NEC SV8500 User manual

FP85-104 S1E
Operations and Maintenance Manual
NWA-041693-001
ISSUE 2.0
Stock # 439TBA
To view the latest issue of this document go to NEC Knowledgebase @ http://www.kbase.cns.nec.com.au & search for NEC-10789

LIABILITY DISCLAIMER
NEC Australia Pty Ltd. reserves the right to change product specifications,
functions, or features, at any time, without notice.
Periodically changes are made to the information contained in this manual.
Although all efforts have been made to ensure that the contents are correct,
NEC shall not be liable for any direct, indirect, consequential or incidental
damages resulting from the use of the equipment, manual or any related
materials.
Should you find any error, NEC welcomes your comments. Please contact
NEC on 1800 819 766.
NEC Australia Pty Ltd. has prepared this document for use by its
employees and customers. The information contained herein is the
property of NEC Australia Pty Ltd. and shall not be reproduced without
prior written approval from NEC AustraliaPty Ltd.
REFERENCES
This document may contain references to models, features and specifications
marketed in other countries and may not be applicable to the Australian and
New Zealand markets. Please contact your system representative for details.
The related Service/Technical Information Bulletin should be read in
conjunction with this document.
TRADE MARKS
Dterm is a registered trademark of NEC Corporation. ElectraMail and Electra
Elite are registered trademarks of NEC America, inc. PCPro is a trademark of
NEC Corporation. UNIVERGE is a trademark of NEC Corporation.
This document may include references to other brand and product names that
are trademarks or registered trademarks which belong to the respective
trademark owner.
Copyright © 2009
NEC Australia Pty Ltd.
Printed in Australia
Note: This disclaimer also applies to all related documents previously published.

LIABILITY DISCLAIMER
NEC Infrontia Corporation reserves the right to change the specifica-
tions, functions, or features, at any time, without notice.
NEC Infrontia Corporation has prepared this document for use by its
employees and customers. The information contained herein is the
property of NEC Infrontia Corporation, and shall not be reproduced
without prior written approval from NEC Infrontia Corporation.
All brand names and product names on this document are trade-
marks or registered trademarks of their respective companies.
Copyright 2008 - 2009
NEC Infrontia Corporation

PL- 1
PRODUCT LIABILITY
PRODUCT LIABILITY
1. USING THE EQUIPMENT SAFELY
The following safety information describes how to avoid injuries while working with the equipment and how to
prevent damage to the equipment. Learn the meaning of the following symbols and then read this section
carefully before using the equipment.
SYMBOL DESCRIPTION
DANGER
Incorrect use of the equipment may cause personal injury or death.
WARNING
Incorrect use of the equipment may cause personal injury or a serious
system fault.
ATTENTION
Incorrect use of the equipment may limit the system performance or
cause the system to fail.
The telephone system can only be used in NEC-designated countries.
If a system-down, malfunction, defect or external factor such as an electrical failure indirectly causes a loss of profit, the
company (or affiliates) will not be held responsible.
The goal is to produce a comprehensive and accurate manual. However, if errors or omissions are found in this manual,
please notify NEC Infrontia Corporation.
If the system requires installation or repair, contact the dealer or its service technician.
Carefully read all the manuals that relate to the system.

PL- 2
PRODUCT LIABILITY
2. SAFETY CONSIDERATIONS
The following describes the safety considerations that must be observed before using the system, the power-
related equipment and the peripheral equipment, such as consoles, the Main Distribution Frame (MDF),
telephones, PCs, printers, etc.
DANGER
If the system emits smoke or a burning, acrid odor, immediately turn off the system power.
Operating the system in this state might cause a fire, an electrical shock, or a system failure. After
turning off the power and confirming that the smoke has disappeared, contact the dealer.
If any equipment, such as the system, the main power source, a cabinet or peripheral equipment tips
over, turn off the power and contact the dealer.
If liquid reaches the inside of the system or the main power source, turn off the power. Operating
the system in this state might cause a fire, an electrical shock, or a system failure.
Do not touch the internal parts of the main power source to disassemble or configure it. This action
may cause a fire, an electrical shock or a system failure.
NEC Infrontia Corporation does not take any responsibility for disassembled or reconfigured
equipment.
Do not put any container objects (such as a vase or a cup) on the main power source or any
peripheral equipment. It might cause a fire, an electrical shock or a system failure.
Do not tamper with, modify, forcefully bend, forcefully remove or twist an electrical cord or any
wiring to or from the system, the main power source or any peripheral equipment. It might cause a
fire, an electrical shock, or a system failure. If the wiring is damaged, contact the dealer.
Correctly insert all of the electrical plugs into the electrical outlets. Before inserting a plug into an
electrical outlet, ensure that there is no dust on the plug’s blades. If there is dust on a blade, it might
cause a fire.
Do not use power other than the power that was designated for the system when it was installed.
PWR
dust
PWR

