NETGEAR WN802T User manual

202-10415-01
September 2008
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
NETGEAR Wireless-N
Access Point WN802T v2
Reference Manual
(802.11bgn)

v1.0, September 2008
ii
© 2008 by NETGEAR, Inc. All rights reserved..
Technical Support
Please refer to the support information card that shipped with your product. By registering your product at
http://www.netgear.com/register, we can provide you with faster expert technical support and timely notices of product
and software upgrades.
NETGEAR, INC. Support Information
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card.
E-mail: [e-mail]
North American NETGEAR website: http://www.netgear.com
Trademarks
NETGEAR, the NETGEAR logo, ProSafe, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc.
Microsoft, Windows, Windows NT and Vista are registered trademarks of Microsoft Corporation.Other brand and
product names are registered trademarks or trademarks of their respective holders.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Certificate of the Manufacturer/Importer
It is hereby certified that the NETGEAR Wireless-N Access Point WN802T v2 has been suppressed in accordance with
the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for
example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please
refer to the notes in the operating instructions.
The Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market
and has been granted the right to test the series for compliance with the regulations.
Bestätigung des Herstellers/Importeurs
Es wird hiermit bestätigt, daß dasNETGEAR Wireless-N Access Point WN802T v2 gemäß der im BMPT-AmtsblVfg
243/1991 und Vfg 46/1992 aufgeführten Bestimmungen entstört ist. Das vorschriftsmäßige Betreiben einiger Geräte
(z.B. Testsender) kann jedoch gewissen Beschränkungen unterliegen. Lesen Sie dazu bitte die Anmerkungen in der
Betriebsanleitung.
Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt
gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu überprüfen.
Voluntary Control Council for Interference (VCCI) Statement
This equipment is in the Class B category (information equipment to be used in a residential area or an adjacent area
thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing
Equipment and Electronic Office Machines aimed at preventing radio interference in such residential areas. When used
near a radio or TV receiver, it may become the cause of radio interference. Read instructions for correct handling.

v1.0, September 2008
iii
Regulatory Compliance Information
This section includes user requirements for operating this product in accordance with National laws for usage of radio
spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result
in unlawful operation and adverse action against the end-user by the applicable National regulatory authority.
NOTE: This product's firmware limits operation to only the channels allowed in a particular Region or Country.
Therefore, all options described in this user's guide may not be available in your version of the product.
Europe – EU Declaration of Conformity
Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the
European Union (1999/5/EC). This equipment meets the following conformance standards:
EN300 328, EN301 489-17, EN60950
Europe – Declaration of Conformity in Languages of the European Community
Cesky [Czech] NETGEAR Inc. tímto prohlašuje, že tento Radiolan je ve shode se základními
požadavky a dalšími príslušnými ustanoveními smernice 1999/5/ES..
Dansk
[Danish]
Undertegnede NETGEAR Inc. erklærer herved, at følgende udstyr Radiolan overholder
de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt NETGEAR Inc., dass sich das Gerät Radiolan in Übereinstimmung mit
den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab NETGEAR Inc. seadme Radiolan vastavust direktiivi 1999/5/EÜ
põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English Hereby, NETGEAR Inc., declares that this Radiolan is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente NETGEAR Inc. declara que el Radiolan cumple con los
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la
Directiva 1999/5/CE.
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ NETGEAR Inc. ΔΗΛΩΝΕΙ ΟΤΙ Radiolan ΣΥΜΜΟΡΦΩΝΕΤΑΙ
ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ
ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
[French]
Par la présente NETGEAR Inc. déclare que l'appareil Radiolan est conforme aux
exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano [Italian] Con la presente NETGEAR Inc. dichiara che questo Radiolan è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo NETGEAR Inc. deklarē, ka Radiolan atbilst Direktīvas 1999/5/EK būtiskajām
prasībām un citiem ar to saistītajiem noteikumiem.

