NETGEAR WNAP210 User manual

202-10474-01
March 2009
v1.0
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
ProSafe Wireless-N
Access Point WNAP210
Reference Manual

ii
v1.0 March 2009
© 2009 by NETGEAR, Inc. All rights reserved..
Technical Support
Please refer to the support information card that shipped with your product. By registering your product at 
http://www.netgear.com/register, we can provide you with faster expert technical support and timely notices of product
and software upgrades.
NETGEAR, INC. Support Information
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card.
E-mail: [e-mail]
North American NETGEAR website: http://www.netgear.com
Trademarks
NETGEAR, the NETGEAR logo, ProSafe, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc.
Microsoft, Windows, Windows NT and Vista are registered trademarks of Microsoft Corporation.Other brand and
product names are registered trademarks or trademarks of their respective holders.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Certificate of the Manufacturer/Importer
It is hereby certified that the ProSafe Wireless-N Access Point WNAP210 has been suppressed in accordance with the
conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example,
test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the
notes in the operating instructions.
The Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market
and has been granted the right to test the series for compliance with the regulations.
Bestätigung des Herstellers/Importeurs
Es wird hiermit bestätigt, daß dasProSafe Wireless-N Access Point WNAP210 gemäß der im BMPT-AmtsblVfg 243/
1991 und Vfg 46/1992 aufgeführten Bestimmungen entstört ist. Das vorschriftsmäßige Betreiben einiger Geräte (z.B.
Testsender) kann jedoch gewissen Beschränkungen unterliegen. Lesen Sie dazu bitte die Anmerkungen in der
Betriebsanleitung.
Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt
gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu überprüfen.
Voluntary Control Council for Interference (VCCI) Statement
This equipment is in the Class B category (information equipment to be used in a residential area or an adjacent area
thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing
Equipment and Electronic Office Machines aimed at preventing radio interference in such residential areas. When used
near a radio or TV receiver, it may become the cause of radio interference. Read instructions for correct handling.

Note: Delete this note and the information below for products that are not wireless.
v1.0 March 2009
iii
Regulatory Compliance Information
This section includes user requirements for operating this product in accordance with National laws for usage of radio
spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result
in unlawful operation and adverse action against the end-user by the applicable National regulatory authority.
NOTE: This product's firmware limits operation to only the channels allowed in a particular Region or Country.
Therefore, all options described in this user's guide may not be available in your version of the product.
Europe – EU Declaration of Conformity
Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the
European Union (1999/5/EC). This equipment meets the following conformance standards:
EN300 328, EN301 489-17, EN60950, EN301 893
Europe – Declaration of Conformity in Languages of the European Community
Cesky [Czech] NETGEAR Inc. tímto prohlašuje, že tento Radiolan je ve shode se základními
požadavky a dalšími príslušnými ustanoveními smernice 1999/5/ES..
Dansk
[Danish]
Undertegnede NETGEAR Inc. erklærer herved, at følgende udstyr Radiolan overholder
de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt NETGEAR Inc., dass sich das Gerät Radiolan in Übereinstimmung mit
den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab NETGEAR Inc. seadme Radiolan vastavust direktiivi 1999/5/EÜ
põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English Hereby, NETGEAR Inc., declares that this Radiolan is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente NETGEAR Inc. declara que el Radiolan cumple con los
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la
Directiva 1999/5/CE.
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ NETGEAR Inc. ΔΗΛΩΝΕΙ ΟΤΙ Radiolan ΣΥΜΜΟΡΦΩΝΕΤΑΙ
ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ
ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

