NETGEAR WAG102 - ProSafe Dual Band Wireless Access... User manual

Wireless
Adapter
WAG311
Wireless
Adapter
WAG511
10/100 NIC FA311
10/100 NIC FA511
ProSafe Network
Management Software NMS100
Gigabit NIC
GA311
ProSafe 24+2 10/100
Smart Switch w/PoE
FS726TP
ProSafe Gigabit
VPN Firewall 25
FVS124G
Broadband
Modem
Internet
Optional
Second
Modem
ProSafe VPN Client Software
VPN01L
ProSafe Dual Band Access Point
WAG102
Connected to
ProSafe Indoor Omni-Directional
Antenna ANT2405
WAG102
ProSafe™ Dual Band Wireless Access Point
Intelligent Networking Features for a Scalable, Secure Solution
NETGEAR’s ProSafe Dual Band Wireless Access Point WAG102 delivers the secure, reliable,
high performance wireless local area networks (WLANs) today's mobile workforce demands.
The WAG102 Access Point supports both 5 GHz and 2.4 GHz 54 Mbps radio transmission
with up to 108 Mbps in both 802.11g and 802.11a in turbo mode. It supports up to 128
simultaneous wireless clients and client types within the same coverage area. WAG102 brings
standards-based enterprise-level functionality at a mid-market price with features such as robust
security measures, simplified management and configuration, integrated IEEE 802.3af power
over Ethernet (PoE), and Wi-Fi certification. Supports Simple Network Management Protocol
(SNMP) and is optimized for NETGEAR ProSafe Network Management Software NMS100.
Complies with industry security standards for wireless data encryption, and user authorization.
It provides support for WPA2 and 802.1x to enable strong mutual authentication to ensure only
legitimate clients have access to the network. 802.11i, WPA2 Enterprise provides enhanced, interoperable
wireless networking security. Supports MAC address authentication with 256-user Access Control
Lists (ACL) and VPN pass-through.
Cost effective, simple to install and use. Wi-Fi Certified and plenum rated—appropriate for placement
above drop-down ceilings and under raised floors. Equipped with convenient Smart Wizard™
browser-based interface. Fitted with two powerful detachable 5 dBi antennas and compatible
with NETGEAR’s ProSafe 2.4 GHz antennas for expanded wireless capacity and range. Protected
with a NETGEAR 3-year warranty. WAG102 includes the embedded IEEE 802.3af Power over
Ethernet (PoE) port which expands installation options by eliminating the need to locate the
WAG102 near a power outlet.
WAG102 will be integrated with radio frequency (RF) management technology, where the
wireless network self optimizes by intelligently choosing channels and dynamically adjusting the
power levels to ensure coverage and avoid interference. This feature will be available as an update
in a future release.
•Help is there when you need it!
NETGEAR provides 24x7
technical support* in English,
with selected local language
support during office hours.
Secure
Versatile
Dynamic

Product Specifications
• Wireless:
-Standard: IEEE 802.11a up to 108 Mbps; 802.11g up to
108 Mbps Wireless Access Point
-Antennas: Tw o ( 2 ) detachable antennas:
(1) 5 dBi, 2.4 GHz and (1) 5 dBi 5 GHz
• Physical Interfaces:
-LAN Port: One (1) 10/100BASE-T Ethernet (RJ-45) port
with Auto Uplink™(Auto MDI-X) with IEEE 802.3af
Power over Ethernet (PoE) support
-Power adapter: 12 VDC, 1.0A power supply; plug is
localized to country of sale.
-Six (6) LEDs: Power, Test, 100 Mbps, Link/ACT, and
WLAN 802.11g
-Antenna Connector: Tw o (2) reverse SMA antenna
connectors
• Network Management:
-Remote configuration and management through Web
browser, SNMP
-SNMP management supports SNMP MIB I, MIB II,
and 802.11 MIB
• Advanced Wireless Features:
-Point-to-point wireless bridge mode
-Point-to-multipoint wireless bridge mode
-Repeater mode
-Adjustable Transmit Power Control (TPC) from
100 mW down to 0 mW
-RF Management functionality including auto power
transmission, channel selection (Future firmware upgrade)
• Typical Maximum Power Output:
-802.11b mode, 1 to 11 Mbps + 19 dBm
-802.11g mode, 6 to 24 Mbps + 18 dBm
-802.11g mode, 36, 48 and 54 Mbps + 17/16/16 dBm
Note: Maximum Tx varies based on country and/or region selection
to ensure local regulatory compliance.