v1.0, September 2008
iv
FCC Requirements for Operation in the United States
FCC Information to User
This product does not contain any user serviceable components and is to be used with approved antennas only. Any
product changes or modifications will invalidate all applicable regulatory certifications and approvals
FCC Guidelines for Human Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Lietuvių
[Lithuanian]
Šiuo NETGEAR Inc. deklaruoja, kad šis Radiolan atitinka esminius reikalavimus ir kitas
1999/5/EB Direktyvos nuostatas.
Nederlands
[Dutch]
Hierbij verklaart NETGEAR Inc. dat het toestel Radiolan in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Malti [Maltese] Hawnhekk, NETGEAR Inc., jiddikjara li dan Radiolan jikkonforma mal-htigijiet
essenzjali u ma provvedimenti ohrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar
[Hungarian]
Alulírott, NETGEAR Inc. nyilatkozom, hogy a Radiolan megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski [Polish] Niniejszym NETGEAR Inc. oświadcza, że Radiolan jest zgodny z zasadniczymi
wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português
[Portuguese] NETGEAR Inc. declara que este Radiolan está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
NETGEAR Inc. izjavlja, da je ta Radiolan v skladu z bistvenimi zahtevami in ostalimi
relevantnimi določili direktive 1999/5/ES.
Slovensky
[Slovak] NETGEAR Inc. týmto vyhlasuje, _e Radiolan spĺňa základné po_iadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi
[Finnish] NETGEAR Inc. vakuuttaa täten että Radiolan tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar NETGEAR Inc. att denna Radiolan står I överensstämmelse med de
väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv
1999/5/EG.
Íslenska
[Icelandic]
Hér með lýsir NETGEAR Inc. yfir því að Radiolan er í samræmi við grunnkröfur og aðrar
kröfur, sem gerðar eru í tilskipun 1999/5/EC.
Norsk
[Norwegian] NETGEAR Inc. erklærer herved at utstyret Radiolan er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

v1.0, September 2008
v
FCC Declaration Of Conformity
We NETGEAR, Inc., 4500 Great America Parkway, Santa Clara, CA 95054, declare under our sole responsibility that
the model WN802T v2 NETGEAR Wireless-N Access Point WN802T v2 complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
FCC Radio Frequency Interference Warnings & Instructions
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following methods:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Modifications made to the product, unless expressly approved by NETGEAR, Inc., could void the user's right to operate
the equipment.
Canadian Department of Communications Radio Interference Regulations
This digital apparatus (NETGEAR Wireless-N Access Point WN802T v2) does not exceed the Class B limits for radio-
noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Canada ID: 4054A-WG111
FOR HOME OR OFFICE USE
Tested to Comply
with FCC Standards
PY308200086
NETGEAR Wireless-N Access Point WN802T v2

v1.0, September 2008
vi
Product and Publication Details
Model Number: WN802T v2
Publication Date: September 2008
Product Family: Wireless Access Point
Product Name: NETGEAR Wireless-N Access Point WN802T v2
Home or Business Product: Business
Language: English
Publication Part Number: 202-10415-01
Publication Version Number: 1.0

ix
v1.0, September 2008
Contents
About This Manual
Conventions, Formats and Scope ...................................................................................xiii
How to Use This Manual .................................................................................................xiv
How to Print this Manual ..................................................................................................xiv
Revision History ...............................................................................................................xv
Chapter 1
Introduction
About the NETGEAR Wireless-N Access Point WN802T v2 .........................................1-1
Key Features ..................................................................................................................1-1
System Requirements ....................................................................................................1-3
What is in the Box ...........................................................................................................1-3
Front Panel of the NETGEAR Wireless-N Access Point ................................................1-3
Back Panel of the NETGEAR Wireless-N Access Point .................................................1-6
NETGEAR Wireless-N Access Point Default Settings Location .....................................1-6
Chapter 2
Installation and Configuration
Wireless Equipment Placement and Range Guidelines .................................................2-1
Configuring the NETGEAR Wireless-N Access Point ....................................................2-2
Ethernet Setup .........................................................................................................2-2
Configuring Your Basic WLAN Settings ...................................................................2-3
Configuring Basic Wireless Settings ........................................................................2-7
Configuring QoS Settings .......................................................................................2-10
Configuring WMM Power Save .............................................................................. 2-11
Verifying Basic Wireless Connectivity .................................................................... 2-11
Deploying the NETGEAR Wireless-N Access Point .....................................................2-12
Configuring and Testing Your PCs for Wireless Connectivity .................................2-12
Logging in to the NETGEAR Wireless-N Access Point ..........................................2-13

