Next 687084 User manual

ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
687084 OAK SLIDING DOOR SHAKER FRAME
SIZE SMALL
1 of 11 P4DA73 R5
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple
step by step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• We recommend the use of the wall attachment bracket for safety reasons.
Regrettably self assembly items cannot be returned once assembly is part or fully completed
unless the item is found to be faulty. Should you need to return the unassembled product,
please repack in the original packaging.
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down
the lacquer finish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
Avoid keeping furniturein direct sunlight or closeto any heat sources as this can cause cracking,
discolouration or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
All assembly fixings should always be tightened properly and periodically check all fixings and
tighten if necessary.
• The finish will mellow and change colour over time.
CARE INSTRUCTIONS
PRODUCT INFORMATION
Tools Needed
Made in Poland.
GLASS INFORMATION
This item contains glass. Please handle with extreme care.
Batch No: MM-42 , Date of Manufacture: April 2014
This unit contains safety film backed mirrored glass door panels of a nominal thickness of 3 mm
which are not required to be classified to BS 6206.
If a glass component is chipped or broken replace with glass of the type described on this label.
Consult the manufacturer, retailer or agent with regard to obtaining a manufacturing specification
and shape for replacement glass quoting the model number, and batch number or date of
manufacture.
Helpline
If you have any problems with this
product or require any replacement
fittings please contact Customer
Services Tel: [phone]

2 PERSON ASSEMBLY
ASSEMBLED DIMENSIONS
APPROXIMATE ASSEMBLY TIME
REQUIRED ASSEMBLY TOOLS
REQUIRED ASSEMBLY SPACE
FLOOR AREA
3.0 M x 3,0 M
1.0 hrs
DESCRIPTION:
Assembly
Instruction
770 mm
770mm
2030 mm
687084 OAK SLIDING DOOR
SHAKER FRAME SIZE SMALL
2 of 11 P4DA73 R5

PARTS LIST
NO PART LIST QTY
.
(12) RIGHT DOOR 1
(13) LEFT DOOR 1
DESCRIPTION:
Assembly
Instruction
Z3
Z3
Z4
Z5
PACK 1 CONSISTS OF PARTS :
Z3, Z4, Z5, Fittings .
PACK 2 CONSISTS OF PARTS :
13, AI .
PACK 3 CONSISTS OF PARTS :
12 .
3 of 11
13
12
687084 OAK SLIDING DOOR
SHAKER FRAME SIZE SMALL
P4DA73 R5

HARDWARE LIST DO NOT MIX CONTENT OF HARDWARE BOXES
DESCRIPTION:
10 20 30 40 50 60 70 80 90 100 mm
Assembly
Instruction
32x
3,0x13mm
HANDLE SCREW
W
T
L=2030mm
BAG 8
3x
ANTI-DUST STRIP
INTERNAL DOOR ROLL
WITH BRAKE
EXTERNAL DOOR ROLL
LOWER FITTING
INTERNAL DOOR
LOWER FITTING
EXTERNAL DOOR
PLASTIC SLEEVE
FOR BRAKE
HANDLE HANDLE
HANDLE
1x
2x
2x
2x
1x
Q1
U
Q2
U1
S
BAG 3
BAG 5 BAG 6
BAG 3 BAG 7
2x 1x
Z3 Z4
L=2030mm L=2030mm
44mm
1x
Z5
L=2030mm
29mm
4x
2x
3,5x13mm
90x40x15mm
SCREW
BAG 9 BAG 9
PACK 1 PACK 1 PACK 1
PACK 1
V1
V
1:2
INTERNAL DOOR ROLL
28x
1x 6,3x11mm
SCREW
R
Q
BAG 3
BAG 4
BAG 5
BAG 6
BAG 7
BAG 4
Fittings from Q to V1 are supplied with carcass.
4 of 11
WALL BRACKET
687084 OAK SLIDING DOOR
SHAKER FRAME SIZE SMALL
P4DA73 R5

Top Tips before you start!
1. Please check that all parts are present before you start the assembly of your furniture,
as once assembled, the furniture is exempt from our home approval policy.
2. For ease and speed of assembly, we recommend that before you commence each step
of the assembly, that you identify all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people (as indicated
on page 1) to assemble your product safely.
4. We recommend that, where possible, all items are assembled near to the area in which
they will be placed in use, to avoid moving the product unnecessarily once assembled.
5. For the protection of your furniture, particularly items of high gloss finish, we recommend
that the product is placed on aprotected surface during assembly to prevent any damage.
6. During assembly please take care not to over-tighten any fittings, as this may damage
the product .
Care and Maintenance of your Furniture
Please periodically check all fittings and re-tighten as necessary.
Please do not jump on your furniture.
To clean your item, please use adamp cloth and wipe clean.
Never allow any kind of liquid to remain on your furniture. Absorption can cause wood to
warp or finishes to de-laminate.
DESCRIPTION:
Assembly
Instruction
5 of 11
687084 OAK SLIDING DOOR
SHAKER FRAME SIZE SMALL
P4DA73 R5

12
DESCRIPTION:
Assembly
Instruction
1x 14x 1x 1x 2x
QRQ1 SQ2
33
Q
R
22
1
2
11
Q1
RS
Q1
22
1
2
11
1
6 of 11
23 mm
23 mm
R
R
Q2
Q2
687084 OAK SLIDING DOOR
SHAKER FRAME SIZE SMALL
P4DA73 R5

12
DESCRIPTION:
Assembly
Instruction
16x 1x 1x 1x
WZ3 Z4 T
W
L=2030mm L=2030mm L=2030mm
44mm
17mm
T
Z4
W
T
Z3
2
7 of 11
687084 OAK SLIDING DOOR
SHAKER FRAME SIZE SMALL
P4DA73 R5

13
DESCRIPTION:
Assembly
Instruction
2x 14x 2x
URU1
RU
22
11
RU
8 of 11
3
20 mm
20 mm
R
R
U1
U1
687084 OAK SLIDING DOOR
SHAKER FRAME SIZE SMALL
P4DA73 R5

13
DESCRIPTION:
Assembly
Instruction
16x 1x 1x 2x
WZ3 Z5 T
W
W
L=12030mm L=2030mm L=2030mm
44mm
29mm
T
T
Z5
Z3
Z3 T
Z5
T
4
9 of 11
687084 OAK SLIDING DOOR
SHAKER FRAME SIZE SMALL
P4DA73 R5

DESCRIPTION:
Assembly
Instruction
13
12
2
1
3
4
1
11
3
12
13
1
2
4
22
2
5
12
2
13
6
6
8
O
9
Q1
Q1
33
12
U
b
a
44
5
10 of 11
687084 OAK SLIDING DOOR
SHAKER FRAME SIZE SMALL
P4DA73 R5