v1.0 March 2009
iv
Français
[French]
Par la présente NETGEAR Inc. déclare que l'appareil Radiolan est conforme aux
exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano [Italian] Con la presente NETGEAR Inc. dichiara che questo Radiolan è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo NETGEAR Inc. deklarē, ka Radiolan atbilst Direktīvas 1999/5/EK būtiskajām
prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių
[Lithuanian]
Šiuo NETGEAR Inc. deklaruoja, kad šis Radiolan atitinka esminius reikalavimus ir kitas
1999/5/EB Direktyvos nuostatas.
Nederlands
[Dutch]
Hierbij verklaart NETGEAR Inc. dat het toestel Radiolan in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Malti [Maltese] Hawnhekk, NETGEAR Inc., jiddikjara li dan Radiolan jikkonforma mal-htigijiet
essenzjali u ma provvedimenti ohrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar
[Hungarian]
Alulírott, NETGEAR Inc. nyilatkozom, hogy a Radiolan megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski [Polish] Niniejszym NETGEAR Inc. oświadcza, że Radiolan jest zgodny z zasadniczymi
wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português
[Portuguese] NETGEAR Inc. declara que este Radiolan está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
NETGEAR Inc. izjavlja, da je ta Radiolan v skladu z bistvenimi zahtevami in ostalimi
relevantnimi določili direktive 1999/5/ES.
Slovensky
[Slovak] NETGEAR Inc. týmto vyhlasuje, _e Radiolan spĺňa základné po_iadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi
[Finnish] NETGEAR Inc. vakuuttaa täten että Radiolan tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar NETGEAR Inc. att denna Radiolan står I överensstämmelse med de
väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv
1999/5/EG.
Íslenska
[Icelandic]
Hér með lýsir NETGEAR Inc. yfir því að Radiolan er í samræmi við grunnkröfur og aðrar
kröfur, sem gerðar eru í tilskipun 1999/5/EC.
Norsk
[Norwegian] NETGEAR Inc. erklærer herved at utstyret Radiolan er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

v1.0 March 2009
v
FCC Requirements for Operation in the United States
FCC Information to User
This product does not contain any user serviceable components and is to be used with approved antennas only. Any
product changes or modifications will invalidate all applicable regulatory certifications and approvals
FCC Guidelines for Human Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Declaration Of Conformity
We NETGEAR, Inc., 4500 Great America Parkway, Santa Clara, CA 95054, declare under our sole responsibility that
the model WNAP210 ProSafe Wireless-N Access Point WNAP210 complies with Part 15 of FCC Rules. Operation is
subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
FCC Radio Frequency Interference Warnings & Instructions
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following methods:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
FOR HOME OR OFFICE USE
Tested to Comply
with FCC Standards
PY308400098
ProSafe Wireless-N Access Point WNAP210
Modifications made to the product, unless expressly approved by NETGEAR, Inc., could void the user's right to operate
the equipment.

v1.0 March 2009
vi
Canadian Department of Communications Radio Interference Regulations
This digital apparatus (ProSafe Wireless-N Access Point WNAP210) does not exceed the Class B limits for radio-noise
emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Product and Publication Details
Model Number: WNAP210
Publication Date: March 2009
Product Family: Wireless Access Point
Product Name: ProSafe Wireless-N Access Point WNAP210
Home or Business Product: Business
Language: English
Publication Part Number: 202-10474-01
Publication Version Number: 1.0

v1.0 March 2009
vii
Contents
About This Manual
Conventions, Formats, and Scope ................................................................................... xi
How to Use This Manual ..................................................................................................xii
How to Print This Manual .................................................................................................xii
Revision History ...............................................................................................................xiii
Chapter 1 
Introduction
About the ProSafe Wireless-N Access Point WNAP210 ................................................1-1
Key Features and Standards ..........................................................................................1-2
Supported Standards and Conventionss ..................................................................1-2
Key Features ............................................................................................................1-3
802.11b/g/n Standards–based Wireless Networking ................................................1-4
Autosensing Ethernet Connections with Auto Uplink ...............................................1-5
System Requirements ....................................................................................................1-6
What Is In the Box? ........................................................................................................1-6
Hardware Description .....................................................................................................1-7
Front Panel ...............................................................................................................1-7
Rear Panel ................................................................................................................1-8
Chapter 2 
Installation and Configuration
Wireless Equipment Placement and Range Guidelines .................................................2-1
Understanding WNAP210 Wireless Security Options ....................................................2-2
Installing the WNAP210 Wireless Access Point .............................................................2-3
Setting up the Wireless Access Point ......................................................................2-4
Configuring Lan and Wireless Settings ....................................................................2-4