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
xContents
v1.0, September 2008
Chapter 3
Wireless Security Settings
Wireless Security Options ..............................................................................................3-1
SSID and WEP/WPA Settings Setup Form ....................................................................3-5
RADIUS Server Settings ................................................................................................3-6
Configuring Wireless Security ........................................................................................3-6
Configuring WEP ......................................................................................................3-6
Configuring WPA with RADIUS ................................................................................3-8
Configuring WPA2 with RADIUS ............................................................................3-10
Configuring WPA and WPA2 with RADIUS ............................................................ 3-11
Configuring WPA-PSK ...........................................................................................3-12
Configuring WPA2-PSK .........................................................................................3-13
Configuring WPA-PSK and WPA2-PSK .................................................................3-14
Restricting Wireless Access by MAC Address .............................................................3-15
Chapter 4
Management
Changing the Administrator Password ...........................................................................4-1
Upgrading the Wireless Access Point Firmware ............................................................4-3
Configuration File Management .....................................................................................4-4
Rebooting the NETGEAR Wireless-N Access Point ......................................................4-5
Viewing the Available Wireless Stations List ..................................................................4-7
Viewing General Summary Information ..........................................................................4-8
Viewing Network Traffic Statistics ...................................................................................4-9
Configuring the Advanced Wireless Settings ............................................................... 4-11
Configuring the RADIUS Server Settings .....................................................................4-13
RADIUS Server Settings Fields ....................................................................................4-15
Chapter 5
Advanced Wireless Bridging
Configuring Wireless Multi-Point Bridging ......................................................................5-1
Configuring Repeater without Wireless Client Association .............................................5-5
Chapter 6
Troubleshooting and Help
Offline help .....................................................................................................................6-1
Troubleshooting ..............................................................................................................6-2
No lights are lit on the access point. ........................................................................6-2

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Contents xi
v1.0, September 2008
The Ethernet light is not lit. .......................................................................................6-2
The WLAN light is not lit. .........................................................................................6-2
I cannot configure the access point from a browser. ...............................................6-3
I cannot access the Internet or the LAN with a wireless capable computer. ...........6-4
When I enter a URL or IP address I get a timeout error. ..........................................6-4
Restore Factory Default Settings .............................................................................6-5
Online Help .....................................................................................................................6-5
Appendix A
Default Settings and Technical Specifications
Factory Default Settings ................................................................................................ A-1
Technical Specifications ................................................................................................. A-3
Appendix B
Related Documents
Index

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
xii Contents
v1.0, September 2008

xiii
v1.0, September 2008
About This Manual
The NETGEAR®Wireless-N Access Point WN802T v2 Reference Manual describes how to install,
configure, and troubleshoot the NETGEAR Wireless-N Access Point WN802T v2. The
information in this manual is intended for readers with intermediate computer and Internet skills.
Conventions, Formats and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
•Typographical Conventions. This manual uses the following typographical conventions
•Formats. This manual uses the following formats to highlight special messages:
Italic Emphasis, books, CDs, file and server names, extensions
Bold User input, IP addresses, GUI screen text
Fixed Command prompt, CLI text, code
italic URL links
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note may result in a malfunction or damage to the
equipment.

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
xiv About This Manual
v1.0, September 2008
•Scope. This manual is written for the NETGEAR Wireless-N Access Point according to these
specifications:
For more information about network, Internet, firewall, and VPN technologies, see the links to the
NETGEAR website in Appendix B, “Related Documents”.
How to Use This Manual
The HTML version of this manual includes the following:
• Buttons, and , for browsing forwards or backwards through the manual one page
at a time
• A button that displays the table of contents and an button. Double-click on a
link in the table of contents or index to navigate directly to where the topic is described in the
manual.
• A button to access the full NETGEAR, Inc. online Knowledge Base for the product
model.
• Links to PDF versions of the full manual and individual chapters.
How to Print this Manual
To print this manual you can select one of the following several options, according to your needs.
Danger: This is a safety warning. Failure to take heed of this notice may result in
personal injury or death.
Product Version NETGEAR Wireless-N Access Point WN802T v2
Manual Publication Date September 2008
Note: Product updates are available on the NETGEAR, Inc. website at
http://kbserver.netgear.com/products/WN802Tv2.asp.

