Nedlands Group POWER-LITE CDL12W-NW User manual

“ The light source of this luminaire is not replaceable; when the light source reaches its end of lift, the whole luminaire shall be replaced”
Dimension (unit: mm)
- Read through this manual before installation.
- Handle the product with care.
- The product belongs to Class I.If necessary, please connect the ground line to the plug screw.
- This product must be installed and maintained by certified electrician.
- Consult with the manufacturer before maintenance.
- Turn OFF the power before installation and maintenance.
- Make sure the products are securely installed.
- The housing might become hot after operation.
- Primary use high-bay luminaires for commercial and industrial buildings.
- Make sure the construction is strong enough to support the products.
- The product will automatically shut down once the temperature goes too high; and will automatically turn on once it cools down.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
41
LED Shop Downlight
- For non replacable lightsources:
68
58
68
DLA1-8Sxx : 8inches
DLA1-6Sxx : 6inches
(Built-in Drive)
.
4
LED Sho
DLA1-8Sxx : 8inches
DLA1-6Sxx : 6inche
φ115
55
66
62

Wiring diagram
AC220-240V 50/60Hz
23
Cut hole size
3. Properly connected to the electric power box. as shown in picture.
OFF
NOTES
3. Specifications are subject to change without notice.
ON
POWER
POWER
AC200-240V
3 inchs Φ90-95 mm
8 inchs Φ200-210 mm