v1.0 March 2009
viii
Configuring Your Wireless Settings ..........................................................................2-8
Deploying the Access Point ..........................................................................................2-10
Verifying Wireless Connectivity .............................................................................. 2-11
Logging In Using the Default IP Address ............................................................... 2-11
Mounting the Access Point Using the Wall Mount Kit (Optional) ..................................2-12
Configuring and Testing Your PCs for Wireless Connectivity .................................2-13
Logging in to the Access Point ...............................................................................2-14
Setting Basic IP Options ...............................................................................................2-15
Wireless Settings ..........................................................................................................2-16
Configuring 802.11b/g/n Wireless Settings ............................................................2-16
Configuring QoS Settings .......................................................................................2-20
Setting Up and Testing Basic Wireless Connectivity ....................................................2-21
Understanding Security Profiles ...................................................................................2-22
SSID and WEP/WPA Settings Setup Form ............................................................2-26
Configuring the RADIUS Server Settings ...............................................................2-27
Setting up a Security Profile ...................................................................................2-29
Configuring WEP .............................................................................................2-31
Configuring WPA with RADIUS .......................................................................2-33
Configuring WPA2 with RADIUS .....................................................................2-34
Configuring WPA and WPA2 with RADIUS .....................................................2-35
Configuring WPA-PSK .....................................................................................2-36
Configuring WPA2-PSK ...................................................................................2-37
Configuring WPA-PSK and WPA2-PSK ...........................................................2-38
Restricting Wireless Access by MAC Address .......................................................2-39
Chapter 3 
Management
Remote Management .....................................................................................................3-1
Remote Console .............................................................................................................3-2
Manage Using Telnet ...............................................................................................3-3
Upgrading the Wireless Access Point Software .............................................................3-4
Configuration File Management .....................................................................................3-5
Saving the Configuration ..........................................................................................3-6
Restoring the Configuration ......................................................................................3-8
Restoring the WNAP210 to the Factory Default Settings ...............................................3-8

v1.0 March 2009
ix
Changing the Administrator Password ...........................................................................3-9
Enabling the SysLog Server .........................................................................................3-10
Using Activity Log Information ...................................................................................... 3-11
Viewing General Summary Information ........................................................................3-12
Viewing Network Traffic Statistics .................................................................................3-14
Viewing Available Wireless Station Statistics ................................................................3-16
Enabling Rogue AP Detection ......................................................................................3-17
Importing a Rogue AP List from a File ...................................................................3-18
Viewing and Saving AP Lists ........................................................................................3-19
Viewing AP Lists ....................................................................................................3-19
Creating AP Lists Manually ....................................................................................3-21
Chapter 4 
Advanced Configuration
802.1Q VLAN .................................................................................................................4-1
Hotspot Settings .............................................................................................................4-3
Configuring Advanced Wireless Settings .......................................................................4-4
Configuring Advanced QoS Settings ..............................................................................4-6
Enabling Wireless Bridging and Repeating ....................................................................4-8
Configuring a WNAP210 as a Point-to-Point Bridge .............................................. 4-11
Configuring a Point-to-Multi-Point Wireless Bridge ................................................4-13
Configuring the WNAP210 as a Wireless Repeater ...............................................4-15
Configuring the WNAP210 for Client Mode ........................................................... 4-16
Chapter 5 
Troubleshooting and Debugging
No lights are lit on the wireless access point ..................................................................5-1
The Wireless LAN activity light does not light up ............................................................5-2
The LAN light is not lit .....................................................................................................5-2
I cannot access the Internet or the LAN with a wireless capable computer ...................5-2
I cannot connect to the WNAP210 to configure lit ..........................................................5-3
When I enter a URL or IP address I get a timeout error .................................................5-3
Using the Reset Button to Restore Factory Default Settings ..........................................5-4

v1.0 March 2009
x
Appendix A
Default Settings and Technical Specifications
Factory Default Settings ................................................................................................ A-1
Technical Specifications ................................................................................................. A-3
Appendix B
Related Documents
Appendix C
Command Sets
Index

xi
v1.0 March 2009
About This Manual
The NETGEAR®ProSafe™ Wireless-N Access Point WNAP210 Reference Manual describes how
to install, configure and troubleshoot the ProSafe Wireless Access Point WNAP210. The
information in this manual is intended for readers with intermediate computer and Internet skills.
Conventions, Formats, and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
•Typographical Conventions.This manual uses the following typographical conventions::
Italic Emphasis, books, CDs, file and server names, extensions
Bold User input, IP addresses, GUI screen text
Fixed Command prompt, CLI text, code
italic URL links
•Formats.This manual uses the following formats to highlight special messages:
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note may result in a malfunction or damage to the
equipment.
Note: This format is used to highlight information of importance or special interest.

