NEC Express 5800 Series User manual

NEC Express Server
Express5800 Series
Express5800/R320d-E4
Model Number: N8800-184F, EXP320P
Installation Guide (VMware 5.5)
30.104.03-103.02
December 2014
© NEC Corporation 2014
Express5800/R320d-M4
Model Number: N8800-185F, EXP320Q
Chapter 1 Installing OS
Chapter 2 Installing Bundled Software
Chapter 3 Configuring the Separate Log Server

Documents for This Product
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
2
Documents for This Product
Documents for this product are provided as accompanying booklets ( ) and as electronic manuals (
PDF
) stored
within EXPRESSBUILDER DVD ( ).
User’s Guide
Chapter 1: General Description Overviews, names, and functions of the server’s parts
Chapter 2: Preparations Installation of additional
options, connection of peripheral devices, and
ideal location for this server
Chapter 3: Setup System BIOS configurations and summary of EXPRESSBUILDER
Chapter 4: Appendix Specifications and other information
Installation Guide
Chapter 1: Installing OS Installation of OS and drivers, and important information for installation
Chapter 2: Installing Bundled
Software
Installation of bundled software, such as NEC ESMPRO
Chapter 3: Configuring the
Separate Log Server Configure the log server using other than ftSys Management Appliance
Maintenance Guide
Chapter 1: Maintenance Server maintenance and troubleshooting
Chapter 2 Configuring and
Upgrading the System Configure hardware and setup management tool associated with hardware
Chapter 3: Useful Features Useful features and the detail of system BIOS settings, SAS
Configuration Utility, and EXPRESSBUILDER
PDF
Other documents
Provides the detail of NEC ESMPRO and the other features.

Contents
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
3
Contents
Documents for This Product............................................................................................................................ 2
Contents........................................................................................................................................................ 3
Notations Used in This Document ................................................................................................................... 5
Notations used in the text ....................................................................................................................... 5
Optical disk drives.................................................................................................................................. 5
Hard disk drives ..................................................................................................................................... 5
Removable media .................................................................................................................................. 5
POST ................................................................................................................................................... 5
BMC ................................................................................................................................................... 5
Trademarks.................................................................................................................................................... 6
Regulatory Notices......................................................................................................................................... 7
Warnings andAdditions to This Document......................................................................................................11
Latest editions.......................................................................................................................................11
Chapter 1 Installing OS...............................................................................................................................12
1. Setup Procedure.......................................................................................................................................13
1.1 Requirements for Setup..................................................................................................................14
1.2 Preparations for Setup....................................................................................................................15
1.2.1 Prepare NEC Express5800/ft series....................................................................................15
1.2.2 Prepare external storage device..........................................................................................17
1.3 Enabling internal disk......................................................................................................................18
1.4 Enabling FC card............................................................................................................................21
1.5 Disabling OS Boot Monitoring Function...........................................................................................25
1.6 Setting HBAconfiguration by using QLogic......................................................................................27
1.7 Installing VMware ESXi...................................................................................................................35
1.7.1 Installing VMware ESXi.......................................................................................................35
1.7.2 Configuring ESXi................................................................................................................38
1.7.3 Configuring the Firewall for the ESXi Host from the vSphere Client ......................................41
1.8 Installing ftSys Management Appliance............................................................................................42
1.8.1 Checking the Installation Destination Disk...........................................................................42
1.8.2 Installing ftSys Management Appliance ...............................................................................44
1.9 Installing ft control software.............................................................................................................49
1.10 Applying Patch Program...............................................................................................................53
1.11 Setup after installing ft control software.........................................................................................54
1.11.1 Log Server........................................................................................................................54
1.11.2 Installing Additional Packages...........................................................................................56
1.11.3 Checking status of ft server...............................................................................................57
1.12 Connecting and Configuring Options.............................................................................................58
1.13 Enabling OS Boot Monitoring Function..........................................................................................59
1.14 Backing up System Information ....................................................................................................60
1.14.1 BIOS SETUP....................................................................................................................60
1.14.2 System information...........................................................................................................61
1.14.3 BMC Configuration ...........................................................................................................61
1.15 Setup Procedures upon Installing Guest OS..................................................................................62

