NEC NovaScale R630 User manual

()
■■■■■■■
■■■■■■■
■■■■■■■
■■■■■■■
■■■■■■■
■■■■■■■
■■■■■■■
■■■■■■■
■■■■■■■
■■■■■■■
■■■■■■■
■■■■■■■
■■■■■■■
■■■■■■■
User Guide
NovaScale R630

Proprietary Notice and Liability Disclaimer
The information disclosed in this document, including all designs and related materials, is
the valuable property of NEC Computers and/or its licensors. NEC Computers and/ or its
licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this
document, including all design, manufacturing, reproduction, use, and sales rights thereto,
except to the extent said rights are expressly granted to others.
To allow for design and specification improvements, the information in this document is
subject to change at any time, without notice. Reproduction of this document or portions
thereof without prior written approval of NEC Computers is prohibited.
The Bull product(s) discussed in this document are warranted in accordance with the terms
of the Warranty Statement accompanying each product. However, actual performance of
each product is dependent upon factors such as system configuration, customer data, and
operator control. Since implementation by customers of each product may vary, the
suitability of specific product configurations and applications must be determined by the
customer and is not warranted by Bull.
rev 1.0 October 2007
Copyright 2007
NEC Computers S.A.S.
All Rights Reserved

iii
Keep this User's Guide handy for quick reference when necessary.
SAFETY INDICATIONS
To use Server series safely, follow the instructions in this User's Guide.
This guide explains components that pose a danger, types of dangers, and actions taken to prevent them; such
components are labeled warning.
This guide and warning labels use “WARNING” and “CAUTION” to indicate a danger depending on the degree. These
terms are defined as follows:
WARNING Indicates a danger that could lead to a death or serious injury.
CAUTION Indicates a danger that could lead to a burn, other injuries or damage to
physical assets.
This guide uses the following three types of symbols to give indications and precautions against a danger. They are
defined as follows:
Indicates that there is a risk of danger. Each image symbolizes a particular type of
danger. (Attention)
Indicates what you must not do. Each image symbolizes a particular type of
prohibition. (Prohibited actions)
Indicates what you must do. Each image symbolizes a particular type of action
necessary to avoid a danger. (Mandatory actions)
(Example) Symbol to draw attention
Term indicating a degree of danger
CAUTION
High temperature.
Immediately after the power-off, system components such as hard disk are
very hot. Wait the server to cool down completely before adding/removing
some component.
Symbol indicating a prohibited
action (may not always be
indicated)
Description of a danger

iv
SYMBOLS USED IN THIS USER'S GUIDE AND WARNING LABELS
Attention
Indicates a risk of an electric shock.
Indicates a risk of a personal injury due to heat.
Indicates a risk of catching your fingers.
Indicates a risk of a fire or smoke.
Indicates a general precaution or warning that is not defined herein.
Indicates a risk of losing eyesight due to laser beam.
Indicates a risk of an explosion.
Indicates a risk of a personal injury.
Prohibited actions
Indicates a general prohibition that is not defined herein.
Do no touch the indicated area. There is a risk of an electric shock or fire.
Do not touch with wet hands. There is a risk of an electric shock.
Keep from flame. There is a risk of a fire.
Avoid using water or liquid nearby. If it spills on the equipment, there is a risk of an
electric shock or fire.
Do not disassemble, repair, or modify the equipment. There is a risk of an electric
shock or fire.
Mandatory actions
Unplug the server. There is a risk of an electric shock or fire.
Indicates a general action to take that is not defined herein. Make sure to follow the
instructions.

v
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
This class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
This system is classified as a CLASS 1 LASER PRODUCT. This label id located on the internal
DVD-ROM installed in your system.
NOTE: This product provides resistance against hardware faults with its redundant hardware modules. However, this
does not mean complete fault-tolerance is assured. For example, there is a risk of system down when:
– A fatal fault occurs in software.
– Both modules within a redundant hardware pair break down.
– A fatal fault occurs in a non-redundant component, such as the clock generator circuitry or the interconnect
backplane.
– The entire system is cut off from AC power.
CLASS 1
LASER PRODUCT