Danger: This is a safety warning. Failure to take heed of this notice may result in
personal injury or death.
ProSafe Wireless-N Access Point WNAP210 Reference Manual
xii About This Manual
v1.0 March 2009
•Scope.This manual is written for the WNAP210 Wireless Access Point according to these
specifications:
Product Version Version 1.0
Manual Publication Date March 2009
For more information about network, Internet, firewall, and VPN technologies, see the links to the
NETGEAR website in Appendix B, “Related Documents”
Note: Product updates are available on the NETGEAR, Inc. website at
http://kbserver.netgear.com/main.asp.
.
How to Use This Manual
The HTML version of this manual includes the following:
• Buttons, and , for browsing forward or backward through the manual one page
at a time.
•A button that displays the table of contents and a button that displays an index.
Double-click a link in the table of contents or index to navigate directly to where the topic is
described in the manual.
•A button to access the full NETGEAR, Inc. online knowledge base for the product
model.
• Links to PDF versions of the full manual and individual chapters.
How to Print This Manual
To print this manual, you can choose one of the following options, according to your needs.
•Printing a page from HTML. Each page in the HTML version of the manual is dedicated to
a major topic. Select File > Print from the browser menu to print the page contents.

ProSafe Wireless-N Access Point WNAP210 Reference Manual
About This Manual xiii
v1.0 March 2009
•Printing from PDF. Your computer must have the free Adobe Acrobat reader installed in
order to view and print PDF files. The Acrobat reader is available on the Adobe Web site at 
http://www.adobe.com.
– Printing a PDF chapter. Use the PDF of This Chapter link at the top left corner of any
page.
• Click the PDF of This Chapter link at the top left corner of any page in the chapter
you want to print. The PDF version of the chapter you were viewing opens in a
browser window.
• Click the print icon in the upper left of your browser window.
–Printing a PDF version of the complete manual. Use the Complete PDF Manual link
at the top left corner of any page.
• Click the Complete PDF Manual link at the top left corner of any page in the manual.
The PDF version of the complete manual opens in a browser window.
• Click the print icon in the upper left corner of your browser window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
Revision History
Part Number Version
Number Date Description
202-10474-01 1.0 March
2009
Initial edition: New product

ProSafe Wireless-N Access Point WNAP210 Reference Manual
xiv About This Manual
v1.0 March 2009

1-1
v1.0 March 2009
Chapter 1
Introduction
This chapter describes some of the key features of the NETGEAR ProSafe Wireless-N Access
Point WNAP210. It also includes the minimum prerequisites for installation (“System
Requirements” on page 1-5), package contents (“What Is In the Box?” on page 1-5), and a
description of the front and back panels of the WNAP210 (“Hardware Description” on page 1-6).
About the ProSafe Wireless-N Access Point WNAP210
The ProSafe Wireless-N Access Point WNAP210 is the basic building block of a wireless LAN
infrastructure. It provides connectivity between Ethernet wired networks and radio-equipped
wireless notebook systems, desktop systems, print servers, and other devices.
The access point provides wireless connectivity to multiple wireless network devices within a
fixed range or area of coverage—interacting with a wireless network interface card (NIC) through
an antenna. Typically, an individual in-building access point provides a maximum connectivity
area of about a 500 foot radius. Consequently, the ProSafe Wireless-N Access Point WNAP210
can support a small group of users in a range of several hundred feet. Most access points can
handle between 10 to 30 users simultaneously.
The ProSafe Wireless-N Access Point WNAP210 acts as a bridge between the wired LAN and
wireless clients. Connecting multiple WNAP210 Wireless-N Access Points through a wired
Ethernet backbone can further increase the wireless network coverage. As a mobile computing
device moves out of the range of one access point, it moves into the range of another. As a result,
wireless clients can freely roam from one access point to another and still maintain seamless
connection to the network.
The auto-sensing capability of the ProSafe Wireless-N Access Point WNAP210 allows packet
transmission at up to 300 Mbps, or at reduced speeds to compensate for distance or
electromagnetic interference.

