NetComm NF15ACV User manual

QUICK START GUIDE
NetCommWireless
NF15ACV
VDSL / ADSL Dual Band AC1200
WiFi Gigabit Modem Router
with Voice
QSG-00086 rev1 NF15ACV.indd 1 22/12/2015 10:28 am

VDSL / ADSL Dual Band AC1200 WiFi Gigabit Modem Router with Voice - NF15ACV
WELCOME
Thank you for choosing a NetComm Wireless VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem
Router with Voice. This guide is designed to get you up and running quickly with your new router. More
advanced conguration instructions can be found in the user guide which can be downloaded from
www.netcommwireless.com
PACKAGE CONTENTS
This package includes:
VDSL/ADSL Dual Band AC1200 WiFi
Gigabit Modem Router with Voice
(NF15ACV)
WiFi security card RJ45 Ethernet cable
RJ11 Telephone cable
Quick Start Guide
Power supply (12V/1.5A)
Warranty card
2.4GHz - 2.4GHz -
5GHz - 5GHz -
If any of these items are missing or damaged, please contact your retailer or distributor.
QSG-00086 rev1 NF15ACV.indd 2 22/12/2015 10:29 am

VDSL / ADSL Dual Band AC1200 WiFi Gigabit Modem Router with Voice - NF15ACV
SETUP YOUR ROUTER
1. Connect the included power adapter to the power socket on the rear of the router then connect the
other end of it to a wall power outlet.
2. Connect your internet service to the router.
DSL connections
a. Attach one end of the included Telephone cable to the DSL port on the back of the router. Attach
the other end to the telephone wall socket.
DSL WAN
2
On
Off
Tel 1
12VDC 1.5Amp
1 2 3 4Eth
DSL WAN 2
On
Off
Tel 1
12VDC 1.5Amp
1 2 3 4Eth
QSG-00086 rev1 NF15ACV.indd 3 22/12/2015 10:29 am

VDSL / ADSL Dual Band AC1200 WiFi Gigabit Modem Router with Voice - NF15ACV
DSL WAN 2
On
Off
Tel 1
12VDC 1.5Amp
1 2 3 4Eth
WAN/Fixed line connections (such as NBN/UFB)
b. Attach one end of the included Ethernet cable to the blue WAN port on the back of the router.
Attach the other end to your xed line modem.
QSG-00086 rev1 NF15ACV.indd 4 22/12/2015 10:29 am

VDSL / ADSL Dual Band AC1200 WiFi Gigabit Modem Router with Voice - NF15ACV
CONNECTING VIA AN ETHERNET CABLE
If you want to connect your computer to the router via Ethernet cable, follow these instructions.
1. Connect an Ethernet cable to one of the yellow LAN ports on the back of the NF15ACV router.
2. Connect the other end of the Ethernet cable to your computer.
NOTE: There is only one Ethernet cable supplied. If you require more than one Ethernet cable, any
standard Ethernet cable is suitable.
CONNECTING VIA WIFI
1. Ensure WiFi is enabled on your device (e.g. computer/smartphone/gaming console).
2. Scan for wireless networks in your area and connect to the network name that matches the
Wireless Network Name found on the Wireless Security Card (included in the box).
3. When prompted for your wireless security settings, enter the Wireless Security Key listed on your
Wireless Security Card.
DSL WAN 2
On
Off
Tel 1
12VDC 1.5Amp
1 2 3 4Eth
QSG-00086 rev1 NF15ACV.indd 5 22/12/2015 10:29 am

VDSL / ADSL Dual Band AC1200 WiFi Gigabit Modem Router with Voice - NF15ACV
CONNECTING THE ROUTER TO THE INTERNET
These steps guide you through conguring an Ethernet WAN connection. To congure a Mobile
Broadband connection, please refer to the product User Guide available at www.netcommwireless.com
1. After you have established a connection to the router using the previous steps, open your web
browser and type http://192.168.20.1 into the address bar at the top of the web browser window
and press Enter.
2. Enter admin into both the Username and Password elds and click OK.
The Status page is displayed.
3. From the menu on the left side of the screen, select the Wizard item.
The Wizard is displayed.
QSG-00086 rev1 NF15ACV.indd 6 22/12/2015 10:29 am

VDSL / ADSL Dual Band AC1200 WiFi Gigabit Modem Router with Voice - NF15ACV
4. From the WAN Interface drop down list, select your internet connection type.
5. Enter the details in the remaining elds as required by your ISP. If you do not have the details
required, contact your ISP.
6. By default, the 2.4GHz WiFi radio is turned on and the SSID (network name) is being broadcast.
This means it is discoverable by wireless client devices when they perform a scan of nearby access
points on the 2.4GHz spectrum. Use this page of the wizard to enable or disable the 2.4GHz WiFi
radio and SSID Broadcast status or change the SSID name, Encryption type and the Pre-Shared
Key. When you have nished, click the Next button.
QSG-00086 rev1 NF15ACV.indd 7 22/12/2015 10:29 am

QSG-00086 rev1
7. By default, the 5GHz WiFi radio is turned on and the SSID (network name) is being broadcast. This
means it is discoverable by wireless client devices when they perform a scan of nearby access
points on 5GHz spectrum. Use this page of the wizard to enable or disable the 5GHz WiFi radio and
SSID Broadcast status or change the SSID name, Security key type and the Security key. When you
have nished, click the Next button.
8. This page allows you to congure the “administrator” and “user” passwords used to access the
conguration pages. We highly recommend that you change the password from the default setting
to protect your router from unauthorized access. From the User Name drop down list, select the
admin or user account then enter the old password and new passwords in the respective elds.
When you have nished, click the Submit button.
A pop-up message is displayed informing you that the router must be rebooted for the changes to
take effect.
9. Click the OK button. The router reboots with the new settings and connects to the internet using the
settings you specied.
QSG-00086 rev1 NF15ACV.indd 8 22/12/2015 10:29 am