vi
Trademarks and Patents
EXPRESSBUILDER and NEC ESMPRO are trademarks of NEC Corporation.
Microsoft, and Windows are registered trademarks of Microsoft Corporation in the United States and other countries.
All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of their
respective trademark owners.
Microsoft Windows Server 2003 R2 Standard x64 Edition operating system, Microsoft Windows Server 2003 R2
Enterprise x64 Edition operating system, Microsoft Windows Server 2003 Standard x64 Edition operating system, and
Microsoft Windows Server 2003 Enterprise x64 Edition operating system are called Windows Server x64 Edition for
short.
Microsoft Windows Server 2003 R2 32-bit Standard Edition operating system, Microsoft Windows Server 2003 R2
32-bit Enterprise Edition operating system, Microsoft Windows Server 2003 Standard Edition operating system and
Microsoft Windows Server 2003 Enterprise Edition operating system are called Windows Server 2003 for short.
Microsoft Windows 2000 Server operating system, Microsoft Windows 2000 Advanced Server operating system and
Microsoft Windows 2000 Professional operating system are called Windows 2000 for short. Microsoft Windows Vista
Business operating system is called Windows Vista for short. Microsoft Windows XP Professional x64 Edition
operating system is called Windows XP x64 Edition for short. Microsoft Windows XP Home Edition operating system
and Microsoft Windows XP Professional operating system is called Windows XP for short. Microsoft Windows NT
Server network operating system version 3.51/4.0 and Microsoft Windows NT Workstation operating system version
3.51/4.0 are called Windows NT for short. Microsoft Windows Millennium Edition Operating System is called
Windows Me for short. Microsoft Windows 98 operating system is called Windows 98 for short. Microsoft Windows 95
operating system is called Windows 95 for short.
Names used with sample applications are all fictitious. They are unrelated to any existing product names, names of
organizations, or individual names.
To prevent voltage sag:
This product may be affected by voltage sag caused due to lightning. To prevent voltage sag, you are recommended to
use an AC uninterruptible power supply (UPS) unit.

vii
PREFACE
Welcome to the Fault Tolerant Server series.
Fault Tolerant Server series is a “fault-tolerant (ft)” server focusing on “high reliability” in terms of fault-tolerance, in
addition to “high performance,” “scalability,” and “general versatility” provided by Server series. In the event of trouble,
its dual configuration will allow the system to instantaneously isolate the failed parts to assure non-stop running;
operation will be moved smoothly from one module to the other, minimizing damage to it. You can use this Fault
Tolerant Server series in a mission-critical system where high availability is required. By the use of Windows Server
2003 operating system, it also provides outstanding openness for general-purpose applications, etc.
To make the best use of these features, read this User's Guide thoroughly to understand how to operate Fault Tolerant
Server series.

viii
ABOUT THIS USER'S GUIDE
This User's Guide helps a user to properly setup and use the product.
Consult this guide to ensure safety as well as to cope with trouble during a system setup and daily operation.
Keep this manual handy.
This User's Guide is intended for users who have a good knowledge on the basic use of Windows operating systems and
general I/O devices such as a keyboard and mouse.
How to Use This User's Guide
This guide consists of eight chapters and appendices. To help you find a solution quickly, the guide contains the
following information:
For descriptions on setting up this product, see the separate volume “User’s Guide (Setup).”
Read “Precautions for Use” first.
Before going on to main chapters, be sure to read “Precautions for Use.” These precautions are very important for using
the product safely.
Chapter 1 Precautions for Use
This chapter describes precautions necessary to use the product safely and properly. Be
sure to read this chapter before using the product. It also provides information on user
support. It will be helpful when you need maintenance service, support, etc.
Chapter 2 General Description
This chapter describes what you should know about the product: its component names,
functions, operating procedures as well as handling of devices and other parts.
Chapter 3 Windows Setup and Operation
This chapter describes setup and operation specific to the product when it is on
Windows.
Chapter 4 System Configuration
This chapter describes how to make settings of built-in basic input/output system. It also
describes factory-shipped parameters.
Chapter 5 Installing and Using Utilities
This chapter describes features and operating procedures of a standard utility
“EXPRESSBUILDER.” It also describes procedures to install and operate various
software programs contained in its CD-ROM.
Chapter 6 Maintenance
This chapter describes maintenance procedures and use of maintenance tools. If you
need to move the product for maintenance purposes, follow the steps provided in this
chapter.
Chapter 7 Troubleshooting
If the product does not work properly, see this chapter before deciding that it is a
breakdown.
Chapter 8 System Upgrade
This chapter describes procedures to add options and precautions. See also this chapter
when you replace failed components.
Appendix A Specifications
This appendix lists specifications of the product.
Appendix B I/O Port Addresses
This appendix lists factory-assigned I/O port addresses.

