NEC S4900 Installation guide

iii
NEC S-Series Storage
S4900 / S2900 / S2500 / S1500

The growing volume of data has a tremendous impact
on all facets of a business from the enterprise to the
workgroup. That is why it is essential to have storage
products that increase data efficiency, provide full
availability and allow the business to realize an
extremely low cost of ownership. To meet this require-
ment, NEC provides a full range of storage products
— from the NEC Storage S4900, which is a high end
storage system with advanced crossbar technology to
an entry-level model that is very cost-effective. These
products provide for high-performance and function
including 4Gbps FC host interface and low cost
backup/archive with mixture of high-perfor-mance FC
and low cost SATA disk drives*1. These functions are
maintained by a very functional series of NEC storage
management and control software. NEC S-Series
Storage opens the path to a new IT environment.
*1: NEC Storage S2900, NEC Storage S2500, NEC Storage S1500
NEC Storage S4900
High-end model
2
NEC S-Series Storage meets the most
advanced requirements for data storage
from small to large enterprises.

PERFORMANCE
NEC S-Series Storage
NEC Storage S2900
Mid-high-range model
NEC Storage S2500
Mid-range model
NEC Storage S1500
Low-end model
3
S1500
Large-scale data centers
Large-scale core business operations
ISP/ASP/iDC
Mid-scale core business operations
Disaster prevention/backup
Small-scale core business operations
Small-scale department servers
CAD/CG data
Workgroup
Backup
Archive
•
•
•
•
•
•
•
•
•
•
•
S2500
S2900
S4900
PRICE

4
■ Ultra high-performance
with ultra high availability
Using ultra high speed cross bar technology connecting cache
function and node function the NEC S Series storage provides
for end-to-end performance and availability. The S4900 has a
bandwidth of 192GB/s which allows for high-speed access to
data even with many servers attached. Redundancy provides for
full data availability even in the event of a component failure.
■ Cache redundancy
prevents response degradation
The cache for the S4900 has two sets of mirrored cache. The
redundancy permits cache writes even in the event of a cache
failure. This provides for safe and high-speed response.
vin the case of S4900
■ Equipped with 4Gbps FC host interface
Maximum bandwidth of 400MB/s with 4Gbps FC host interface
allows high speed response even with many servers connected.
■ RAID 6 substantially increases availability
As the capacity of disk drives increase, it takes substantially
longer to re-build data in the event of a disk drive failure. Using
RAID 6, which utilizes dual parity, this is minimized and can
also accommodate two drive failures without any loss of data
availability.
■ Virtual capacity management
The Dynamic Pool function allows LUN capacity to be expanded
or reduced in a RAID 6 environment without disruption to the
application. *1: Expansion by 6 or 10 HDDs for S4900
*1: HA: Host Adapter *2: DA: Disk Adapter vin the case of S4900
Advanced Technologies
Excellent Management and Operational Functions

5
■ Phoenix technology to prevent
business operations being interrupted
This technology first isolates the disk drive where a response
delay has occurred, and automatically checks this isolated
disk drive. If no problem is found, the isolated disk is restored
to the original RAID configuration, minimizing the chance of
switching to the hot spare disk. This technology also minimizes
the delay in accessing from a server, because a disk drive where
a response delay occurs is isolated temporarily, and other disk
data in the RAID is used to continue processing.
■ Replication functions
NEC S Series storage can satisfy a variety of needs including
high-speed disk backup as well as low-cost backup with its full
suite of replication functions.
■ Low-cost backup/archive by
mixture of FC/SATA disk drives
S2900/S2500/S1500 supports large capacity, low cost SATA
disk drives as well as FC disk drives. FC disk drives for core
business operations which require non-stop operation and high
performance, and SATA disk drives for backup which requires
large capacity and low cost. Both kinds of disk drives can be
installed in a single disk array unit.
■ Security access control
Access to individual logical disks can be controlled. Write
access can be restricted from any server providing for complete
security and integrity of data.
Advanced Technologies