PL- 3
PRODUCT LIABILITY
DANGER
Do not attempt to repair or move the main power source without assistance from the dealer.
Do not put any metal or combustible objects into a vent of the system, the main power source, or
any peripheral equipment. Operating the system in this state might cause a fire, an electrical shock,
or a system failure. If this occurs, turn off the power and contact the dealer.
Be careful when using any peripheral equipment’s Liquid Crystal Display (LCD). If the liquid
leaks, it can be harmful to the user and to the system.
Before connecting any non-NEC, customer-provided equipment, check with the supplier to ensure
that the equipment is compatible. If the supplier cannot confirm the compatibility, do not connect
the equipment. Connecting incompatible equipment might cause a fire or an electrical shock.
PWR
?

PL- 4
PRODUCT LIABILITY
WARNING
Do not place any object on the system or the main power source. If the object falls, it might cause
personal injury or damage to the equipment.
When removing a plug from an outlet, be sure to grip the plug, not the cord. Gripping the cord to
remove the plug could cause a fire or an electrical shock to occur.
If lightning causes a fault, contact the dealer.
Provide the appropriate temperature, humidity, and ventilation on an around-the-clock basis. For
example, at a height that is one meter (3.28 feet) above the floor, the temperature should be between
20° C and 25qC (68° F to 77° F) and the humidity should be approximately 50%.
Take appropriate anti-static measures so that the other end of the anti-static kit can be connected to
the metal part of the frame.
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required

PL- 5
PRODUCT LIABILITY
WARNING
Observe the following precautions when using any optional batteries:
• The system’s emergency back-up battery may be a rechargeable lead battery. Check the
emergency battery for an electrical failure.
• Battery acid (electrolyte) is extremely harmful to human skin and eyes. If battery acid
contacts skin, wash the affected area with soap and water. If battery acid contacts the eyes,
flush the eyes with water. In either event, seek medical attention. If there is battery acid on a
cloth, use water to wash the battery acid from the cloth.
• Do not intentionally short batteries. Do not put the battery near a fire or in a fire. Do not
disassemble the battery, drop it or knock it against another object.
• The battery’s life expectancy is affected by its environment. The normal battery life is
approximately three years. If the battery is used in an outdoor setting and is exposed to high
temperatures, its life expectancy drops to approximately one year.
• Perform periodic diagnostic tests and maintenance procedures on the emergency battery and
its terminals to ensure their readiness. If there is a power failure and the emergency battery is
not ready, then the system will not work. Additionally, a damaged or dead battery, or terminals
that need replacement might cause battery acid to leak, which might cause smoke or a fire.
The battery and terminals are periodic replacement parts (the cost is chargeable to the
customer). A service contract, with the supplier or service technician, to perform routine
maintenance for the battery is recommended.
Do not touch peripheral equipment with wet hands. Do not allow any liquid to touch any of the
peripheral equipment.
Do not touch the printer’s internal components when replacing disposables such as a cartridge or a
ribbon. Ensure that the printer is turned off and that it is not hot in order to prevent burns from any
accidental contact with the internal components.
Do not drop the peripheral equipment or knock it against another object. These actions might cause
an equipment failure.