ix
Additional symbols
The following symbols are used throughout this User's Guide in addition to the caution symbols describe at the
beginning.
IMPORTANT: Important points or instructions to keep in mind when using the
server or software
CHECK: Something you need to make sure when using the server of
software
TIPS: Helpful information, something useful to know
Accessories
This product is shipped with various accessories. See the packing list to make sure everything is included and check the
individual items. If some component is missing or damaged, contact your sales agent.
Keep the accessories in a safe place. You will need them when you perform setup, addition of options, or
replacement of failed components.
To check EXPRESSBUILDER components, see the attached list.
Be sure to fill out and mail the software registration card that is attached to your operating system.
Make backup copies of included floppy disks, if any. Keep the original disks as the master disks; use these
copies in operation.
Improper use of an included floppy disk or CD-ROM may alter your system environment. If you find
something unclear, stop using them and contact your sales agent.

x
CONTENTS
PREFACE......................................................................................................................................vii
ABOUT THIS USER'S GUIDE...................................................................................................viii
Chapter 1 ...........................................................................................................................1-1
Precautions for Use.......................................................................................................... 1-1
PRECAUTIONS FOR SAFETY..................................................................................................1-2
General.....................................................................................................................................1-2
Use of Power Supply and Power Cord.....................................................................................1-3
Installation, Relocation, Storage and Connection....................................................................1-4
Cleaning and Handling of Internal Devices.............................................................................1-6
During Operation.....................................................................................................................1-7
Rack-mount Model..................................................................................................................1-8
For Proper Operation ...............................................................................................................1-9
DISPOSAL OF EQUIPMENTAND CONSUMABLES...........................................................1-10
IF SYSTEM TROUBLE IS SUSPECTED ................................................................................1-11
ABOUT REPAIR PARTS........................................................................................................... 1-11
ABOUT OUR WEB SERVICE ................................................................................................. 1-11
Chapter 2 ...........................................................................................................................2-1
General Description..........................................................................................................2-1
STANDARD FEATURES............................................................................................................2-2
How the Operating System Sees the CPU Modules.....................................................................2-5
How CPU modules appear on Device Manager.......................................................................2-5
How CPU modules appear on Task Manager ..........................................................................2-6
NAMES AND FUNCTIONS OF COMPONENTS.....................................................................2-7
Front View ...............................................................................................................................2-8
Rear View..............................................................................................................................2-10
DVD-ROM drive...................................................................................................................2-12
CPU/IO Module.....................................................................................................................2-13
Mother Board.........................................................................................................................2-14
LEDs......................................................................................................................................2-15
BASIC OPERATION.................................................................................................................2-18
Installing/removing the front bezel........................................................................................2-18
Power ON ..............................................................................................................................2-19
Power OFF.............................................................................................................................2-20
POST Check ..........................................................................................................................2-20
Floppy Disk Drive (Option)...................................................................................................2-23
DVD-ROM drive...................................................................................................................2-25
Chapter 3 ...........................................................................................................................3-1
Windows Setup and Operation .......................................................................................3-1
DISK OPERATIONS...................................................................................................................3-2
Disk Operations Using the RDR (Rapid Disk Resync) Function ............................................3-2
Replacing Failed Hard Disk Drives .......................................................................................3-16
CHANGE DRIVE LETTER......................................................................................................3-19
DUAL LAN CONFIGURATION ..............................................................................................3-20
Overview................................................................................................................................3-20
Rules of Dual Configuration on Fault Tolerant Server series ................................................3-20
Configuring Dual LAN..........................................................................................................3-21
Removing Dual LAN.............................................................................................................3-25
CHECK THE DUPLICATING OPERATION OF MODULES.................................................3-26
Evaluate Startup and Stop of PCI Modules............................................................................3-26
Evaluate Start and Stop of CPU Modules..............................................................................3-29
Fault Tolerant Server series SERVICE PROGRAM CONFIGURATION.................................3-31
Chapter 4 ...........................................................................................................................4-1