6
For the new area of core business operations and net-business that require uninterrupted,
high-reliability, high-speed systems. Equipped with state-of-the-art technologies, including NEC’s
independently developed “crossbar technology.”
*1: 96 hours with 8 to 64 GB cache memory, 72 hours with 80 to 128 GB cache memory. *2: Value obtained by calculation using 1 GB = 1,000,000,000B. *3: With seven expanded cabinets with the
same disk drives and RAID configurations linked together. *4: RAID-6 (4+PQ) configuration for minimum capacity, RAID-6 (8+PQ) configuration for other capacity. *5: There are some restrictions on
how disk drives are connected by fibre channel with these operating systems. New operating systems will be added to the list when they are supported. For more information, please feel free to
contact NEC.
The “Eco Symbol” is displayed on products that meet NEC’s environmental standards. For details
of these standards, please see the NEC website at: http://www.nec.co.jp/eco/en
High-end Model
NEC Storage S4900
Host interface Fibre channel (up to 400 MB/s)
Number of host ports 8 to 128 ports
Capacity 8 GB (effective capacity: 4 GB) to 128 GB (effective capacity: 64 GB)
Battery backup time Up to 96 hours*1
RAID level RAID-1, 5, 10, 50, 6
Disk interface Fibre channel (up to 200 MB/s)
73 GB disk drive 66.6GB
147 GB disk drive 133.1GB
300 GB disk drive 268.1GB
73 GB disk drive 10,000rpm / 15,000rpm
147 GB disk drive 10,000rpm / 15,000rpm
300 GB disk drive 10,000rpm
73 GB disk drive 282GB~63.8TB
147 GB disk drive 569GB~127.8TB
300 GB disk drive 1.1TB~257TB
Basic configuration Maximum configuration
Number of disk drives 12 to 60 (hot spares: 4) 1,200 (hot spares: 80)
Supported operating systems*5 HP-UX, Solaris, Microsoft®Windows®2000 Server, Microsoft®Windows Server®2003
Red Hat Enterprise Linux, MIRACLE LINUX, AIX
Cabinet dimensions (W x D x H)*6 12 to 60 (hot spares: 4) 1,200 (hot spares: 80)
Weight 882 lbs. 10,340 lbs.
Power requirements AC200~240V Single phase 50 / 60Hz
Power consumption 5.4kW 31.4kW
Cache memory
Disk drive
specification
Capacity*2
(Formatted)
Rotational
speed
Storage
capacity*3 *4
S4900
High-end model equipped with
state-of-the-art technologies
(up to 360TB - raw)

7
Mid-high-range Model
For the core business operations of medium-sized enterprises that require high reliability,
high-operability, and high-speed systems, and disaster contingency planning that pursues cost
effectiveness. Advanced functions of the high-end models are provided by the mid-range models.
S2900
Equipped with high-speed 4Gbps FC host interface, both
FC and SATA disk drives are installable. A mid-high-range
model, providing the functions and operability of large-sized
models economically (up to 108TB - raw)
*1: Value obtained by calculation using 1 GB = 1,000,000,000B. The capacity of each disk drive is slightly lower with RAID-6 configuration. *2: For FC HDD, RAID-1 configuration for
minimum capacity, RAID-5 configuration for maximum configuration. For mixture of FC and SATA HDD, RAID-6 (4+PQ) with SATA HDD and RAID-1 with FC 73GB HDD configura-
tion for minimum capacity, RAID-6 (8+PQ) with SATA HDD and RAID5 with FC 300 GB HDD configuration for maximum capacity. *3: There are some restrictions on how disk drives
are connected by fibre channel with these operating systems. New operating systems will be added to the list when they are supported. For more information, please feel free to
contact NEC.
NEC Storage S2900
Cabinet configuration Up to 16 disk enclosures can be connected to the disk array controller. One disk
enclosure can house up to 15 disk drives.
Host interface Fibre channel (up to 400 MB/s)
Number of host ports 8 ports
Capacity 4 GB (effective capacity: 2 GB) to 16 GB (effective capacity: 8 GB)
Battery backup time Up to 96 hours
RAID level RAID-1, 5, 10, 50, 6
Disk interface Fibre channel (up to 200 MB/s), Serial-ATA (up to 150MB/s)
73 GB disk drive 66.6GB
147 GB disk drive 133.1GB
300 GB disk drive 268.1GB
500 GB disk drive 458.3GB
73 GB disk drive 10,000rpm / 15,000rpm
147 GB disk drive 10,000rpm / 15,000rpm
300 GB disk drive 10,000rpm
500 GB disk drive 7,200rpm
73 GB disk drive 143GB~13.7TB
147 GB disk drive 285GB~27.4TB
300 GB disk drive 576GB~55.2TB
500 GB disk drive 2.1TB~84.6TB
Number of disk drives 4 to 240
Supported operating systems*3 HP-UX, Solaris, Microsoft®Windows®2000 Server, Microsoft®Windows Server®2003,
Red Hat Enterprise Linux, MIRACLE LINUX, AIX
Disk array controller 19" x 23.5" x 5.25"
Disk enclosure 19" x 23.5" x 5.25"
Disk array controller 80 lbs.
Disk enclosure 100 lbs.
Power requirements DC-48V / plus 5-15 receptacle
Power consumption 839W~8,564W
Cache memory
FC
SATA
Capacity*1
(Formatted)
FC
SATA
Disk drive
specification
FC
configuration
SATA configuration
Storage
capacity*2
Rotational
speed
Cabinet dimensions
(W x D x H)
Weight