PL- 6
ATTENTION
Do not use benzine, thinner or alcohol for cleaning. When removing dust and dirt, put diluted, mild
detergent on a cloth and then wring out the cloth. Remove the dust and dirt with the cloth and then
wipe the cleaned area with a dry cloth.
Do not place any equipment in the following environments:
• Locations that are exposed to direct sunlight
• Locations where the moisture level exceeds the allowed level
• Locations where the equipment might be exposed to water, oil, and chemicals
• Locations with very low temperatures, such as in a walk-in cooler or freezer
• Locations that are exposed to Electromagnetic Interference (EMI) from devices such as
television sets and two-way radios
• Locations that receive illegal electric waves
The life expectancies of the system and the main power source will be shortened if placed in a
location that is affected by hydrogen sulfide or salt, such as a seaside area.
Thinner

REGULATORY
R-1
REGULATORY NOTICE (For North America)
1. CUSTOMER INFORMATION FOR TELEPHONE TERMINAL EQUIPMENT (TTE)
This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the
equipment is a label that contains, among other information, a product identifier in the format:
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The telephone company may make changes in its technical operations and procedures. When such changes af-
fect the compatibility or use of the UNIVERGE SV8500 system, the telephone company is required to give
adequate notice of the changes in order for you to maintain uninterrupted service.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most, but
not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may
be connected to a line, as determined by the total RENs, contact the local telephone company. For products
approved after July 23, 2001, the REN for this product is the product identifier in format:
US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN
of 0.3).
Connection to party line service is subject to state tariffs. Contact the state public utilities commission, public
service commission or corporation commission for information.
For single and two-line equipment that connects to the telephone network via a plug and jack, the plug and jack
used with this equipment must comply with FCC Part 68 rules.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord
and modular plug is provided with this product. It is designed to be connected to a compatible modular jack
that is also compliant.
1.1 TELEPHONE/SERVICE PROVIDER COMPANY NOTIFICATION
Before connecting this telephone system to the telephone network, the following information must be provided
to the telephone company:
• Your telephone number.
• FCC registration number:
For SV8500 system, use the following number:
FCC Product Identifier: US:NIFMF21BSN8153, US:NIFPF21BSN8153, US:NIFKF21BSN8153
Ringer Equivalence Number (REN): 2.1B
USOC jacks required: RJ21X, RJ2EX, RJ2GX

REGULATORY
R-2
1.2 INCIDENCE OF HARM
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. But if advance notice is not practical, the telephone com-
pany will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint
with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could af-
fect the operation of the equipment. If this happens, the telephone company will provide advance notice in or-
der for you to make necessary modifications to maintain interrupted service.
1.3 REPAIR SERVICE REQUIREMENTS
If the equipment is causing harm to the telephone network, the telephone company may request that you dis-
connect the equipment until the problem is resolved.
If equipment malfunctions, all repairs must be performed by an authorized agent of NEC Unified Solutions,
Inc. or by NEC Unified Solutions, Inc. The user requiring service is responsible for reporting the need for ser-
vice to an NEC Unified Solutions, Inc. authorized agent or to NEC Unified Solutions, Inc.
1.4 PRIVATE (LEASED) LINES
For Private (Leased) Line (Analog Data Format) equipment, type JM8 jack is required. Refer to ATIS Tech-
nical Report No. 5 for details on this connector.
The Facility Interface Code (FIC) associated with each private line application represents the type of service
that will be provided by the telephone company. The user instructions must contain a detailed list of private
line ports and the associated FICs for which the equipment has been approved. In addition, the Service Order
Code (SOC) must also be included for analog systems. The SOC indicates the degree of network protection
provided by the equipment,.
For Private (Leased) Line (Digital Format) equipment, in addition to the general requirements for all equip-
ment, certain digital connections require that an encoded analog content and billing protection affidavit be pro-
vided the telephone company. Customer instructions must contain information on the preparation and
submission of the affidavit.
To comply with state tariffs, the telephone company must be given notification prior to connection. In some
states, the state public utility commission, public service commission or corporation commission must give pri-
or approval of connection.
1.5 TOLL RESTRICTION AND LEAST COST ROUTING EQUIPMENT
The consumer/purchaser/supplier instructions accompanying this equipment and/or software features must
contain the following notice:
The software contained in the UNIVERGE SV8500 to allow user access to the network must be upgraded to
recognize newly established network area codes and exchange codes as they are placed into service.

