NEC Express5800/T110j-S User manual

NEC Express5800/T110j-S
System Configuration Guide
Introduction
This document contains product and configuration information that will enable you to configure your system. The guide will
ensure fast and proper configuration of your NEC Express5800 server.
December 28, 2018
Revision 1.0
NEC Corporation

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 2
Contents
TECHNICAL SPECIFICATION ........................................................................................3
Specification..........................................................................................................................................3
EXTERNAL VIEWS .........................................................................................................6
Front View..............................................................................................................................................6
Rear Views .............................................................................................................................................7
Dimensions (mm) ..................................................................................................................................8
CONFIGURATION DIAGRAM .......................................................................................12
Expansion Slots ..................................................................................................................................13
SERVER CONFIGURATION .........................................................................................14
1Base Models .................................................................................................................................14
2Processor .....................................................................................................................................14
3Memory .........................................................................................................................................14
4Internal Hard Disk Drives ............................................................................................................16
4.1 Drive Cage...........................................................................................................................17
4.2 M.2 SATA SSD Installation Kit .............................................................................................17
4.3 RAID Configuration..............................................................................................................18
4.4 Internal Drives .....................................................................................................................19
5Internal Optical Drive...................................................................................................................21
6Flash FDD .....................................................................................................................................21
7Internal RDX Drives .....................................................................................................................22
7.1 RDX Drive............................................................................................................................22
7.2 RDX Data Cartridge.............................................................................................................22
8PCI Card........................................................................................................................................23
8.1 Network Interface Controller................................................................................................23
8.2 SAS Controller .....................................................................................................................24
8.3 Serial Port Adapter ..............................................................................................................24
8.4 NeoFace Accelarator ...........................................................................................................24
9Other Add-in Components ..........................................................................................................25
9.1 Internal Battery Kit ...............................................................................................................25
9.2 High Temperature Support Option.......................................................................................26
9.3 Additional FAN kit for PCI ....................................................................................................26
10 Add-on Components..................................................................................................................26
10.1 Input Device.......................................................................................................................26
10.2 Server Management License ............................................................................................26
10.3 Dust Proof Kit ....................................................................................................................27
10.4 Tamper Proof Power Button Covers..................................................................................27
10.5 Rack Conversion Kit ..........................................................................................................27
REFERENCES...............................................................................................................28
Server Management ............................................................................................................................28
OS Support Matrix for PCI Cards and Embedded Controllers .......................................................29
Supported PCI cards and Installable Slots.......................................................................................29
Secure Boot Mode...............................................................................................................................30
Copyright Notice and Liability Disclaimer........................................................................................31
REVISION HISTORY .....................................................................................................32

