New England Arbors The 4x4 Composite Garden Bed User manual

Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
(UK Tel: [phone] - Mon. to Fri. 1:00 PM to 10:00 PM GMT).
1. Posts (4) - 14063
2. Side Panels (8) - 14064
3. Post Caps (4) - 14065
General Information
•Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 4’x 8’ (1.2m x 2.4m) for unobstructed assembling.
•You should not need to use excessive force when assembling components.
Please read through before starting assembly.
ASSEMBLY INSTRUCTIONS
The 4x4 (122cm x 122cm)
Composite Garden Bed
1
2
1
Ver 2.1-100517
www.newenglandarbors.com
www.newenglandarbors.co.uk
3
11" (28cm)
12" (30cm)
42"
(107cm)
48"
(122cm)
24"
(61cm)
48"
(122cm)
48"
(122cm)
45"
(114cm)
45" (114cm)

STEP T WO
Excavate four, 6-inch holes in a square pattern, 46” x46”(117cm
x 117cm), as shown aside. Holes are to be 12" (30cm) deep.
Insert the Raised Bed assembly into the holes and replace
the excavated dirt back and around the posts.
Raised Bed Installation
1
3
2
Insert boards into the posts as shown. The boards are tabbed and
will lock into place once fully inserted into the routed holes on the
posts.
Repeat for all boards.
Place a post cap onto the top of each post. The design of the post
cap allows them to be press-fitted into place.
The 4x4 (122cm x 122cm)Composite Garden Bed
STEP ONE
Raised Bed Assembly
1
2
1
Mitered
Tabbed
23
12” (30cm)
6"
(15cm)
46”
(117cm)
46”
(117 cm)
1
2
2
www.newenglandarbors.com
www.newenglandarbors.co.uk
North America Toll Free Phone: [phone]
United Kingdom Tel: [phone]