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
About This Manual xv
v1.0, September 2008
•Printing a Page in the HTML View. Each page in the HTML version of the manual is
dedicated to a major topic. Use the Print button on the browser toolbar to print the page
contents.
•Printing a Chapter. Use the PDF of This Chapter link at the top left of any page.
– Click the PDF of This Chapter link at the top right of any page in the chapter you want to
print. The PDF version of the chapter you were viewing opens in a browser window.
– Your computer must have the free Adobe Acrobat reader installed in order to view and
print PDF files. The Acrobat reader is available on the Adobe Web site at
http://www.adobe.com.
– Click the print icon in the upper left of the window.
•Printing the Full Manual. Use the Complete PDF Manual link at the top left of any page.
– Click the Complete PDF Manual link at the top left of any page in the manual. The PDF
version of the complete manual opens in a browser window.
– Click the print icon in the upper left of the window.
Revision History
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
Part Number Version
Number Date Description
202-10415-01 1.0 September
2008
Features: MIMO, WMM/QoS; WPA2; RADIUS authentication,
Wireless Bridge and Repeater Mode

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
xvi About This Manual
v1.0, September 2008

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Introduction 1-1
v1.0, September 2008
Chapter 1
Introduction
This chapter describes some of the key features of the NETGEAR Wireless-N Access Point
WN802T v2. It also includes the minimum prerequisites for installation (“System Requirements”
on page 1-3.), package contents (“What is in the Box” on page 1-3), and a description of the front
and back panels of the WN802T v2 (“Front Panel of the NETGEAR Wireless-N Access Point” on
page 1-3).
About the NETGEAR Wireless-N Access Point WN802T v2
The NETGEAR Wireless-N Access Point WN802T v2 is the basic building block of a wireless
LAN infrastructure. It provides connectivity between Ethernet wired networks and radio-equipped
wireless notebook systems, desktop systems, print servers, and other devices.
The WN802T v2 provides wireless connectivity to multiple wireless network devices within a
fixed range or area of coverage—interacting with a wireless network interface card (NIC) via an
antenna. Typically, an individual in-building access point provides a maximum connectivity area
of about 600 feet radius. Consequently, the NETGEAR Wireless-N Access Point can support a
small group of users in a range of several hundred feet. Most access points can handle up to 32
users simultaneously.
The NETGEAR Wireless-N Access Point WN802T v2 acts as a bridge between the wired LAN
and wireless clients. Connecting multiple WN802T v2s via a wired Ethernet backbone can further
lengthen the wireless network coverage. As a mobile computing device moves out of the range of
one access point, it moves into the range of another. As a result, wireless clients can freely roam
from one Access Point to another and still maintain seamless connection to the network.
The auto-rate capability of the NETGEAR Wireless-N Access Point WN802T v2 allows packet
transmission at up to 300 Mbps, or at reduced speeds to compensate for distance or
electromagnetic interference.
Key Features
The NETGEAR Wireless-N Access Point is easy to use and provides the following features:

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
1-2 Introduction
v1.0, September 2008
•Multi-In, Multi-Out (MIMO) technology. Provides improved communication performance
without additional bandwidth or transmit power. .
•Standards Compliance. Complies with Draft 2.0 802.11n for wireless LANs, and is
backward compatible with 802.11bg.
•Full WPA and WPA2 support. WPA and WPA2 personal and enterprise-class strong security
with dynamic encryption key generation. TKIP and AES encryption are supported.
• RADIUS authentication support.
•DHCP client support. The WN802T v2 can act as a DHCP client and obtain information
from your DHCP server for the WLAN.
•Access control MAC address filtering. The access control MAC address filtering feature can
ensure that only trusted wireless stations can use the WN802T v2 to gain access to your LAN.
Local and remote MAC address authentication are supported.
•Easy-to-use web-based GUI. Aweb-based GUI makes installation and management easy for
all users.
•Auto-sensing ethernet connection with Auto-Uplink interface. Connects to 10/100/1000
Mbps IEEE 802.3 Ethernet networks.
•WMM Power Save. Allows power-critical devices to fine-tune power consumption and save
power by buffering data transmitted to them.
•Front panel LEDs. Front panel LEDs allow easy monitoring of status and activity.
•Flash memory. Allows for easy firmware upgrades.
•Quality of Service (QoS) Support. You can configure parameters that affect traffic flowing
from the wireless access point to the client station and from the client station to the wireless
access point. The QoS feature allows you to prioritize time-sensitive traffic such as voice and
video traffic.
• Three modes for maximum flexibility:
–Access Point. In this mode, operates as a standard 802.11n wireless access point.
–Wireless Multi-Point Bridging. In this mode, acts as a wireless AP or wireless bridge for
a group of bridge-mode wireless partners.
–Wireless Repeater Bridging. In this mode, operates as a wireless bridge without client
association.

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Introduction 1-3
v1.0, September 2008
System Requirements
Before installing the WN802T v2, make sure your system meets the following requirements:
• A 10/100/1000 Mbps Local Area Network device such as a hub, switch or, router.
• The Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the
package, or one like it.
• A 100-240 V, 50-60 Hz AC Switching Power Supply.
• A Web browser for configuration such as Microsoft Internet Explorer 6.0 or later, or Mozilla
Firefox 1.5 or later.
• Microsoft Windows Vista, XP, 2000, 98, Me, Mac OS, Unix, or Linux and TCP/IP (protocol)
installed.
• 802.11bgn or 802.11bg - compliant devices.
What is in the Box
The product package should contain the following items:
• NETGEAR Wireless-N Access Point WN802T v2.
• 12V, 1A Switching Power Supply.
• Vertical stand.
• Category 5 (CAT5) Ethernet cable.
•Resource CD.
•NETGEAR Wireless-N Access Point WN802T v2 Reference Manual.
• Warranty and Support Information Card.
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the Access Point for
repair.
Front Panel of the NETGEAR Wireless-N Access Point
The front panel of the NETGEAR Wireless-N Access Point houses three LEDs that display the
status of power to the wireless access point, Ethernet connectivity and whether a wireless signal is
being sent. To identify the status lights on the front panel of the WN802T v2 and verify connection
refer to Table 1-1.

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
1-4 Introduction
v1.0, September 2008
You can use the status lights on the front of the wireless access point to verify various conditions
described in the following table:
.
Figure 1-1 Front panel status LEDs
Table 1-1. Port and system LEDs
Feature Detailed Description
LAN Port LED Link/Act
Green – Giga Ethernet link is properly made
Amber – Fast Ethernet link is properly made
Sparkle – Active
Off – No Link is detected
WLAN LED Wireless Link/Act
Green– A 802.11n WLAN link is properly made
Sparkle – Network activity is occurring
Off – No Link is detected
Power/Diag Green – Power is on
Amber – System is booting up
Sparkle Amber – Firmware is upgrading
Off – Power is off
P
Power
LAN
WLAN

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Introduction 1-5
v1.0, September 2008
Back Panel of the NETGEAR Wireless-N Access Point
The back of the WN802T v2 contains the following listed items, viewed from top to bottom:
1. The Reset button, which is used to reset the WN802T v2 or restore the factory default settings.
See Appendix A, “Default Settings and Technical Specifications” for more information on
restoring the factory default settings.
2. The Ethernet port, used to establish a 10 Mbps, 100 Mbps or 1000 Mbps connection with the
network.
3. AC Universal Power Supply outlet.
NETGEAR Wireless-N Access Point Default Settings
Location
The label on the rear panel of the wireless access point contains the serial number, MAC address,
and default login information for your WN802T v2 device.
Figure 1-2 Back panel of the WN80Tv2
Reset button
Ethernet port
Power outlet

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
1-6 Introduction
v1.0, September 2008
Figure 1-3 Label on back panel