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 3
Technical Specification
Specification
(1 / 2)
Model
T110j-S
Part Number
N8100-2681F, N8100-2682F
Processor
Type
Intel®
Pentium®
processor
G5400
Intel® Xeon®
processor E-
2124
Intel® Xeon®
processor E-
2124G
Clock speed
3.7 GHz
3.3 GHz
3.4 GHz
Number of Processors
1
Cache
4 MB
8MB
8MB
Cores and Threads
2C / 4T
4C / 4T
4C / 4T
Chipset
Intel® C246 Chipset
Memory
Type
DDR4-2666 ECC Unbuffered DIMM
Standard Capacity
0 GB
Maximum Capacity
64 GB (4 x 16 GB)
Internal Storage
Standard Capacity
0 GB
Maximum Capacity
28.8 TB (2 x 12 TB + 2x 2.4TB)
Disk Controller
SATA : 6 Gb/s (Integrated)
SATA/SAS : 6/12 Gb/s (Optional)
RAID
SATA : RAID 0/1/10 (Standard 1 )
SATA/SAS : RAID 0/1/5/6/10/50/60 (Optional)
Hot Plug
Supported with hot plug drive bay
Optical Disk Drive
Optional
3.5-inch Media Bays
2
Disk Drive Bays
2 or 4 or 6
Expansion Slots
Total: 4 slots available
1 PCIe 3.0 x16 (x16 connector)
3 PCIe 3.0 x4 (x8 connector)
Video
Controller (VRAM)
Integrated in Server Management Controller (32MB)
Resolution / Color
1600 x 1200 / 16.7M2
Interfaces
1 VGA (15-pin mini D-sub,1 rear)
1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2 rear)
4 USB 3.0 (2 front, 2 rear) (plus 1 internal USB 3.0)
2 USB 3.1 (2 rear)
2 1000BASE-T LAN connector (RJ-45, 2 rear)
1 1000BASE-T LAN connector for Management (RJ-45, 1 rear)
Server Management
Aspeed AST2500
System Fan
Standard
Power Supply
1 x 250 Watt 80 PLUS® Platinum certified non-hot plug PSU
2 x 460 Watt 80 PLUS® Platinum certified Hot plug PSU
100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz
Power
Consumption
(Max. Config, Idling)
129 VA /
128Watt
176 VA /
174Watt
198 VA /
197 Watt
Power
Consumption
(Max. Config, Operating)
152 VA /
151 Watt
199 VA /
197 Watt
222 VA /
221 Watt
Acoustic Noise
(Sound Pressure
Level) 3
Minimum Config.
28.5 dB
Maximum Config.
37.0 dB
Dimensions (W x D x H )
Standard Bezel: 98.0 x 386.5 x 341.0 mm / 3.9 x 15.2 x 13.4 in
Dust Proof Bezel: 98.0 x 415.7 x 341.0 mm / 3.9 x 16.3 x 13.4 in
Weight (Minimum / Maximum)
8 kg / 11.5 kg, 17.64 lbs. / 25.35 lbs.
Temperature, Relative Humidity (non-condensing)
Operating: 5° to 40° C / 41° to 104° F (Standard)
or 5° to 48° C / 41° to 118° F (Optional), 10 to 85%
Non-Operating: -10° to 55° C / 14° to 131° F, 10 to 85%
Regulatory and Safety
FCC, c-UL, CE, CB, RoHS, WEEE, BSMI, CCC
Operating Systems and Virtualization Software
Microsoft® Windows Server® 2016 Standard
Microsoft® Windows Server® 2016 Datacenter

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 4
1Embedded SATA RAID controller is supported only on limited operating systems.
2Maximum resolution available via Aspeed AST2500 remote console is 1280 x 1024 / 65K colors.
3Noise emission was measured in accordance with ISO 7779, at 25°C. The actual value may vary by the operating environment.
4Support on Xeon processor systems only.
(2 / 2)
Model
T110j-S
Part Number
N8100-2681F, N8100-2682F
Processor
Type
Intel® Xeon ®
processor E-
2126G
Intel® Xeon ®
processor E-
2134
Intel® Xeon®
processor E-
2146G
Intel® Xeon®
processor E-
2174G
Clock speed
3.3 GHz
3.5 GHz
3.5 GHz
3.8 GHz
Number of Processors
1
Cache
12 MB
8MB
12MB
8MB
Cores and Threads
6C / 6T
4C / 8T
6C / 12T
4C / 8T
Chipset
Intel® C246 Chipset
Memory
Type
DDR4-2666 ECC Unbuffered DIMM
Standard Capacity
0 GB
Maximum Capacity
64 GB (4 x 16 GB)
Internal Storage
Standard Capacity
0 GB
Maximum Capacity
28.8 TB (2 x 12 TB + 2x 2.4TB)
Disk Controller
SATA : 6 Gb/s (Integrated)
SATA/SAS : 6/12 Gb/s (Optional)
RAID
SATA : RAID 0/1/10 (Standard 1 )
SATA/SAS : RAID 0/1/5/6/10/50/60 (Optional)
Hot Plug
Supported with hot plug drive bay
Optical Disk Drive
Optional
3.5-inch Media Bays
2
Disk Drive Bays
2 or 4 or 6
Expansion Slots
Total: 4 slots available
1 PCIe 3.0 x16 (x16 connector)
3 PCIe 3.0 x4 (x8 connector)
Video
Controller (VRAM)
Integrated in Server Management Controller (32MB)
Resolution / Color
1600 x 1200 / 16.7M2
Interfaces
1 VGA (15-pin mini D-sub,1 rear)
1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2 rear)
4 USB 3.0 (2 front, 2 rear) (plus 1 internal USB 3.0)
2 USB 3.1 (2 rear)
2 1000BASE-T LAN connector (RJ-45, 2 rear)
1 1000BASE-T LAN connector for Management (RJ-45, 1 rear)
Server Management
Aspeed AST2500
System Fan
Standard
Power Supply
1 x 250 Watt 80 PLUS® Platinum certified non-hot plug PSU
2 x 460 Watt 80 PLUS® Platinum certified Hot plug PSU
100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz
Power
Consumption
(Max. Config, Idling)
211 VA /
210 Watt
204 VA /
203 Watt
219 VA /
218 Watt
207 VA /
206 Watt
Power
Consumption
(Max. Config, Operating)
236 VA /
235 Watt
229 VA /
228 Watt
245 VA /
244 Watt
232 VA /
230 Watt
Acoustic Noise
(Sound Pressure
Level) 3
Minimum Config.
28.5 dB
Maximum Config.
37.0 dB
Dimensions (W x D x H )
Standard Bezel: 98.0 x 386.5 x 341.0 mm / 3.9 x 15.2 x 13.4 in
Dust Proof Bezel: 98.0 x 415.7 x 341.0 mm / 3.9 x 16.3 x 13.4 in
Weight (Minimum / Maximum)
8 kg / 11.5 kg, 17.64 lbs. / 25.35 lbs.
Temperature, Relative Humidity (non-condensing)
Operating: 5° to 40° C / 41° to 104° F (Standard)
or 5° to 48° C / 41° to 118° F (Optional), 10 to 85%
Non-Operating: -10° to 55° C / 14° to 131° F, 10 to 85%
Regulatory and Safety
FCC, c-UL, CE, CB, RoHS, WEEE, BSMI, CCC
Operating Systems and Virtualization Software
Microsoft® Windows Server® 2016 Standard
Microsoft® Windows Server® 2016 Datacenter
1Embedded SATA RAID controller is supported only on limited operating systems.