Contents
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
4
2. Procedures after Completion of Installation................................................................................................63
2.1 Confirmation of the Kernel Version..................................................................................................63
2.2 Confirmation of the ft control software Version.................................................................................64
2.3 Precautions for Changing the Configuration after Setup...................................................................65
2.3.1 If the ESXi Host IP address or root user password has been changed..................................65
2.3.2 If the IP address of Log Server or Host Name has been Changed........................................65
2.3.3 Changing the Firewall Rules on ftSys Management Appliance .............................................66
Chapter 2 Installing Bundled Software.........................................................................................................68
1. Bundled Software for the Server................................................................................................................69
1.1 NEC ESMPRO Agent .....................................................................................................................69
1.1.1 Preinclination .....................................................................................................................70
1.1.2 Install NEC ESMPRO Agent................................................................................................71
2. Bundled Software for Management PC......................................................................................................73
2.1 NEC ESMPRO Manager.................................................................................................................73
Chapter 3 Configuring the Separate Log Server...........................................................................................74
1. Steps for Configuring the Separate Log Server...........................................................................................75
1.1 Setting Firewall for Log Server........................................................................................................75
1.2 Setting Syslog for Log Server..........................................................................................................76
1.3 Installing Reporting Function onto Log Server..................................................................................77

Notations Used in This Document
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
5
Notations Used in This Document
Notations used in the text
In addition to safety-related symbols urging caution, 3 other types of notations are used in this document. These
notations have the following meanings.
Important Indicates critical items that must be followed when handling the hardware
or operating
software. If the procedures described are not followed, hardware
failure, data loss, and
other serious malfunctions could occur.
Note Indicates items that must be confirmed when handling the hardware or operating software.
Tips
Indicates information that is helpful to keep in mind when using this server.
Optical disk drives
This server is equipped with one of the following drives, depending on the order at the time of purchase. These
drives are referred to as optical disk drives in this document.
•DVD-ROM drive
•DVD Super MULTI drive
Hard disk drives
Unless otherwise stated, hard disk drive (HDD) described in this document refers to the following.
•Hard disk drives (HDD)
Removable media
Unless otherwise stated, removable media described in this document refers to both of the following.
•USB flash drive
•Flash FDD
POST
POST described in this document refers to the following.
•Power On Self-Test
BMC
BMC described in this document refers to the following.
•Baseboard Management Controller

Trademarks
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
6
Trademarks
EXPRESSSCOPE is a registered trademark of NEC Corporation.
Microsoft, Windows, Windows Server, and MS-DOS are registered trademarks or trademarks of Microsoft Corporation in the United
States and other countries. Intel, Pentium, and Xeon are registered trademarks of Intel Corporation of the United States. AT is a
registered trademark of International Business Machines Corporation of the United States and other countries. Adaptec, its logo, and
SCSI Select are registered trademarks or trademarks of Adaptec, Inc. of the United States. LSI and the LSI logo design are
trademarks or registered trademarks of LSI Corporation. Adobe, the Adobe logo, and Acrobat are trademarks of Adobe Systems
Incorporated. DLT and DLTtape are trademarks of Quantum Corporation of the United States. PCI Express is a trademark of
Peripheral Component Interconnect Special Interest Group.
Copyright © 2010 VMware, Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual
property laws. VMware products are covered by one or more patents listed at http://www.vmware.com/go/patents.
VMware is a registered trademark or trademark of VMware, Inc in the United States and/or other
jurisdictions. All other marks and names mentioned herein may be trademarks of their respective
companies.
All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of their respective
trademark owners.

