4
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
Purchase of NEC I2C components conveys a license under the Philips I2C Patent Rights to use these
components in an I2C system, provided that the system conforms to the I2C Standard Specification as
defined by Philips.
License not needed:
µ
PD78P078KL-T, 78P078YKL-T
The customer must judge the need for license:
µ
PD78076GC-xxx-7EA, 78076GC-xxx-8EU, 78076GF-xxx-3BA,
µ
PD78076YGF-xxx-3BA
µ
PD78078GC-xxx-7EA, 78078GC-xxx-8EU, 78078GF-xxx-3BA,
µ
PD78078YGF-xxx-3BA
µ
PD78P078GC-7EA, 78P078GC-8EU, 78P078GF-3BA, 78P078YGF-3BA
The export of these products from Japan is regulated by the Japanese government. The export of some or all of
theseproductsmaybeprohibited without governmental license. Toexportorre-exportsomeor all of theseproducts
from a country other than Japan may also be prohibited without a license from that country. Please call an NEC
sales representative.
The information in this document is subject to change without notice.
Nopartofthisdocumentmaybecopiedorreproducedinanyformorbyanymeanswithoutthepriorwrittenconsent
of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this
document.
NECCorporationdoesnotassume any liability for infringement of patents, copyrights or otherintellectualproperty
rights of third parties by or arising from use of a device described herein or any other liability arising from use of
such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other
intellectual property rights of NEC Corporation or others.
While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,
thepossibilityofdefectscannotbeeliminatedentirely. Tominimizerisksofdamageorinjurytopersonsorproperty
arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in
its design, such as redundancy, fire-containment, and anti-failure features.
NEC devices are classified into the following three quality grades:
“Standard”, “Special”, and “Specific”. The Specific quality grade applies only to devices developed based on a
customer designated “quality assurance program” for a specific application. The recommended applications of
a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device
before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems,anti-crimesystems,safety equipmentandmedicalequipment(not specificallydesignedfor
life support)
Specific: Aircrafts,aerospaceequipment,submersiblerepeaters,nuclearreactorcontrolsystems,lifesupport
systems or medical equipment for life support, etc.
The quality grade of NEC devices is “Standard” unless otherwise specified in NEC’s Data Sheets or Data Books.
Ifcustomers intend to use NEC devicesfor applications other than those specifiedfor Standard quality grade, they
should contact an NEC sales representative in advance.
Anti-radioactive design is not implemented in this product.
M7 96.5