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 5
2Maximum resolution available via Aspeed AST2500 remote console is 1280 x 1024 / 65K colors.
3Noise emission was measured in accordance with ISO 7779, at 25°C. The actual value may vary by the operating environment.
4Support on Xeon processor systems only.

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 6
External Views
Front View
Legend
A.
Power Button
H.
Global LED 1
B.
Dump (NMI) Button
I.
Global LED 2
C.
BMC Reset Button
J.
USB 3.0 Connectors
D.
Power LED
K.
Optical Disk Drive
E.
Power Capping LED
L.
Cover Key (2.5 inch Drive Configuration)
F.
STATUS LED 1
M.
Drive Bay Cover
G.
STATUS LED 2
N.
Stabilizer
J
A
K
L
M
N
F
D
B
H
C
E
G
I

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 7
Rear Views
Fixed power supply model
Redundant power supply model
Legend
A.
Serial Port Connector
E.
Data LAN Connectors
B.
VGA Connector
F.
PCI Slots
C.
USB Connectors
G.
AC Inlet
D.
Management LAN Connector
H.
Power Supply Unit
F
D
C
B
A
E
G
H

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 8
Dimensions (mm)
Standard Bezel
Tower Orientation
Desktop Orientation
395.4
98.0
200.0
347.1
386.5
347.1
386.5
395.4
104.2

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 9
Tower Orientation (Redundant power supply)
Desktop Orientation (Redundant power supply)
Dust Proof Bezel
Tower Orientation (Fixed power supply)
447.5
98.0
200.0
347.1
415.7
347.1
415.7
447.5
104.2

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 10
Desktop Orientation (Fixed power supply)
415.7
98.0
200.0
347.1
423.7
347.1
415.7
423.7
104.2

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 11
Tower Orientation (Redundant power supply)
Desktop Orientation (Redundant power supply)
447.5
98.0
200.0
347.1
415.7
347.1
415.7
447.5
104.2

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 12
Configuration Diagram
Fixed Power Supply Model
Legend: Standard Components Mandatory Components
Redundant Power Supply Model
Legend: Standard Components Mandatory Components

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 13
Expansion Slots
Legend
#1
PCIe 3.0 x4, x8 connector, Low Profile, up to 168mm length
#2
PCIe 3.0 x4, x8 connector, Low Profile, up to 168mm length
#3
PCIe 3.0 x16, x16 connector, Low Profile, up to 168mm length
#4
PCIe 3.0 x4, x8 connector, Low Profile, up to 168mm length
Slot #4
Slot #3
Slot #2
Slot #1

