NetComm N3G005W User manual

N3G005W – Quick Install Guide
Let’s get started >
1. Attach Aerial to the unit.
Hardware Installation
3. Attach Power Supply
2.1. Attach 3G USB Modem 2.2. Ethernet connection

N3G005W – Quick Install Guide
Connecting your device
1. With the supplied Ethernet cable, connect your
computer to the LAN port of the N3G005W.
2. Connect a compatible 3G USB modem to the
socket labelled USB on the back of the N3G005W.
3. Connect the supplied Power Adapter to the wall
power outlet and to the socket labelled Power on
the N3G005W.
4. Wait for 2 minutes to allow the N3G005W to
power up.
5. On your computer, open a web-browser (such as
Internet Explorer, Firefox, or Safari) and type in
192.168.123.254 into the address bar.
6. Press enter to launch the web-based configuration
screen. Enter the default password admin in to
the system password field, and press Login.
7. Select Wizard and click Enter to start configuring
the N3G005W.
8. Follow the on-screen steps to complete the wizard
and click apply settings.
9. Wait 2 minutes to allow the N3G005W to apply
the settings, and then re-login to the device
following the steps above, in order to check the
internet link status.
Establishing a Wireless Connection:
You can connect multiple wireless devices, including
laptops, desktops and PDA’s to your N3G005W by
following the 2 basic steps.
1. Using your wireless device, scan the wireless
networks in your area and select the network
called NetComm n3g series, then click connect.
2. Enter the following default security key:
a1b2c3d4e5
Note To ensure wireless security, we recommend you change
the default settings through the Configuration Interface. For
more detail, please consult the User Guide.