New England Arbors The Versailles Raised Planter Bed User manual

Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
1. Post with Post Caps attached (4)
2. Side Panels (8)
3. 3.5”Stainless Steel Screws (16)
General Information
• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e.shipping box) to avoid scratching.
• We recommend an area approx 4’x 8’ for unobstructed assembling.
• You should not need to use excessive force when assembling components.
The Versailles Raised Planter Bed
Please read through before starting assembly.
ASSEMBLY INSTRUCTIONS
3
1
Not to Scale
2
1
V2.0/261916
59 in.
59 in.
65.2 in.
65.2 in.
65 in.
9 in. 12 in.
56 in.
www.newenglandarbors.com

STEP T WO
If you’ve purchased the Extension Kit (sold separately),Repeat the
stepsabove.
The Versailles RaisedPlanter Bed
Extension Installation
4
Toll Free Phone: [phone] Toll Free Fax: [phone]
www.newenglandarbors.com
3
2
STEP ONE
Build one wall by inserting two walls into the posts as shown.
Repeat for all four walls.
Using the screws provided, fasten the side panels to the posts.
(one screw for each intersection of side panel and post)
Raise Bed Installation
1
2
1
2
3
4