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 14
Server Configuration
1 Base Models
Product Name / Description
Part Number
Express5800/T110j-S
no Processor, no RAM, no Drive Cage, no HDD, no Optical Drive
Including:
250 Watt non-hot plug power supply
N8100-2681F
Express5800/T110j-S
no Processor, no RAM, no Drive Cage, no HDD, no Optical Drive
Including:
2x 460 Watt hot plug power supply
N8100-2682F
NOTE:
The base model must be ordered with a processor kit, memory, a drive cage, and an optical drive.
2 Processor
Available sockets: 1
Category
Product Name / Description
Part Number
Processors
Required
Pentium G5400 Processor Kit
Intel® Pentium ® Processor G5400 (3.7 GHz, 2C/4T, 4 MB)
N8101-1465F
Xeon E-2124 Processor Kit
Intel® Xeon ® Processor E-2124 (3.3 GHz, 4C/4T, 8 MB)
N8101-1467F
Xeon E-2124G Processor Kit
Intel® Xeon ® Processor E-2124G (3.4 GHz, 4C/4T, 8 MB)
N8101-1468F
Xeon E-2126G Processor Kit
Intel® Xeon ® Processor E-2126G (3.3 GHz, 6C/6T, 12 MB)
N8101-1469F
Xeon E-2134 Processor Kit
Intel® Xeon ® Processor E-2134 (3.5 GHz, 4C/8T, 8 MB)
N8101-1470F
Xeon E-2146G Processor Kit
Intel® Xeon ® Processor E-2146G (3.5 GHz, 6C/12T, 12 MB)
N8101-1472F
Xeon E-2174G Processor Kit
Intel® Xeon ® Processor E-2174G (3.8 GHz, 4C/8T, 8 MB)
N8101-1473F
NOTE:
One processor kit from above must be installed.
3 Memory
Available slots: 4
Product Name / Description
Part Number
8GB DDR4-2666 UNB Memory Kit
8GB Unbuffered ECC DIMM, DDR4-2666
N8102-716F
16GB DDR4-2666 UNB Memory Kit
16GB Unbuffered ECC DIMM, DDR4-2666
N8102-717F
NOTE:
Minimum one memory kit must be installed.
To install by double of memory kit is recommended in order to increase memory transfer speed by dual-channel symmetric
configuration.

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 15
Maximum Available Memory
See the table below for the maximum memory size that you can actually use on your system.
Operating Systems
Maximum Memory Size
Supported by Operating
Systems
Maximum Available Memory
Microsoft Windows Server 2016 Standard 1
Microsoft Windows Server 2016 Datacenter 1
24TB
64GB
1 The maximum available memory size of Hyper-V systems is below:
- Windows Server 2016 : 24 TB

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 16
4 Internal Hard Disk Drives
Front Cage (Required to select)
Front Cage (Additional)
Chassis Internal (Optional Installation
Kit)
4x 2.5-inch SAS/SATA drive
2x 2.5-inch SAS/SATA drive
2x M.2 SATA SSD
2x 3.5-inch SATA HDD
2x 2.5-inch SAS/SATA drive
2.5-inch Drive
The 4x 2.5-inch drive cage can mount four 2.5-inch SAS / SATA drives as standard. For installing more drives, please add an
additional drive cage.
One cables is attached in drive cage, for connection to maximum of four SAS / SATA drives.
3.5-inch Drive
The 2x 3.5-inch drive cage can install two 3.5-inch SATA drives as standard. For installing more drives, please add an additional
drive cage(only 2.5-inch drive is available).
One cables is attached in drive cage, for connection to maximum of two SATA drives.