REGULATORY
R-3
Failure to upgrade the premises systems or peripheral equipment to recognize the new codes as they are estab-
lished will restrict the customer and the customer’s employees from gaining access to the network and these
codes.
1.6 DIRECT INWARD DIALING
Note: ALLOWING THIS EQUIPMENT TO BE OPERATED IN SUCH A MANNER AS TO NOT PROVIDE
FOR PROPER ANSWER SUPERVISION IS A VIOLATION OF PART 68 OF THE FCC RULES.
Direct Inward Dialing (DID) must contain the following:
Proper Answer Supervision is when this equipment returns answer supervision to the Public Switched Tele-
phone Network (PSTN) when Direct Inward Dialing (DID) calls are:
• Answered by the called station.
• Answered by the Attendant.
• Routed to a recorded announcement that can be administered by the Customer Premise Equipment (CPE)
user.
• Routed to a dial prompt.
This equipment returns answer supervision on all DID calls forwarded to the Public Switched Telephone Net-
work (PSTN). Permissible exceptions are:
• A call is unanswered.
• A busy tone is received.
• A reorder tone is received.
1.7 VOICE ANNOUNCEMENT/MONITORING OVER DID LINES
When using voice announcement or monitoring over DID Lines, observe the following.
CAUTION
• Using the Voice Announcement feature to eavesdrop or record sound activities at the other end of the tele-
phone line may be illegal under certain circumstances and laws. Consult a legal advisor before imple-
menting any practice to monitor or record a telephone conversation. Some federal and state laws require
a party monitoring or recording a telephone to use a beep-tone(s), notify all parties to the telephone con-
versation and/or obtain consent of all parties to the telephone conversation. In monitoring or recording
sound activities at the other end of the telephone line using the Voice Announcement feature, the sound of
the alert tone at the beginning of the Voice Announcement may or may not be considered sufficient under
applicable laws. Some of the applicable laws provide for strict penalties for illegal monitoring or record-
ing of telephone conversations.

REGULATORY
R-4
1.8 EQUAL ACCESS REQUIREMENTS
If equipment such as Private Branch Exchanges (PBX), key systems or customer-owned coin/credit card tele-
phones is sold to a call aggregator, it must be capable of providing users access to interstate providers of op-
erator services through the use of access codes. Modification of this equipment by call aggregators to block
access dialing codes is a violation of the Telephone Operator Consumers Act of 1990.
1.9 ELECTRICAL SAFETY ADVISORY
Parties responsible for equipment requiring AC power should consider including an advisory notice in their
customer information suggesting the customer use a surge arrestor. Telephone companies report that electrical
surges, typically lightening transients, are very destructive to customer terminal equipment connected to AC
power sources. This has been identified as a major nationwide problem.
1.10 HEARING AID COMPATIBILITY
NEC Multiline Terminals and NEC Single Line Telephones that are provided for this system are hearing aid
compatible. The manufacturer of other Single Line Telephones for use with the system must provide notice of
hearing aid compatibility to comply with FCC rules that now prohibit the use of non-hearing aid compatible
telephones.
1.11 MUSIC ON HOLD
Note: "In accordance with U.S. Copyright Law, a license may be required from the American Society of Com-
posers, Authors and Publishers, or other similar organization, if radio or TV broadcasts are transmit-
ted through the Music On Hold feature of this telecommunication system. NEC Unified Solutions, Inc.,
hereby disclaims any liability arising out of the failure to obtain such a license."
2. RADIO FREQUENCY INTERFERENCE
In compliance with FCC Part 15 rules, the following statement is provided:
Note: “This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
Note: Modifying this equipment without an approval from NEC Unified Solutions, Inc. may void your author-
ity granted by the FCC to operate the equipment.”
3. SAFETY INFORMATION
This equipment has been certified by Canadian Standards Association and found to comply with all applicable
requirements:
• CAN/CSA C22.2 No. 0-M – General Requirements – Canadian Electrical Code, Part II