ProSafe Wireless-N Access Point WNAP210 Reference Manual
1-2 Introduction
v1.0 March 2009
Key Features and Standards
The WNAP210 Wireless-N Access Point is easy to use and provides solid wireless and networking
support. It also offers a wide range of security options.
Supported Standards and Conventions
The following standards and conventions are supported:
•Standards Compliance. The wireless access point complies with the IEEE 802.11 b/g
standards for wireless LANs, and is WiFi certified for 802.11n draft 2.0 standard.
•Full WPA and WPA2 support. The wireless access point provides WPA and WPA2
enterprise-class strong security with RADIUS and certificate authentication as well as
dynamic encryption key generation. The WPA-PSK and WPA2-PSK preshared key
authentication is without the overhead of RADIUS servers but with all of the strong security of
WPA.
•Multiple BSSIDs. The access point supports multiple BSSIDs. When a wireless access point
is connected to a wired network and a set of wireless stations, it is called a Basic Service Set
(BSS). The Basic Service Set Identifier (BSSID) is a unique identifier attached to the header of
packets sent over a WLAN that differentiates one WLAN from another when a mobile device
tries to connect to the network.
The multiple BSSID feature allows you to configure up to eight SSIDs per radio mode on your
access point and assign different configuration settings to each SSID. All the configured
SSIDs are active, and the network devices can connect to the access point by using any of
these SSIDs.
•DHCP client support. DHCP provides a dynamic IP address to PCs and other devices upon
request. The access point can act as a client and obtain information from your DHCP server; it
can also act as a DHCP server and provide network information for wireless clients.
•SNMP Support. Support for Simple Network Management Protocol (SNMP) Management
Information Base (MIB) management.
• 802.1Q VLAN (virtual LAN) support.A network of computers that behave as if they are
connected to the same network even though they might actually be physically located on
different segments of a LAN. VLANs are configured through software rather than hardware,
which makes them extremely flexible. VLANs are very useful for user and host management,
bandwidth allocation, and resource optimization.

ProSafe Wireless-N Access Point WNAP210 Reference Manual
Introduction 1-3
v1.0 March 2009
Key Features
The WNAP210 Access Point provides solid functionality, including the following features:
• Multiple operating modes:
– Wireless Access Point. Operates as a standard 802.11b/g/n access point.
– Point-to-Point Bridge. In this mode, the access point communicates only with another
bridge-mode wireless station or access point. Network authentication should be used to
protect this communication.
– Point-to-Multi-Point Bridge. Select this only if this access point is the “master” for a
group of bridge-mode wireless stations. The other bridge-mode wireless stations send all
traffic to this master, and do not communicate directly with each other. Network
authentication should be used to protect this traffic.
– Wireless Repeater. In this mode, the access point does not function as an access point. It
communicates only with Repeater mode, Point-to-Point Bridge mode, and Point-to-Multi-
point-bridge-mode wireless stations. Network authentication should be used to protect this
communication.
• Hotspot settings.You can allow all HTTP (TCP, port 80) requests to be captured and
redirected to the URL you specify.
•Upgradeable firmware. Firmware is stored in a flash memory, you can upgrade it easily,
using only your Web browser, and you can upgrade it remotely. You can also use the
command-line interface.
•Rogue AP detection. The Rogue AP filtering feature ensures that unknown APs are not given
access to any part of the LAN.
•Access Control.The Access Control MAC address filtering feature can ensure that only
trusted wireless stations can use the access point to gain access to your LAN.
•Security profiles.When using multiple BSSIDs, you can configure unique security settings
(encryption, SSID, and so on) for each BSSID.
•Hidden mode. The SSID is not broadcast, assuring only clients configured with the correct
SSID can connect.
•Configuration backup. Configuration settings can be backed up to a file and restored.
•Secure and economical operation. Adjustable power output allows more secure or
economical operation.
•Power over Ethernet. Power can be supplied to the access point over the Ethernet port from
any 802.3af-compliant mid-span or end-span source.