Regulatory Notices
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
7
Regulatory Notices
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
Industry Canada Class A Emission Compliance Statement/
Avis de conformité à la réglementation d'Industrie Canada:
CAN ICES-3(A)/NMB-3(A)
CE / Australia and New Zealand Statement
This is a Class A product. In domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures (EN55022).
BSMI Statement
Korean KC Standards
Registration NO. : KCC-REM-NEC-EXP320Q
Basic Model Number : EXP320Q
Trade Name or Registrant : NEC CORPORATION :
Equipment Name : FT Server
Manufacturer : NEC CORPORATION
Turkish RoHS information relevant for Turkish market
EEE Yönetmeliğine Uygundur.

Regulatory Notices
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
8
Japan
<
本装置の利用目的について
>
本製品は、高速処理が可能であるため、高性能コンピュータの平和的利用に関する日本政
府の指導対象になっております。
ご使用に際しましては、下記の点につきご注意いただけますよう、よろしくお願いいたし
ます。
本製品は不法侵入、盗難等の危険がない場所に設置してください。
パスワード等により適切なアクセス管理をお願いいたします。
大量破壊兵器およびミサイルの開発、ならびに製造等に関わる不正なアクセスが行われる
おそれがある場合には、事前に弊社相談窓口までご連絡ください。
不正使用が発覚した場合には、速やかに弊社相談窓口までご連絡ください。
弊社相談窓口 ファーストコンタクトセンター
電話番号 03-3455-5800
注意
この装置は、クラスＡ情報技術装置です。この装置を家庭環境で使用すると電波妨害を引
き起こすことがあります。この場合には使用者が適切な対策を講ずるよう要求されること
があります。
VCCI-A
高調波適合品
この装置は、高調波電流規格 JIS C 61000-3-2 適合品です。
：JIS C 61000-3-2 適合品とは、日本工業規格「電磁両立性－第 3-2部：限度値－高調波電流発生限度値（1相
当たりの入力電流が 20A以下の機器）」に基づき、商用電力系統の高調波環境目標レベルに適合して設計・製
造した製品です。
回線への接続について
本体を公衆回線や専用線に接続する場合は、本体に直接接続せず、技術基準に適合し認定されたボードまたは
モデム等の通信端末機器を介して使用してください。
電源の瞬時電圧低下対策について
この装置は、落雷等による電源の瞬時電圧低下に対し不都合が生じることがあります。電源の瞬時電圧低下対
策としては、交流無停電電源装置（UPS）等を使用されることをお勧めします。
レーザ安全基準について
この装置にオプションで搭載される光学ドライブは、レーザに関する安全基準（JIS C-6802、IEC 60825-1）ク
ラス 1に適合しています。
Vietnum
Complying with “CIRCULAR, No.30/2011/TT-BCT (Hanoi, August 10 2011), Temporary
regulations on content limit for certain hazardous substances in electrical products”