REGULATORY
R-5
• CAN/CSA C22.2 No. 60950-1-03 – Safety of Information Technology Equipment – Part l: General Re-
quirements
• UL 60950-1-SAFETY, 1st Edition – Safety of Information Technology Equipment – Part I: General Re-
quirements
4. INDUSTRY CANADA REQUIREMENTS
Industry Canada has established rules that permit this telephone system to be directly connected to the tele-
phone network. Prior to the connection or disconnection of this telephone system to or from the telephone net-
work, the telephone company must be provided with the following information.
This product meets the applicable Industry Canada Technical Specifications/Le present material est conforme
aux specifications techniques applicables d’industrie Canada.
(1) Your telephone number.
(2) IC registration number: IC: 140L-SN8153
(3) Ringer Equivalence Number (REN) of the equipment: 2.1
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of
the local telecommunications company. The equipment must also be installed using an acceptable method of
connection. The customer should be aware that compliance with the above conditions may not prevent degra-
dation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any re-
pairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommu-
nications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility, tele-
phone lines and internal metallic water pipe system, when present, are connected together. This precaution
may be particularly important in rural areas.
CAUTION
• Users should not attempt to make such connections themselves, but should contact the applicable electri-
cal inspection authority or electrician.
• The Ringer Equivalence Number (REN) is an indication of the maximum number of devices allowed to be
connected to the telephone interface. The termination on an interface may consist of any combination of
devices subject only to the requirement that the sum of RENs of all the devices does not exceed five/L’in-
dice d’equivalence de la sonnerie (IES) sert a indiquer le nombre maximal de terminaus qui peuvent etre
raccordes a une interface telephonique. La terminaison d’une interface peut consister en une combinai-
son quelconque de dispositifs, a la seule condition que la somme d’indices d’equivalence de la sonnerie
de tous les dispositifs n’excede pas 5.
• This equipment has been certified by the Canadian Standards Association and found to comply with all
applicable requirements of the standard for telephone equipment C 22.2 No. 225.

REGULATORY
R-6
• This equipment meets IC requirements CS03, PART II, PART III, PART VI.
• This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus
as set out in the radio interference regulations of Industry Canada/Le present appareil numerique n’emet
pas de bruits radioelectriques depassant les limites applicables aux appareils numeriques de Classe A
prescrites dans le reglement sur le brouillage radioelectrique edicte par Industrie Canada.
5. BATTERY DISPOSAL
The UNIVERGE SV8500 system includes the batteries listed below. When disposing of these batteries, Chas-
sis, and/or Blades, you must comply with applicable federal and state regulations regarding proper disposal
procedures.
IMPORTANT SAFEGUARDS FOR BATTERY DISPOSAL
• DO NOT PLACE USED BATTERIES IN YOUR REGULAR TRASH! THE PRODUCT YOU PUR-
CHASED CONTAINS LITHIUM, NICKEL-CADMIUM OR SEALED LEAD BATTERIES. LITHIUM,
NICKEL-CADMIUM OR SEALED LEAD BATTERIES MUST BE COLLECTED, RECYCLED, OR DIS-
POSED OF IN AN ENVIRONMENTALLY SOUND MANNER.
• The incineration, landfilling or mixing of nickel-cadmium or sealed lead batteries with the municipal sol-
id waste stream is PROHIBITED BY LAW in most areas. Contact your local solid waste management of-
ficials for other information regarding the environmentally sound collection, recycling, and disposal of
the battery.
Battery Types and Quantities for Chassis and Blades
Unit Name Type of Battery Quantity
MH250 (WLPS3(E)-A) Lithium-ion 1
PSIII (PS3D) Lithium-ion 1
CT-12 Headset Cordless Nickel Metal-Hydride 1
DTH-4R-2 Nickel Metal-Hydride 1
DTL-8R-1 Nickel Metal-Hydride 1
DTR-1HM-1 TEL Lithium 1
DTR-1R-2 Nickel-Cadmium 1
DTR-4R-2 TEL Nickel-Cadmium 1
DTU-4R-1 TEL Lead Acid 1
Headset Cordless II Nickel Metal-Hydride 1
Bluetooth®Cordless Handset Lithium-ion 1

