NetComm N3G007W User manual

Changing the Default Administration Password
(N3G007W)

Changing the default administration page password
Changing the default password (and username) * allows you to prevent unauthorised access to the
administration page of your modem router VOIP ATA.
Technical Support are unable to obtain your username and password.
If you forget your administration page login details, you will need to perform a
factory reset to restore the default username and password of admin.
This will also clear any stored settings on your modem router VOIP ATA.
*
- If supported by your model of modem router.

Changing the default password
This guide will take you through the process of changing the password required to login to the
administration page of your modem router VOIP ATA.
1. Navigate to http: 192.168.123.254 in a web browser.
2. Enter “admin” as the system password and press the Login button.
3. Select the Advanced Setup option.

4. Select “Basic Setting” from the top menu and then “Change Password” from the
sub-menu at the left hand side of the screen.

5. Enter the current administration password into the “Old Password” field.
6. Enter the new password into the “New Password” field and again into the
“Reconfirm” field.
7. Press the Save button
Remember to use the new password you have just entered the next time you log in to the
router.