Regulatory Notices
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
9
the Ukraine
English
Declaration of Conformity
with the requirements of Technical Regulation on the Restriction Of the use of certain
Hazardous Substances in Electrical and Electronic Equipment
(adopted by Order №1057 of Cabinet of Ministers of Ukraine)
The Product is in conformity with the requirements of Technical Regulation on the
Restriction Of the use of certain Hazardous Substances in electrical and electronic
equipment (TR on RoHS).
The content of hazardous substance with the exemption
of the applications listed in the Annex №2 of TR on RoHS:
1. Lead (Pb) – not over 0,1wt % or 1000wt ppm;
2. Cadmium (Cd) – not over 0,01wt % or 100wt ppm;
3. Mercury (Hg) – not over 0,1wt % or 1000wt ppm;
4. Hexavalent chromium (Cr6+) – not over 0,1wt % or 1000wt ppm;
5. Polybrominated biphenyls (PBBs) – not over 0,1wt % or 1000wt ppm;
6. Polybrominated diphenyl ethers (PBDEs) – not over 0,1wt % or 1000wt ppm.
Ukrainian
Декларація про Відповідність
Вимогам Технічного Регламенту Обмеження Використання деяких
Небезпечних Речовин в електричному та електронному обладнанні
(затвердженого Постановою №1057 Кабінету Міністрів України)
Виріб відповідає вимогам Технічного Регламенту Обмеження Використання
деяких Небезпечних Речовин в електричному та електронному обладнанні (ТР
ОВНР).
Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР
ОВНР, :
1. свинець(Pb) – не перевищує 0,1 % ваги речовини або в концентрації до
1000 частин на мільйон;
2. кадмій (Cd)– не перевищує 0,01 % ваги речовини або в концентрації до
100 частин на мільйон;
3. ртуть(Hg) – не перевищує 0,1 % ваги речовини або в концентрації до
1000 частин на мільйон;
4. шестивалентний хром (Cr6+ ) – не перевищує 0,1 % ваги речовини або в
концентрації до 1000 частин на мільйон;
5. полібромбіфеноли (PBB) – не перевищує 0,1% ваги речовини або в
концентрації до 1000 частин на мільйон;
6. полібромдефенілові ефіри (PBDE) – не перевищує 0,1 % ваги речовини
або в концентрації до 1000 частин на мільйон.

Regulatory Notices
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
10
Russian
Декларация о Соответствии
Требованиям Технического Регламента об Ограничении Использования
некоторых Вредных Веществ в электрическом и электронном оборудовании
(утверждённого Постановлением №1057 Кабинета Министров Украины)
Изделие соответствует требованиям Технического Регламента об Ограничении
Использования некоторых Вредных Веществ в электрическом и электронном
оборудовании (ТР ОИВВ).
Содержание вредных веществ в случаях, не предусмотренных Дополнением
№2 ТР ОИВВ:
1. свинец (Pb) – не превышает 0,1 % веса вещества или в концентрации
до 1000 миллионных частей;
2. кадмий (Cd) – не превышает 0,01 % веса вещества или в концентрации
до 100 миллионных частей;
3. ртуть (Hg) – не превышает 0,1 % веса вещества или в концентрации до
1000 миллионных частей;
4. шестивалентный хром (Cr6+)– не превышает 0,1 % веса вещества или в
концентрации до 1000 миллионных частей;
5. полибромбифенолы (PBB) – не превышает 0,1 % веса вещества или в
концентрации до 1000 миллионных частей;
6. полибромдифеноловые эфиры (PBDE) – не превышает 0,1 % веса
вещества или в концентрации до 1000 миллионных частей.
Disposing of your used product
In the European Union
EU-wide legislation as implemented in each Member State requires that used electrical and
electronic products carrying the mark (left) must be disposed of separately from normal
household waste. This includes Information and Communication Technology (ICT) equipment
or electrical accessories, such as cables or DVDs.
When disposing of used products, you should comply with applicable legislation or agreements
you may have. The mark on the electrical and electronic products only applies to the current
European Union Member States.
Outside the European Union
If you wish to dispose of used electrical and electronic products outside the European Union,
please contact your local authority and ask for the correct method of disposal.
India This product is RoHS compliant.

Warnings and Additions to This Document
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
11
Warnings and Additions to This Document
1. Unauthorized reproduction of the contents of this document, in part or in its entirety, is
prohibited.
2. The contents of this document may change without prior notice.
3. Do not make copies or alter the document content without permission from NEC Corporation.
4. Every effort has been made to ensure the completeness of this document. However, if you
have any concerns, or discover errors or omissions, please contact your retailer.
5. Regardless of these 4 items, NEC Corporation does not take responsibility for effects resulting
from operations.
6. The sample values used in this document are not the actual values.
Keep this document nearby so that you may refer to it as necessary.
Latest editions
This document was created based on the information available at the time of its creation. The screen images,
messages and procedures may differ from the actual screens, messages and procedures. Substitute as
appropriate when content has been modified.
The most recent version of User’s Guide, as well as other related documents, is also available for download
from the following website.
http://www.nec.com/

Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
12
NEC Express5800 Series
Express5800/R320d-E4, R320d-M4
Installing OS
This chapter describes how to install OS. Read through this chapter to set up the system correctly.
1. Setup Procedure
Describes how to set up VMware.
2. Procedures after Completion of Installation
Describes how to confirm kernel version and ft control software version, and precautions when changing
configuration after setup.
1
1

1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
13
Chapter 1 Installing OS
1.
Setup Procedure
The flow-chart below illustrates the flow of the setup procedures for the server.
1.14 Backing up System Information
1.13 Enabling OS Boot Monitoring Function
1.12 Connecting and Configuring Options
1.1 Requirements for Setup
1.2 Preparations for Setup
Use Internal Disk
or
Use External Storage
1.3 Enabling internal disk 1.4 Enabling FC card
1.5 Disabling OS Boot Monitoring Function
1.7 Installing VMware ESXi
1.8 Installing ftSys Management Appliance
1.9 Installing ft control software
1.11 Setup after installing ft control software
Use External Storage
Use Internal Disk
1.6 Setting HBAconfiguration by using QLogic
1.10 Applying Patch Program
1.15 Setup Procedures upon Installing Guest OS
Setup completed

1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
14
Chapter 1 Installing OS
1.1 Requirements for Setup
The followings are required.
Components provided with the device:
ft control software 5.1.1 for VMware vSphere 5.5 Update1 Install DVD
User’s Guide
Installation Guide (this manual)
Maintenance Guide
VMware ESXi 5.5 Update1 Install DVD:
Visit the VMware's web site shown below, and download the install image for VMware ESXi 5.5 Update1
(VMware's original).
https://my.vmware.com/web/vmware/details?downloadGroup=ESXI55U1&productId
=353&rPId=5823
* The contents of this web site is subject to change or delete without notice.
ESXi 5.5 Update 1 ISO image (Includes VMware Tools)
VMware-VMvisor-Installer-5.5.0.update01-1623387.x86_64.iso
Important ft control software 5.1.1 is applicable to VMware ESXi 5.5 Update1 only. Do not
install any other version of ESXi.
VMware vSphere Client:
This component is required to configure the VMware ESXi installed on ft server.
VMware ESXi 5.5, Patch Release ESXi550-201404001 (2076120)
Visit the VMware's web site shown below, and download the patch program ESXi550-201404001 for
ESXi 5.5 Update1.
– ESXi550-201404001.zip
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=
displayKC&externalId=2076120
* The contents of this web site is subject to change or delete without notice.

1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
15
Chapter 1 Installing OS
1.2 Preparations for Setup
Before SETUP, be sure to do the following.
IF YOU DO NOT PREPARE, SETUP CANNOT BE PERFORMED PROPERLY.
1.2.1 Prepare NEC Express5800/ft series
The components shown below are required for setup.
AC inlet
connector A
REAR
AC inlet
connector B
CPU/IO module 0
System POWER LED
POWER switch
CPU/IO module 1
DISK ACCESS LED
DUMP (NMI)
switch
FRONT
PRIMARY LED
To install ESXi on internal disk,
only one hard disk drive should
be installed in this slot.
Module POWER LED