REGULATORY
R-7
• Nickel-Cadmium (or sealed lead) batteries must be returned to a federal or state approved nickel-cadmi-
um (or sealed lead) battery recycler. This may be where the batteries were originally sold or a local seller
of automotive batteries. Contact your local waste management officials for other information regarding
the environmentally sound collection, recycling and disposal of the battery contained in this product. For
Ni-Cd batteries, you can also call 1-800-8-BATTERYSM when further information is required.
• The packaging for the UNIVERGE SV8500 system contains the following labels regarding proper dispos-
al.
PRODUCT PACKAGE LABELING
CONTAINS NICKEL-CADMIUM BATTERY.
BATTERY MUST BE RECYCLED OR
DISPOSED OF PROPERLY. MUST NOT BE
DISPOSED OF IN MUNICIPAL WASTE.
CONTAINS SEALED LEAD BATTERY.
BATTERY MUST BE RECYCLED. MUST NOT
BE DISPOSED OF IN MUNICIPAL WASTE.
Pb
Ni-Cd
CONTAINS NICKEL-METAL HYDRIDE
BATTERY. BATTERY MUST BE RECYCLED
OR DISPOSED OF PROPERLY. MUST NOT
BE DISPOSED OF IN MUNICIPAL WASTE.
Ni-MH

REGULATORY
R-8
REGULATORY NOTICE (For EU)
1. PREFACE
This manual is valid for the UNIVERGE SV8500 telephone system.
Some products described in this manual are not (yet) available for specific countries or markets. For this rea-
son, the related specifications, instructions for installation and use of these specific products are not valid for
these markets. Refer to NEC Philips for more details in case of any questions about these products.
1.1 CE Notice (European Union)
The equipment described in this manual is intended to be connected to local area networks (LAN) and supports
a wide range of peripheral equipment. Additional interfaces are available for connection to public analogue
and digital telecommunication networks which comply with:
• ETS 300 011 (PRI)
• ETS 300 012 (BRI)
• ETS 300 402 (PRI & BRI)
• ETS 300 403 (PRI & BRI)
• TBR3 :ISDN basic rate interface
• TBR4 :ISDN primary rate interface
• TBR21 :Analogue interface
To take advantage of all features of this system and the connected equipment, the country specific or network
specific features should match the supported features of the system. For an overview of the supported features,
refer to the detailed documentation that comes with this system, contact your local NEC Philips representative
or the support desk of NEC Philips Unified Solutions.
Hereby, “NEC Philips Unified Solutions”, declares that this product is in compliance with the essential require-
ments and other relevant provisions of Directive 1999/5/EC.
1.2 Electromagnetic compatibility
For some of the SV8500 communication platform components the following warning is applicable:
WARNIG : This is a class A product.
In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.

REGULATORY
R-9
Notice that this warning is only applicable to components of the SV8500 communication platform of which
the product type plate indicates “Complies with EN55022 Class A”.
2. PRODUCT DISPOSAL INFORMATION
2.1 For countries in the European Union
Electrical and electronic products including the cables, plugs and accessories should be disposed of separately
in order to allow proper treatment, recovery and recycling. These products should be taken to a designated fa-
cility where the best available treatment, recovery and recycling techniques are available. Separate disposal
has significant advantages: valuable materials can be re-used and it prevents the dispersion of unwanted sub-
stances into the municipal waste stream. This contributes to the protection of human health and the environ-
ment.
Please be informed that a fine may be imposed for illegal disposal of electrical and electronic products via the
general municipal waste stream.
To facilitate separate disposal and environmentally sound recycling arrangements have been made for local
collection and recycling. If you need to dispose of your electrical and electronic products, please refer to your
supplier or the contractual agreements that your company made when these products were acquired.
At www.nec-philips.com/weee you can find information about separate disposal and environmentally sound
recycling.
2.2 For countries outside the European Union
Disposal of electrical and electronic products in countries outside the European Union should be done in line
with the local regulations. If no arrangement has been made with your supplier, please contact the local author-
ities for further information.
3. Declaration of Conformity
•ýesky
“NEC Philips Unified Solutions” tímto prohlašuje, že tento “SV8500” je ve shodČse základními
požadavky a dalšími pĜíslušnými ustanoveními smČrnice 1999/5/ES.
http://www.nec-philips.com/doc
•Dansk
Undertegnede “NEC Philips Unified Solutions” erklærer herved, at følgende udstyr “SV8500” overhold-
er de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
http://www.nec-philips.com/doc
•Deutsch
The symbol depicted here has been affixed to your product in order to inform you that electrical and elec-
tronic products should not be disposed of as municipal waste.