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 17
4.1 Drive Cage
4.1.1 2.5-inch Drive
Category
Product Name / Description
Part Number
Cable
Internal SAS/SATA Cable
Mini-SAS to mini-SAS
(Attached in Cage)
Drive Cage
Required
2.5-inch Drive Cage
4 x 2.5-inch hot plug drive bays
N8154-82F
Optional Drive Cage
(more than 4 Drive)
2.5-Inch Hot Plug Drive Cage Kit
2x 2.5-inch hot plug drive bays
Including 1x mini-SAS to 2x Single SATA cable
N8154-83F
NOTE:
Up to two kinds of drives selected from SAS 10K HDDs (512n), SAS 10K HDDs (512e), SAS 15K HDDs, SATA HDDs, and
SSDs can be mixed in a system. However, SAS HDDs and SATA HDDs cannot be mixed in the same cage, and HDDs in the
same cage must have the same rotational speed.
Internal RDX drive cannot be installed in the redundant power supply model with optional 2.5-inch drive cage.
When N8154-83F 2.5-Inch Hot Plug Drive Cage Kit is installed, ambient temperature is up to 40 °C .N8181-140F High
Temperature Support Option is not supported.
4.1.2 3.5-inch Drive
Category
Product Name / Description
Part Number
Cable
Internal SAS/SATA Cable
miniSAS to 2x Single SATA
(Attached in Cage)
Drive Cage
Required
3.5-inch Drive Cage
2 x 3.5-inch non hot plug (fixed) drive bays
N8154-136F
Optional Drive Cage
(more than 2 Drive)
2.5-Inch Hot Plug Drive Cage Kit
2x 2.5-inch hot plug drive bays
Including 1x mini-SAS to 2x Single SATA cable
N8154-83F
NOTE:
2.5-inch drives installed in the optional cage must be identical.
Internal RDX drive cannot be installed in the redundant power supply model with optional 2.5-inch drive cage.
Hot plug insertion/removal of any drive is not supported when both 3.5-inch and 2.5-inch drives are installed.
When N8154-83F 2.5-Inch Hot Plug Drive Cage Kit is installed, ambient temperature is up to 40 °C .N8181-140F High
Temperature Support Option is not supported.
Internal RDX drive cannot be installed in the redundant power supply model with optional 2.5-inch drive cage.
Up to two kinds of drives selected from SAS 10K HDDs (512n), SAS 10K HDDs (512e), SAS 15K HDDs, SATA HDDs, and
SSDs can be mixed in a system. However, SAS HDDs and SATA HDDs cannot be mixed in the same cage, and HDDs in the
same cage must have the same rotational speed.
4.2 M.2 SATA SSD Installation Kit
The M.2 SATA SSD can be used for boot drive only.
Installation Kit
Product Name / Description
Part Number
Dual M.2 SATA Drive Installation Kit
One installation kit is supported on a system
M.2 PCIe SSD adapter, 2 x M.2 socket
N8118-307
Internal SAS/SATA Cable
1x Mini SAS HD –2x Single SATA. , 1set
K410-365(00)
NOTE:
Even if no drive is installed, N8154-136F 3.5-inch Drive Cage or N8154-82F 2.5-inch Drive Cage is required.
Up to two M.2 SSDs can be mounted on M.2 installation kit, two M.2 SSDs are required the same capacity.
M.2 SATA SSD is for OS boot only.
Ambient temperature is up to 40 °C .N8181-146F High temperature resistant Kit- is not supported.
When installing M.2 SATA SSD, only N8103-205/-206/-210 is supported with VMware.
When installing M.2 SATA SSD, only Embedded SATA controller or N8103-205/-206/-210 is supported with Wondows.
Mixed installation of M.2 SATA SSD and SSD/HDD is supported on Embedded SATA controller

