NetComm NB604N Specification sheet

GET STARTED
TM
1. Connect one end of the RJ-45 Ethernet cable to one of the LAN ports and the other end to
your computer. Skip to Step 3 if you have Naked ADSL2+
2. If you have Traditional ADSL/ADSL2+ - connect the Plain Old Telephone Service (POTS)
pass-through line:
• Connect the telephone wall socket to the Line port on the in-line splitter.
• Connect one end of an RJ11 (telephone) cable to the Phone port of the in-line splitter
and the other end to the DSL port on the modem.
3. Connect one end of the RJ-11 (telephone) cable to the DSL port on the back of the modem
router and the other end to the ADSL wall socket.
4. Connect the power adaptor to your modem router and press the power button to turn the
modem router on.
For wireless setup, please refer to Page 2
1
Connecting Your Modem – Netcomm NB604N
If you got your modem from MyNetFone, then all you need to do is plug it in by following the
steps below:
Wireless Antennas
ADSL Line In Factory
Reset
Button
Up to 4
Computers
12V DC 1.5A
Power Supply
USB Port for
external
hard drive
Power
Button

1. Open a web browser (e.g. Internet Explorer, Firefox, Safari, etc) and type in 192.168.1.1
into the address bar.
2. You will be prompted to enter a username and password.
• Username: admin
• Password: admin
Note: To maintain the security of your modem, we advise that you change your login details.
Please see Pg. 4 for instructions.
3. Click on ‘Login’ and this will take you to your web configuration page. Click on ‘Wireless’
on the left hand menu.
4. Tick ‘Enable Wireless’.
5. Then enter your desired unique Network Name (SSID) to identify your wireless network.
Click ‘Apply/Save’.
Netcomm NB604N
Wireless Setup
TM
2

6. Click ‘Security’ on the left hand menu.
7. Select ‘Mixed WPA2/WPA-PSK’ for wireless security.
8. Enter your desired unique password for WPA/WAPI Passphrase. Please keep this
password in a safe place as anyone with access to it will be able to gain access to your
private network.
TIP: Enhance your password security by devising a password of at least 8 characters long using
a combination of alphabets and numbers.
9. Click ‘Apply/Save’.
10. Congratulations, your wireless connection has successfully been setup!
For security reasons, we advise you to disable your wireless LAN when not in use for a long
period of time and to ensure that security is always enabled.
Netcomm NB604N
Wireless Setup
TM
3

Netcomm NB604N
Internet Security
TM
Ensure your internet connection remains secure:
1. Do not enable remote access.
2. Change wireless password from default.
3. Change Admin password from default. (See instructions below).
Change Your Default Admin Password
4
1. Open a web browser (e.g. Internet Explorer, Firefox, Safari, etc) and type in 192.168.1.1
into the address bar.
2. You will be prompted to enter a username and password.
• Username: admin
• Password: admin
3. Click on ‘Login’ and this will take you to your web configuration page. Click on ‘Management’
on the left hand menu.
4. Select ‘Access Control’ and then ‘Passwords’ on the left hand menu. This page will allow
you to change the username and password for your modem.
5. To change the default settings, please enter your desired New Username and New
Password in the fields above.
6. Click ‘Apply’ to save your new login details.
For more information visit: www.mynetfone.com.au/support/internetsecurity