ProSafe Wireless-N Access Point WNAP210 Reference Manual
1-4 Introduction
v1.0 March 2009
•Autosensing Ethernet connection with Auto Uplink™ interface. Connects to 10/100/1000
Mbps IEEE 802.3 Ethernet networks.
•LED indicators. Power, Test, LAN speed, LAN activity, and wireless activity for each radio
mode are easily identified.
• Wireless Multimedia (WMM) support.WMM is a subset of the 802.11e standard. WMM
allows wireless traffic to have a range of priorities, depending on the kind of data. Time-
dependent information, like video or audio, has a higher priority than normal traffic. For
WMM to function correctly, wireless clients must also support WMM.
• Quality of Service (QoS) Support. You can configure parameters that affect traffic flowing
from the wireless access point to the client station and traffic flowing from the client station to
the wireless access point. The QoS feature allows you to prioritize traffic, such as voice and
video traffic, so that packets do not get dropped.
• VLAN security profiles.Each security profile is automatically allocated a VLAN ID when
the security profile is modified.
802.11b/g/n Standards–based Wireless Networking
The ProSafe Wireless-N Access Point WNAP210 provides a bridge between Ethernet wired LANs
and 802.11b/g and 802.11 draft n–compatible wireless LAN networks. It provides connectivity
between Ethernet wired networks and radio-equipped wireless notebook systems, desktop
systems, print servers, and other devices. Additionally, the access point supports the following
wireless features:
• Aggregation support
• Reduced InterFrame spacing support
• Multiple input, multiple output (MIMO) support
• Distributed coordinated function (CSMA/CA, back-off procedure, ACK procedure,
retransmission of unacknowledged frames)
• RTS/CTS handshake
• Beacon generation
• Packet fragmentation and reassembly
• Auto or long preamble
• Roaming among access points on the same subnet
Autosensing Ethernet Connections with Auto Uplink
The access point can connect to a standard Ethernet network. The LAN interface is autosensing
and capable of full-duplex or half-duplex operation.

ProSafe Wireless-N Access Point WNAP210 Reference Manual
Introduction 1-5
v1.0 March 2009
The wireless access point incorporates Auto UplinkTM technology. The Ethernet port automatically
senses whether the Ethernet cable plugged in to the port should have a “normal” connection such
as to a computer or an “uplink” connection such as to a switch or hub. That port then configures
itself correctly. This feature also eliminates any concerns about crossover cables, as Auto Uplink
accommodates either type of cable to make the right connection.
System Requirements
Before installing the access point, make sure that your system meets these requirements:
• A 10/100/1000 Mbps local area network device such as a hub or switch
• The Category 5 UTP straight-through Ethernet cable with RJ-45 connector included in the
package, or one like it
• A 100–120 V, 50–60 Hz AC power source
• A Web browser for configuration such as Microsoft Internet Explorer 5.0 or later, or Mozilla
3.0 or later
• At least one computer with the TCP/IP protocol installed
• 802.11b/g- or 802.11b/g-compliant devices, such as the NETGEAR WG511 Wireless Adapter
What Is In the Box?
The product package should contain the following items:
• ProSafe Wireless-N Access Point WNAP210
• Power adapter and cord (12Vdc, 1.0A)
• Straight-through Category 5 Ethernet cable
• NETGEAR WNAP210 Wireless-N Access Point Installation Guide
•Resource CD, which includes this manual
• Vertical stand feet (2)
• Wall mount kit made up of brackets (2) and hardware
Contact your reseller or customer support in your area if there are any missing or damaged parts.
Refer to the for the the NETGEAR, Inc., website at http://kbserver.netgear.com/main.asp for the
telephone number of customer support in your area. You should keep the Installation Guide, along
with the original packing materials, and use the packing materials to repack the access point if you

ProSafe Wireless-N Access Point WNAP210 Reference Manual
1-6 Introduction
v1.0 March 2009
need to return it for repair. To qualify for product updates and product warranty, NETGEAR
encourages you to register on the NETGEAR Web site at http://my.netgear.com/registration/
login.aspx.
Hardware Description
This section describes the front and rear hardware functions of the access point.
Front Panel
The WNAP210 front hardware functions are described in the following figure and table.
1234
Figure 1-1
The following table explains the LED:
Table 1-1. Front Panel LEDs
Item LED DESCRIPTION
1Power
Off. Power is off.
On. Power is on.
2Test
Blinking. The device is running a self-test or is loading software. This
LED may blink for a minute before going off. If it continues to
blink, it indicates a system fault.