1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
16
Chapter 1 Installing OS
With the power of the server off, follow the steps below:
Note Make sure that the System POWER LED on the front panel is unlit.
1. Prepare NEC Express5800/ft series.
Follow the instructions below to prepare.
<When installing or reinstalling ESXi to the internal disk>
– Disconnect all power cords from outlet.
– Install only one hard disk drive in slot 0 of CPU/IO module 0.
Do not install any hard disk drive in CPU/IO module 1.
– Remove all the optional PCI boards.
– Remove all the LAN cables.
Important •Installation must be performed on the device that is actually used. Do not use
any hard disk drive of which system is installed on other device.
•Install only one hard disk drive in the slot specified here. If two or more hard disk
drives are installed, the destination disk to install an OS cannot be identified.
•If the hard disk drive is not a new one, physically format it. Refer to Chapter 3 (3.
SAS Configuration Utility)in Maintenance Guide for physical formatting.
<When installing or reinstalling ESXi to the external storage>
– Disconnect all power cords from outlet.
– Remove all the internal hard disk drives.
– If the FC card is not mounted, insert the FC cards into the same slot of each CPU/IO module.
– Connect each FC card and external storage with FC cables.
– Remove all the optional PCI boards except FC card and peripheral equipments except external
storage.
– Remove all the LAN cables.
2. Connect power cords in the following order to start the system from CPU/IO module 0.
(1) Connect a power cord to AC inlet connector A.
(2) Connect a power cord to AC inlet connector B.
Important Make sure that the PRIMARY LED on CPU/IO module 0 is lit.
Note If you disconnect a power cord, wait for at least 30 seconds before connecting it again.
Note If you disconnect power cord (AC cable) and connect it again, wait for at least 30 seconds
before pressing the POWER switch (DC) to power on. Make sure that Module POWER
LEDs on both CPU/IO modules 0 and 1 are blinking, then press the POWER switch.

1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
17
Chapter 1 Installing OS
1.2.2 Prepare external storage device
Note the following when installing ESXi on the external storage device.
Disk size required for installation
Secure at least 25 GB area in boot LUN to install the ESXi host and the ft control system.

1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
18
Chapter 1 Installing OS
1.3 Enabling internal disk
The following procedure shows when installing or reinstalling ESXi to the internal disk.
Go to “1.4 Enabling FC card”when installing or reinstalling ESXi to the external storage.
1. Turn on the display and the peripheral equipment connected to the server.
Note If the power cords are connected to a power controller like a UPS, make sure that it is
powered on.
2. Detach the front bezel.
3. Press the POWER switch that is located on the front side of the server.
Lift the acrylic cover, and press the POWER switch.
Important Do not turn off the power before the “NEC”
logo appears.
After a while, the "NEC" logo will appear on the screen.
Tips While the "NEC" logo is displayed on the screen, the server performs a power-on self test
(POST) to check itself. For details, refer to Chapter 3 (1.1 POST Check) in User’s Guide.
Note If the server detects
errors during POST, it will interrupt POST and display the error
message. Refer to Chapter 1 (6.2 POST Error Message) in Maintenance Guide.
POWER switch
Acrylic cover

1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
19
Chapter 1 Installing OS
4. Run POST.
After a while, the following message appears at lower left of the screen.
Press <F2> SETUP, <F4> ROM Utility, <F12> Network
If you press F2, SETUP will start after POST, and the Main menu appears. (You can also start SETUP
by pressing F2 while expanding option ROM.)
< Example >
Tips For [System Time], use Coordinated Universal Time
(UTC). The specified UTC time is
applied to the ESXi host to be installed later. In ftSys Management Appliance or other
guest OS, set the time zone for each system.
5. When you move the cursor onto "Advanced", the Advanced menu appears.
Choose "PCI Configuration" and press Enter.

1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
20
Chapter 1 Installing OS
6. Move the cursor onto “SAS Option ROM Scan” and press Enter.
Parameters will be displayed.
< Example >
7. Among the parameters, choose “Enabled” and press Enter.
The current display of the configuration for SAS Option ROM Scan will be changed to “Enabled”.
8. Select an item other than SAS Option ROM Scan, and press Enter. Select Disabled from the
parameters displayed, and press Enter. Repeat these steps for all items other than SAS Option ROM
Scan.
9. Make sure that SAS Option ROM Scan shows Enabled, and all other items show Disabled.
<Example>
This is the end of steps for enabling internal disk.
Now the internal disks are enabled. Then, disable OS boot monitoring feature.
Go to "1.5 Disabling OS Boot Monitoring Function"and continue setup.