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 18
4.3 RAID Configuration
4.3.1 Embedded SATA non-RAID Controller
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
4x 6Gb/s SATA
(Standard)
NOTE:
Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS Support Matrix for PCI
Cards and Embedded Controllers.
Hot plug insertion/removal is not supported with the embedded SATA non-RAID controller.
Up to four drives can be installed when you choose the Embedded SATA Non-RAID controller.
All drives within a RAID array should be of the same capacity and rotation speed.
Up to two kinds of drives selected from SAS 10K HDDs (512n), SAS 10K HDDs (512e), SAS 15K HDDs, SATA HDDs, and
SSDs can be mixed in a system. However, SAS HDDs and SATA HDDs cannot be mixed in the same cage, and HDDs in the
same cage must have the same rotational speed.
4.3.2 Embedded SATA RAID Controller for 2.5-inch Drives
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
4x 6Gb/s SATA, RAID0/1/10 capable
(Standard)
Cable
Internal SATA Cable
Mini-SAS to mini-SAS, miniSAS –2x Single SATA. For 2.5-inch drive
cage.
(Attached in Cage)
Internal SAS/SATA Cable
MiniSAS to 2x single SATA. For 3.5-inch drive cage.
(Attached in Cage)
NOTE:
All hard drives within a RAID array should be of the same capacity and rotation speed.
Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS Support Matrix for PCI
Cards and Embedded Controllers.
Embedded SATA controller support on Windows only.
Up to two kinds of drives selected from SAS 10K HDDs (512n), SAS 10K HDDs (512e), SAS 15K HDDs, SATA HDDs, and
SSDs can be mixed in a system. However, SAS HDDs and SATA HDDs cannot be mixed in the same cage, and HDDs in the
same cage must have the same rotational speed.
4.3.3 RAID Controller
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (RAID 0/1)
Avago(LSI) MegaRAID SAS 944N-8i
RAID0/1/10, no memory cache, Int. 8, PCIe 3.0(x8), SAS 12Gb/s, SATA
6Gb/s
N8103-205
RAID Controller (2GB, RAID 0/1, WT/WB)
Avago(LSI) MegaRAID SAS 946N-8i
RAID 0/1, 2GB, Int. 8, PCIe 3.0 x8, SAS 12Gb/s, SATA 6Gb/s
N8103-206
RAID Controller (2GB, RAID 0/1/5/6, WT/WB)
Avago(LSI) MegaRAID SAS 946N-8i
RAID0/1/5/6/10/50/60, 2GB, Int. 8, PCIe 3.0 x8, SAS 12Gb/s, SATA
6Gb/s
NOTE:
It can not be supported with N8118-307 Dual M.2 SATA Drive
Installation Kit
N8103-207
RAID Controller (4GB, RAID 0/1/5/6, WT/WB)
LSI MegaRAID SAS 946N-8i
RAID0/1/5/6/10/50/60, 4GB, Int. 8, PCIe 3.0(x8), SAS 12Gb/s, SATA
6Gb/s
NOTE:
It can not be supported with N8118-307 Dual M.2 SATA Drive
Installation Kit
N8103-208
RAID Controller (2GB, RAID 0/1, WT)
Avago(LSI) MegaRAID SAS 945N-8i
RAID 0/1, 2GB, Int. 8, PCIe 3.0 x8, SAS 12Gb/s, SATA 6Gb/s
N8103-210

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 19
RAID Controller (2GB, RAID 0/1/5/6, WT)
Avago(LSI) MegaRAID SAS 945N-8i
RAID0/1/5/6/10/50/60, 2GB, Int. 8, PCIe 3.0 x8, SAS 12Gb/s, SATA
6Gb/s
NOTE:
It can not be supported with N8118-307 Dual M.2 SATA Drive
Installation Kit
N8103-211
Flash Backup
Recommended
Flash Buckup Unit
for LSI MegaRAID SAS 946N-8i
550mm Cable for Flash Backup Unit included
NOTE:
It can not be connected to N8103-205/-210/-211 RAID Controller
N8103-209
Cable
RAID LED Cable
LED cable for RAID controller
NOTE:
It is required when N8154-136F 3.5-inch drive cage or N8118-307 M.2
SATA SSD Installation kit is installed.
K410-444(00)
Internal SATA Cable
MiniSAS HD to miniSAS HD. For N8154-83F 2.5-inch drive cage.
NOTE:
It is required when 3.5-inch drive cage and N8154-83F 2.5-inch drive
cage are both installed and OS is installed in 2.5-inch drive.
Please connect K410-364(00) to Port 0-3 of the RAID card, and the
internal SAS/SATA cable(attached in 3.5-inch drive cage) to Port 4-7 of
the RAID card.
K410-364(00)
NOTE:
Embedded SATA RAID controller is supported only on limited OS. For more details, please see エラー! 参照元が見つかりませ
ん。
All drives within a RAID array should be of the same type, capacity and rotation speed.
When N8154-83F 2.5-Inch Hot Plug Drive Cage Kit is installed, ambient temperature is up to 40℃.N8181-140F High
Temperature Support Option is not supported.
Up to one RAID Controller can be installed.
All drives within a RAID array should be of the same capacity and rotation speed.
Up to two kinds of drives selected from SAS 10K HDDs (512n), SAS 10K HDDs (512e), SAS 15K HDDs, SATA HDDs, and
SSDs can be mixed in a system. However, SAS HDDs and SATA HDDs cannot be mixed in the same cage, and HDDs in the
same cage must have the same rotational speed.
To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in order to minimize the risk of
becoming multiple hard drives failure during the RAID rebuilding process.
4.4 Internal Drives
4.4.1 2.5-inch SATA Drives
Category
Product Name / Description
Part Number
Drive
SATA
HDD
(512n)
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector
N8150-489
2TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 2 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector
N8150-527
SATA
SSD
(ME)
200GB Hot Plug 2.5-inch SATA SSD
1 x 200 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, ME
N8150-1718
SATA
SSD
(VE)
800GB Hot Plug 2.5-inch SATA SSD
1 x 800 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, VE
N8150-784
1.6TB Hot Plug 2.5-inch SATA SSD
1 x 1.6 TB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, VE
N8150-785
240GB Hot Plug 2.5-inch SATA SSD
1 x 240 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, VE
N8150-1721
480GB Hot Plug 2.5-inch SATA SSD
1 x 480 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, VE
N8150-1722
NOTE:
Hot plug insertion/removal is not supported with the embedded SATA Non-RAID controller.
All drives within a RAID array should be of the same type, capacity and rotation speed.
Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs, SATA SSDs and SAS SSDs can be
mixed.