REGULATORY
R-10
Hiermit erklärt “NEC Philips Unified Solutions”, dass sich das Gerät “SV8500” in Übereinstimmung mit
den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/
EG befindet.
http://www.nec-philips.com/doc
• Eesti
Käesolevaga kinnitab “NEC Philips Unified Solutions” seadme “SV8500” vastavust direktiivi 1999/5/EÜ
põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
http://www.nec-philips.com/doc
• English
Hereby, “NEC Philips Unified Solutions”, declares that this “SV8500” is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
http://www.nec-philips.com/doc
•Español
Por medio de la presente “NEC Philips Unified Solutions” declara que el “SV8500” cumple con los req-
uisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
http://www.nec-philips.com/doc
•ǼȜȜȘȞȚțȒ
ȂǼ ȉǾȃ ȆǹȇȅȊȈǹ Ǿ NEC Philips ǼȃȅȆȅǿǾȂǼȃǼSȁȊ SǼǿSǻǾȁȍȃǼǿ ȅȉǿ “SV8500”
ȈȊȂȂȅȇĭȍȃǼȉǹǿ ȆȇȅȈ ȉǿȈ ȅȊȈǿȍǻǼǿȈ ǹȆǹǿȉǾȈǼǿȈ Ȁǹǿ ȉǿȈ ȁȅǿȆǼȈ ȈȋǼȉǿȀǼȈ
ǻǿǹȉǹȄǼǿȈ ȉǾȈ ȅǻǾīǿǹȈ 1999/5/ǼȀ.
http://www.nec-philips.com/doc
•Français
Par la présente “NEC Philips Unified Solutions” déclare que l'appareil “SV8500” est conforme aux exi-
gences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
http://www.nec-philips.com/doc
•Íslenska
Hér með lýsir “NEC Philips Unified Solutions” yfir því að “SV8500” er í samræmi við grunnkröfur og
aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
http://www.nec-philips.com/doc
•Italiano
Con la presente “NEC Philips Unified Solutions” dichiara che questo “SV8500” è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
http://www.nec-philips.com/doc
•Latviski

REGULATORY
R-11
Ar šo “NEC Philips Unified Solutions” deklarƝ, ka “SV8500” atbilst DirektƯvas 1999/5/EK bnjtiskajƗm
prasƯbƗm un citiem ar to saistƯtajiem noteikumiem.
http://www.nec-philips.com/doc
•Lietuviǐ
Šiuo “NEC Philips Unified Solutions” deklaruoja, kad šis “SV8500” atitinka esminius reikalavimus ir ki-
tas 1999/5/EB Direktyvos nuostatas.
http://www.nec-philips.com/doc
•Malti
Hawnhekk, “NEC Philips Unified Solutions”, jiddikjara li dan “SV8500” jikkonforma mal-ƫtiƥijiet es-
senzjali u ma provvedimenti oƫrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
http://www.nec-philips.com/doc
•Magyar
Alulírott, “NEC Philips Unified Solutions” nyilatkozom, hogy a “SV8500” megfelel a vonatkozó
alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
http://www.nec-philips.com/doc
•Nederlands
Hierbij verklaart “NEC Philips Unified Solutions” dat het toestel “SV8500” in overeenstemming is met
de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
http://www.nec-philips.com/doc
•Norsk
“NEC Philips Unified Solutions” erklærer herved at utstyret “SV8500” er i samsvar med de grunn-
leggende krav og øvrige relevante krav i direktiv 1999/5/EF.
http://www.nec-philips.com/doc
•Polski
Niniejszym, "NEC Philips Unified Solutions" deklaruje, ze “SV8500” jest zgodny z wymaganiami i in-
nymi warunkami Dyrektywy 1999/5/EC.
http://www.nec-philips.com/doc
•Português
“NEC Philips Unified Solutions” declara que este “SV8500” está conforme com os requisitos essenciais
e outras disposições da Directiva 1999/5/CE.
http://www.nec-philips.com/doc
•Slovensko