NetComm NB6PLUS4WN User manual

IPTV Setup
(NB6Plus4Wn)

IPTV
This guide will take you through the process of configuring a VL N on your modem /
router to work with IPTV.*
1. Navigate to http://192.168.1.1 in a web browser.
2. Enter 'admin' for both the username and password and click Ok.

3. Select Advanced > Internet > Connections.
4. Press the Add button on the right hand side of the screen.

5. Enter 0 into the VPI field and 35 into the VCI field with UBR without PCR as the
Service Category.
6. Press the Next button.

7. Select Bridging as the connection type protocol with LLC/SN P as the encapsulation
type. Quality of Service (QoS) is recommended. 802.1Q VL N Tagging is optional and
not required for the IPTV service.
8. Press the Next button.

9. Leave the W N IP Settings as default 'none' unless otherwise specified by your IPTV
provider.
10. Press the Next button.

11. Ensure 'Enable this Internet Connection' is selected. You may change the
connection name to something descriptive such as IPTV if you would prefer it.
12. Press the Apply button.
Your NB6Plus4Wn is now configured for IPTV.