8
For areas such as operations and other work groups that require high reliability, space-savings,
and expandable systems. By mixing FC/SATA disk drives*1, large amounts of data can be stored
cost-effectively. *1: Optional disk enclosure is required to install SATA disk drives.
S2500
Mid-range model with high-speed
4Gbps FC host interface, FC/SATA
disk drives installable, and space
saving (up to 48TB - raw)
*1: Value obtained by calculation using 1 GB = 1,000,000,000B. The capacity of each disk drive is slightly lower with RAID-6 configuration. *2: For FC HDD, RAID-1 configuration for
minimum capacity, RAID-5 configuration for maximum configuration. For mixture of FC and SATA HDD, RAID-6 (4+PQ) with SATA HDD and RAID-1 with FC 73GB HDD configura-
tion for minimum capacity, RAID-6 (8+PQ) with SATA HDD and RAID5 with FC 300 GB HDD configuration for maximum capacity. *3: There are some restrictions on how disk drives
are connected by fibre channel with these operating systems. New operating systems will be added to the list when they are supported. For more information, please feel free to
contact NEC.
Mid-range Model
NEC Storage S2500
Cabinet configuration Up to 7 disk enclosures can be connected to the disk array controller.
One disk array controller or disk enclosure can house up to 15 disk drives.
Host interface Fibre channel (up to 400 MB/s)
Number of host ports 4 ports
Capacity 4 GB (effective capacity: 2 GB) to 8 GB (effective capacity: 4 GB)
Battery backup time Up to 72 hours
RAID level RAID-0, 1, 5, 10, 50, 6
Disk interface Fibre channel (up to 200 MB/s), Serial-ATA (up to 150MB/s)
73 GB disk drive 66.6GB
147 GB disk drive 133.1GB
300 GB disk drive 268.1GB
500 GB disk drive 458.3GB
73 GB disk drive 10,000rpm / 15,000rpm
147 GB disk drive 10,000rpm / 15,000rpm
300 GB disk drive 10,000rpm
500 GB disk drive 7,200rpm
73 GB disk drive 143GB~6.8TB
147 GB disk drive 285GB~13.7TB
300 GB disk drive 576GB~27.6TB
500 GB disk drive 2.1TB~37.4TB
Number of disk drives 4 to 120
Supported operating systems*3 HP-UX, Solaris, Microsoft®Windows®2000 Server, Microsoft®Windows Server®2003,
Red Hat Enterprise Linux, MIRACLE LINUX, AIX
Disk array controller 19" x 23.5" x 5.25"
Disk enclosure 19" x 23.5" x 5.25"
Disk array controller 80 lbs.
Disk enclosure 100 lbs.
Power requirements DC-48V / plus 5-15 receptacle
Power consumption 680~4,285W
Cache memory
FC
SATA
Capacity*1
(Formatted)
FC
SATA
Disk drive
specification
FC
configuration
SATA configuration
Storage
capacity*2
Cabinet dimensions
(W x D x H)
Rotational
speed
Weight