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110j-S
NEC Corporation Revision 1.0 –December 2018 20
The warranty period of the SSD is the stated period of warranty or until the total bytes of written amount (PBW) exceeds the limit
value. Please regularly check with the Universal RAID Utility.
To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in order to minimize the risk of
becoming multiple hard drives failure during the RAID rebuilding process.
4.4.2 2.5-inch SAS Drives
Category
Product Name / Description
Part Number
Drive
SAS
HDD
(512n)
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector
N8150-479
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector
N8150-480
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector
N8150-481
900GB 10K Hot Plug 2.5-inch SAS HDD
1 x 900 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector
N8150-482
1.2TB 10K Hot Plug 2.5-inch SAS HDD
1 x 1.2TB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector
N8150-483
300GB 15K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512n sector
N8150-485
450GB 15K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512n sector
N8150-486
600GB 15K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512n sector
N8150-518
SAS
HDD
(512e)
1.8TB 10K Hot Plug 2.5-inch SAS HDD
1x 1.8TB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512e sector
N8150-541
2.4TB 10K Hot Plug 2.5-inch SAS HDD
1x 2.4 TB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512e sector
N8150-599
900GB 15K Hot Plug 2.5-inch SASHDD
1x 900 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512e sector
NOTE:
It can not be supported when install N8146-74 Dust Proof Bezel
N8150-586
SAS
SSD
(eMLC)
200GB Hot Plug 2.5-inch SAS SSD
1 x 200 GB SAS SSD, eMLC, 2.5-inch, 12Gb/s, 512n sector
N8150-721
400GB Hot Plug 2.5-inch SAS SSD
1 x 400 GB SAS SSD, eMLC, 2.5-inch, 12Gb/s, 512n sector
N8150-722
NOTE:
Hot plug insertion/removal is not supported with the embedded SATA Non-RAID controller.
All drives within a RAID array should be of the same type, capacity and rotation speed.
Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs, SATA SSDs and SAS SSDs can be
mixed.
The warranty period of the SSD is the stated period of warranty or until the total bytes of written amount (PBW) exceeds the limit
value. Please regularly check with the Universal RAID Utility.
To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in order to minimize the risk of
becoming multiple hard drives failure during the RAID rebuilding process.
4.4.3 3.5-inch SATA Drives
Category
Product Name / Description
Part Number
Drive
SATA
HDD
(512n)
1TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm, 512n sector
N8150-514
2TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm, 512n sector
N8150-515
3TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm, 512n sector
N8150-516
4TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm, 512n sector
N8150-517
SATA
HDD
(512e)
6TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 6 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm, 512e sector
N8150-538
8TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x8 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm, 512e Sector
N8150-539
10TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x10 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm, 512e Sector
N8150-542