
RESET, NMI, WAIT, HLDRQ
Maskable pins vary depending on the option board to be used.
{Two methods of connection to target system.
• Directly connect to the connection tab of the option board.
• Attach an extension probe (sold separately) to the connection tab of the option board for connection.
{Dimensions and environmental conditions for operation are as follows.
Parameter Value
Maximum operating frequency 33 MHz
Supply voltage (DC) 5 V
Operating voltage (DC) 3.0 to 5.5 V
Power dissipation 10 W (Operating frequency: 33 MHz)Note
Height 56 mm
Length 403 mm
Outer dimensions
(Refer to Appendix A Package
Drawings)
Width 90 mm
Weight 475 g
Operating temperature range 0 to 40°C
Storage temperature range 0 to 45°C
Ambient humidity range 10 to 80%RH
Note To enable operation under the maximum operating frequency of 33 MHz, a factory-set 6.667 MHz crystal
oscillator is included in the IE-703002-MC. If this emulator is used connected to the option board, refer to
the user’s manual of the option board used.

CHAPTER 1 OVERVIEW
User’s Manual U11595EJ5V0UM
16
1.3 Function Specifications
Item Specification
Internal ROM 1 MB
In ROMless mode 2 MB
Emulation memory capacity
External Memory
When using iROM 1 MB
Internal ROM 1 MB
In ROMless mode 2 MB
Execution/pass detection coverage
memory capacity External memory
When using iROM 1 MB
Memory access detection coverage
memory capacity
External memory 1 MB
Internal ROM 1 MB
In ROMless Mode 2 MB
Branch destination entry number counting
coverage memory capacity External Memory
When using iROM 1 MB
Trace memory capacity 150 bits ×32 Kframes
Time measurement function Measurement enabled with time tag or
three timers
4-bit external trace possibleExternal logic probe
Trace/break event setting possible
Event break
Step execution break
Forced break
Break function
Fail-safe break
• Illegal access to peripheral I/O
• Access to guard space
• Write to ROM space
Caution Some of the functions may not be supported depending on the debugger used.

CHAPTER 1 OVERVIEW
User’s Manual U11595EJ5V0UM 17
1.4 Hardware Configuration
The basic hardware configuration of the IE-703002 is as follows.
Figure 1-1. Basic Hardware Configuration
IE-703002-MC
Main unit Pod part
Emulation CPU
MM1
iROM Memory board
C0 Coverage board
Access coverage board
Illegal access detection
MM2
MM3
Illegal access
detection ROM
OSC
Extension
probe
PC data bus
Trace memory
Emulation memory
Host
machine
Option
board
Target
system

CHAPTER 1 OVERVIEW
User’s Manual U11595EJ5V0UM
18
1.5 System Configuration
The system configuration when connecting the IE-703002-MC to a personal computer is illustrated below (PC-
9800 Series or PC/ATTM (or compatible machines)).
Figure 1-2. System Configuration
For PC/AT
[Magnified drawing: example of use of
connector for target connection]
Target
system
<12>
<13>
<11>
<5> <6>
<7>
<4>
<3>
<1>
<2>
<8>
<10>
<9>
Target system
<9>
<10>
<14>
Remark
<1> Personal computer (PC-9800 Series or PC/AT)
<2> Debugger (sold separately)
<3>PC interface board (IE-70000-98-IF-C, IE-70000-PC-IF-C, IE-70000-PCI-IF-A, IE-70000-CD-IF-A: Sold
separately)
<4> PC Interface cable (included)
<5> IE-703002-MC (In-circuit emulator)
<6> External logic probe (included)
<7> Socket for target connection
<8> Extension probe (SC-100SD: Sold separately)Note
<9> Connector for emulator connection (YQPACK100SD: Included)
<10> Connector for target connection (NQPACK100SD: Included)
<11> Power adapter (IE-70000-MC-PS-B: Sold separately)
<12> 100-VAC power cable (sold separately: Included with IE-70000-MC-PS-B)
<13> 220-VAC power cable (sold separately: Included with IE-70000-MC-PS-B)
<14> Option board (sold separately)
Note Product of TOKYO ELETECH CORPORATION.

CHAPTER 1 OVERVIEW
User’s Manual U11595EJ5V0UM 19
1.6 Contents in Carton
The carton of the IE-703002-MC contains the main unit, guarantee card, packing list, and accessory bag.
Make sure that the accessory bag includes this manual and cables. In the case of missing or damaged contents,
please contact an NEC Electronics sales representative or distributor.
Figure 1-3. Contents in IE-703002-MC Carton
<2> Accessory bag
<3> Guarantee card
<4> Packing list
<1> IE-703002-MC
<1> IE-703002-MC ×1 pc.
<2> Accessory bag ×1 pc.
<3> Guarantee card ×1 pc.
<4> Packing list ×1 sheet

CHAPTER 1 OVERVIEW
User’s Manual U11595EJ5V0UM
20
Check that the accessory bag contains this manual, an accessory list, and the following accessories.
(a) PC interface cable ×1
(b) External logic probe ×1
(c) Connector for target connection (NQPACK100SD) ×1 set (including NQGUIDE ×3, screw driver ×1)
(d) Connector for emulator connection (YQPACK100SD) ×1 set (including YQGUIDE ×4)
(e) Cover for device mounting (HQPACK100SD) ×1 set (including fixing screws ×4)
(f) Socket for target connection (YQSOCKET100SDN) ×1
(g) Plastic spacer ×2 sets (including plastic screw ×2)
Figure 1-4. Accessories
(c) Connector for target connection(a) PC interface cable
(d) Connector for emulator connection
(b) External logic probe
NQPACK100SD
(Side view)
YQPACK100SD
(Side view)
YQGUIDE (Fixing screws)
(e) Cover for device mounting
HQPACK100SD
(Side view)
(f) Socket for target connection (g) Plastic spacers
YQSOCKET100SDN
(Side view)
Fixing screws
Screw driver
NQGUIDE
(Guide pins)