Nerf Vortex Pyragon User manual

CLEARING A JAM
®*
YouTube and the YouTube logo are
trademarks of Google Inc.
®* and/or TM* & © 2012 Hasbro. All
Rights Reserved. TM & ® denote U.S.
Trademarks.
U.S. Pat. Pend., BR, CN & EC Reg.
Des. Apps.
Product and colors
may vary.
A0092
PN 7278330000
AGES 8+
Be sure to read and follow all
instructions carefully before using
this product.
Do not aim at eyes or
face. TO AVOID INJURY:
Use only discs designed
for this product. Do not
modify discs or disc
blaster.
CAUTION:
Press and hold the DISC EJECT SWITCH
backward.
1
2
3
Point the
blaster at the
ground. The
jammed disc
will fall out.
Remove the 40-DISC DRUM following the
loading instructions.
Push down the DRUM RELEASE LEVER and pull
out the 40-DISC DRUM.
Repeat loading steps above to reload.
If the blaster is loaded but will not fire,
it may be jammed.
TO REMOVE 40-DISC DRUM
A00920000_Nerf Vortex Pyragon Blaster_US
16,Mar12 Piguet T3-5-20 HB A0092_Nerf_VT_Pyragon_Inst op MacXS 09 vc175 Epson PMS382 Black
A0092_Nerf_VT_Pyragon_Inst op.indd 1 16/3/12 9:35 AM

12
3 4
Single-Fire Mode:
SLAM FIRE®* Mode:
Push the CARTRIDGE ADVANCE LEVER all the
way clockwise, then release.
Repeat steps 1 and 2 until the CARTRIDGE
ADVANCE LEVER no longer moves.
The 40-DISC DRUM should slide easily
into place. It only fits in one direction. Do
not force it.
NOTE: Be sure to slide SLAM FIRE®* HANDLE
all the way back and all the way forward to
prevent damaging DISCS.
Make sure the NERF®*
logo is facing up. Do
not load discs upside
down.
NOTE:
Hold TRIGGER down (A) and rapidly slide
SLAM FIRE®* HANDLE back and forward
repeatedly (B).
LOADING FIRING
One at a time, load DISCS into the
40-DISC DRUM until no more will fit.
Do not load DISCS upside down.
A00920000_Nerf Vortex Pyragon Blaster_US
16,Mar12 Piguet T3-5-20 HB A0092_Nerf_VT_Pyragon_Inst op MacXS 09 vc175 Epson PMS382 Black
A0092_Nerf_VT_Pyragon_Inst op.indd 2 16/3/12 9:35 AM