9
S1500
Low-end model with high-speed
4Gbps FC host interface, FC/SATA
disk drives installable, and excellent
price performance (up to 27TB - raw)
*1: Value obtained by calculation using 1 GB = 1,000,000,000B. The capacity of each disk drive is slightly lower with RAID-6 configuration. *2: For FC HDD, RAID-1 configuration for
minimum capacity, RAID-5 configuration for maximum configuration. For mixture of FC and SATA HDD, RAID-6 (4+PQ) with SATA HDD and RAID-1 with FC 73GB HDD configura-
tion for minimum capacity, RAID-6 (8+PQ) with SATA HDD and RAID5 with FC 300 GB HDD configuration for maximum capacity. *3: There are some restrictions on how disk drives
are connected by fibre channel with these operating systems. New operating systems will be added to the list when they are supported. For more information, please feel free to
contact NEC.
Low-end model for departmental operations and work groups. By mixing FC/SATA disk drives*1, large
amounts of data can be stored cost-effectively. *1: Optional disk enclosure is required to install SATA disk drives.
Low-end Model
NEC Storage S1500
Cabinet configuration Up to 3 disk enclosures can be connected to the disk array controller.
One disk array controller or disk enclosure can house up to 15 disk drives.
Host interface Fibre channel (up to 400 MB/s)
Number of host ports 4 ports
Capacity 2 GB (effective capacity: 1 GB) to 4 GB (effective capacity: 2 GB)
Battery backup time Up to 72 hours
RAID level RAID-0, 1, 5, 10, 50, 6
Disk interface Fibre channel (up to 200 MB/s), Serial-ATA (up to 150MB/s)
73 GB disk drive 66.6GB
147 GB disk drive 133.1GB
300 GB disk drive 268.1GB
500 GB disk drive 458.3GB
73 GB disk drive 10,000rpm / 15,000rpm
147 GB disk drive 10,000rpm / 15,000rpm
300 GB disk drive 10,000rpm
500 GB disk drive 7,200rpm
73 GB disk drive 71.6GB~3.4TB
147 GB disk drive 142GB~6.8TB
300 GB disk drive 288GB~13.8TB
500 GB disk drive 2.0TB~21.1TB
Number of disk drives 3 to 60
Supported operating systems*3 HP-UX, Solaris, Microsoft®Windows®2000 Server, Microsoft®Windows Server®2003,
Red Hat Enterprise Linux, MIRACLE LINUX, AIX
Disk array controller 19" x 23.5" x 5.25"
Disk enclosure 19" x 23.5" x 5.25"
Disk array controller 80 lbs.
Disk enclosure 100 lbs.
Power requirements DC-48V / plus 5-15 receptacle
Power consumption 590~2,135W
Cache memory
SATA
Capacity*1
(Formatted)
FC
Disk drive
specification
FC
configuration
SATA configuration
Cabinet dimensions
(W x D x H)
Weight
SATA
FC
Rotational
speed
Storage
capacity*2

10
Business operations can be managed
in a single way across the system.
NEC Storage S Series
·Message cooperation
·NEC Storage Manager can be activated
from the integrated viewer screen (launcher function).
Cooperation
System administrator
NEC Storage Manager
The operating status and messages for
the system as a whole can be monitored
using the integrated viewer.
Servers
T
ape
device
Effects of use (example)
Online data
Replication
Before use
After use
Replication
Two copies can be created at the same time.
n
o
i
t
a
re
po
en
i
ln
O
no
it
a
re
p
o
en
i
l
nO Backup Batch
Backup
Batch
Online operation
Concurrent processing
Online operation
Stop online
Data replication
·
NEC Storage DynamicDataReplication
·
NEC Storage RemoteDataReplication
·
NEC Storage DynamicSnapVolume
hc
t
a
BenilnO Backup
NEC provides software products to meet
a diverse range of customer needs.
Storage Management
Device Management
Performance Management
Storage Control
Replication
Disaster Recovery
Resource Control
High Availability
STORAGE SOFTWARE
As IT systems store more and more data every year, it is
becoming more important to operate and manage data
efficiently. Storage Management Software provides a group of
integrated operation management products to perform total
management of storage systems. It provides more efficient
storage operation management by supporting management
tasks including fault and performance monitoring and making
backups in a unified way, decreasing the TCO (Total Cost of
Ownership).
Storage Management
Device Management
The NEC Storage Manager keeps track of the status,
configuration, and conditions of the disk arrays. These functions
are tightly integrated with operation management software,
making total system management possible.
Performance Management
Storage Management Software provides management
information about the performance and capacity of disk arrays,
making efficient storage management possible.
NEC Storage Manager
Software