NEC Univerge SV8100 Owner's manual

Programming Manual
INT-2041
Issue 11.0
(Version 9000)
®

NEC Corporation of America reserves the right to change the specifications, functions, or features at
any time without notice.
NEC Corporation of America has prepared this document for use by its employees and customers.
The information contained herein is the property of NEC Corporation of America and shall not be
reproduced without prior written approval of NEC Corporation of America.
Dterm is a registered trademark of NEC Corporation. UNIVERGE is a registered trademark of NEC
Corporation. Windows is a registered trademark of Microsoft Corporation.
Copyright 2013
NEC Corporation of America
6535 N. State Highway 161
Irving, TX 75039-2402
Communications Technology Group

Preface
THIS MANUAL
The Programming Manual provides the technician with all of the necessary information for
programming the UNIVERGE SV8100 system.
Programming can be accomplished using a PC or a multiline terminal.
SUPPORTING DOCUMENTS
UNIVERGE SV8100 General Description Manual
This Manual provides general information about the system, its features, system configuration and
standards. This manual provides an overview of the UNIVERGE SV8100 system and can be used to
present information to potential customers.
UNIVERGE SV8100 System Hardware Manual
The System Hardware Manual is provided for the system installer. This manual has detailed
instructions for installing the SV8100 chassis, blades, multiline terminals, and optional equipment.
UNIVERGE SV8100 Features and Specifications Manual
This manual provides detailed information for each of the system features. If you are not familiar with
the features, the Table of Contents lists each of the features and where to find the feature within the
manual.
UNIVERGE SV8100 Networking Manual
This manual provides information on networking the SV8100 using K-CCIS, IP K-CCIS, and NetLink.
UNIVERGE SV8100 PC Programming Manual
This manual provides information on installing and using the application that allows programming the
SV8100 system via a computer.