• Receive Sensitivity:
-802.11b
2 Mbps -94 dBm
5.5 Mbps -92 dBm
11 Mbps -90 dBm
-802.11g
6 Mbps - 91 dBm
9 Mbps - 91 dBm
12 Mbps - 90 dBm
18 Mbps - 87 dBm
24 Mbps - 85 dBm
36 Mbps - 80 dBm
48 Mbps - 75 dBm
54 Mbps - 70 dBm
-802.11a
6 Mbps - 92 dBm
9 Mbps - 91 dBm
12 Mbps - 90 dBm
18 Mbps - 86 dBm
24 Mbps - 84 dBm
36 Mbps - 79 dBm
48 Mbps - 72 dBm
54 Mbps - 70 dBm
• Power Over Ethernet Required:
-4.3 W
• Security:
-40/64-, 128-, and 152-bit WEP encryption
-Block SSID Broadcast
-VPN pass-through support
-MAC address filtering with access control lists –
up to 256 users
-802.1x RADIUS support with EAP TLS, TTLS, PEAP
-Wi-Fi Protected Access (WPA2)
-Secure Socket Layer (SSL) remote management login
• Standards, Safety and Electromagnetic
Conformance:
-IEEE 802.11g (2.4 GHz Frequency Band, DSSS
Modulation Type)
-IEEE 802.3af Power over Ethernet (PoE)
-FCC Part 15 Subpart B and Subpart C
-CE EN 60950-1 (2001), EN 301 489-17 V1.2.1
(2002), EN 301 489-1 V1.4.1 (2002), EN 300 328-1
(2001-12), EN 300 328-2 (2001-12), R&TTE
Directive
-99/5/EC, CSIPR22(B), AS/NZS 3548 (B)
-Plenum Rated
-IEEE 802.11g (2.4 GHz Frequency Band, DSSS
Modulation Type)
-IEEE 802.11a
-IEEE 802.3af Power over Ethernet (PoE)
-FCC Part 15 Subpart B , Subpart C and E
-C-Tick: AS/NZ 3548 Class B
-CE EN 60950-1 (2001), EN 301 489-17 V1.2.1
(2002-08), EN 301 489-1 V1.4.1 (2002-08), EN 300
328-1 (2001-12), EN 300 328-2 (2003--4),
EN301893(5GHz),EN60601, R&TTE Directive
99/5/EC
• Physical Specifications:
-Dimensions (H x W x D): 32 x 190.5 x 122 mm
(1.25 x 7.5 x 4.8 in.)
-Weight: .62 kg (1.3 lb)
• Environmental Specifications:
-Operating temperature: 0 to 40° C (32 to 104° F)
-Operating humidity: 90% maximum relative
humidity, noncondensing
• Warranty:
-NETGEAR 3-year warranty
System Requirements
-Windows®98, Me, 2000 or XP
-2 MB of available disk space
Package Contents
-ProSafe Dual Band Wireless Access Point WAG102
-Tw o (2) 5 dBi Detachable Antennas
-Resource CD
-Power adapter
-Ethernet cable
-Installation guide
-Warranty/Support information card
• ProSupport Service Packs
-OnCall 24x7 PMB0331
-XPressHW PRR0331
NETGEAR Related Products
• Antennas and Accessories
-ANT24O5 ProSafe 5 dBi Indoor Omni-direc-
tional antenna
-ANT2409 ProSafe 9 dBi Indoor/Outdoor
Omni-directional Antenna
-ANT24D18 ProSafe 18 dBi Indoor/Outdoor
Directional antenna
-Five (5) antenna cable lengths: 1.5, 3, 5, 10
-WAG511 ProSafe 108 Mbps Dual Band
PC Card
-WAG311 ProSafe 108 Mbps Dual Band
PCI Adapter
-NMS100 ProSafe Network Management
Software
• Switches
-FSM7326P ProSafe 24+2 10/100 L3
Managed Switch w/24 PoE
-FS726TP ProSafe 24+2 10/100 Smart
Switch w/12 PoE
-FS116P ProSafe 16 Port 10/100 Desktop
Switch w/8 PoE
-FS108P ProSafe 8 Port 10/100 Desktop
Switch w/4 PoE
• VPN Firewalls
-FVS338 ProSafe VPN Firewall 50 with
Dial Backup
-FVS124G ProSafe Gigabit VPN
Firewall 25
-FVS114 ProSafe VPN Firewall 8
-FVS318 ProSafe VPN Firewall 8
• Access Points
-WG102 ProSafe 802.11g Wireless
Access Point
4500 Great America Parkway
Santa Clara, CA 95054 USA
Phone: 1-888-NETGEAR
E-mail: [email protected]
www.NETGEAR.com
©2005 NETGEAR, Inc. NETGEAR®,
Everybody's connecting®, the Netgear
logo, Auto Uplink, ProSafe, Smart Wizard
and RangeMax are trademarks or regis-
tered trademarks of NETGEAR, Inc. in the
United States and/or other countries.
Microsoft, Windows, and the Windows
logo are trademarks or registered
trademarks of Microsoft Corporation in
the United States and/or other countries.
Other brand and product names are
trademarks or registered trademarks of
their respective holders. Information is
subject to change without notice.
All rights reserved.
* Free basic installation support provided
for 90 days from date of purchase.
Advanced product features and
configurations are not included in free
basic installation support; optional
premium support available.
D-WAG102-01
WAG102 ProSafe™Dual Band Wireless Access Point
10 8
/5
2x