Next HEMMINGFORD M98474 User manual

We’re confident you’ll love your gorgeous new Next
furniture. However, it’s worth making absolutely c ertain
before yo u pu t it all together.
So, let’s quickl y run throug h these three steps:
TIPS FOR RETURNS
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
1. COLOUR
Make sure you’re happy with the colour
No need to unpack everything, just check the first component.
2. PROTECTIVE PACKAGING
If you’re happy, then it’s time to get opening! Start by laying everything out
on the protective packaging – this will prevent anything getting scratched.
3. PARTS PAGE
Finally, double check you have all the pieces by referencing
the parts page of the instructions.
•Check everything is there (the ‘parts page’
is a handy checklist).
•Pop all the loose Fittings and Fixtures into
the packaging provided or tie them up in a
plastic bag.
•Wrap all the big components back
up in the original protective packaging.
•Close up the box and seal it securely
(don’t be afraid to use plenty of tape).
DO DON’T
•Leave anything assembled -
all components should be dismantled
and separately packed.
•Put loose Fixtures and Fittings
straight into the box.
•Throw it back in the box carelessly –
as it may get damaged.
Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.
BEFORE YOU GET
STARTED...

1
I
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Need Help?
With: Assembly Instructions
Missing or danaged parts
CCALL: 0333 777 8999
Produced in China for Next Retail Ltd.
M98474-2022-V1.
Fabric
100%polyester
Content
Item No.
M98474 Light Natural
Assembly instructions
M98474
Actual product size
DOUBLE: W148.5 X L202 X H152.5cm
KING: W163.5 X L212 X H152.5cm
HEMMINGFORD STANDARD BED

2
Warnings Don'ts
We suggest you retain these instructions for future reference.
Keep fittings out of children's reach and keep children well away
from construction area.
This product should only by used on firm ,level ground.
Please periodically check all fittings and re-tighten as
necessary.
Please do not stand on your furniture.
Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause deterioration of the colour.
Do not tighten screws until fully assembled.
Do not over tighten screws or bolts.
Do not drag or pull your furniture.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaners.
BEFORE YOU START
Number of people required to assemble
Do's
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the
right tools, plenty of space.
Due to the size of this product we recommend that it is
assembled in the room intended for use.
Unwrap all packaging materials and place the components
on a clean surface to protect them from damage.
We recommend that the packaging is used to protect the
surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly.
Ensure the product is fully assembled as illustrated and all
fixings are fully tightened before use. Check fixings regularly
to ensure they remain tight.
When moving your assembled bed. It is best to lift the bed
and never to drag it. Please check that the centre support
rail is securely fixed in place.
When adjusting the support legs ensure that the foot is set
5mm from the floor surface without the mattress in place.
When in use the legs will create the required support for
the product.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause materials to warp or finishes to
de-laminate.
To clean your item, please use a vacuum or lightly brush clean.
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independent home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT,
To view our full furniture range please visit www.next.co.uk
not supplied
Tools required
EASY
BUILD
Two people are required to assemble this item
Time to assemble : 30 minutes
Produced in China for Next Retail Ltd.
M98474-2022-V1.
Assembly instructions
M98474
HEMMINGFORD STANDARD BED

Ref
3
Dimensions Visal Qty Ctn Ref Dimensions Visal Qty Ctn
Components supplied. Please use this guide if you require replacement parts.
GETTING TO KNOW YOUR PRODUCT
1
2
5
1
1
2
Headboard
Footboard
Centre Support
Bar Legs
1
2
3Side Rail 2
4
3
2
4Legs
6
3
7
Slat 3821
Centre
Support Bar
1
2
3
8
6
5
4 3
Corner Brackets
4
2
3
5
6
6
6
7
7
7
7
8
Produced in China for Next Retail Ltd.
M98474-2022-V1.
Assembly instructions
M98474
HEMMINGFORD STANDARD BED

4
A
10 20 30 40 50 60 70 80 90 100 110
Ref Qty
Dimensions
2
B28
C
D
M5
M8x25
M8
M8x17 32
E 2M8x40
Dimensions
Fixtures and fittings supplied (actual size)
Fixtures and fittings supplied (not to scale)
Ref Qty Spare
J1Slat pin
2
Spare
2
N/A
1
Dimensions
Ref Qty Spare
H3 1
Slat centre
cap
28
8
G1M14 N/A
F M8 14
2
Produced in China for Next Retail Ltd.
M98474-2022-V1.
Assembly instructions
M98474
HEMMINGFORD STANDARD BED

5
1
2
1
2
1
2
3
3
B
C
D
1
3
2
7
B
C
D
2
CD
G
F
6
Cx4 M8 Dx4 M8x17mm Gx1 M14
Fx4 M8
Bx24 M8x25mm Cx24 M8 Dx24 M8x17mm
Ensure bed frame is square
!
Ax2 M5
3
3
7
7
Produced in China for Next Retail Ltd.
M98474-2022-V1.
Assembly instructions
M98474
6
HEMMINGFORD STANDARD BED

6
3
Bx4 M8x25mm Dx4 M8x17mm
Ex2 M8x40mm
Ax2 M5
Ax2 M5
Hx3
5mm
B
D
1
1
2
2
E
5
4
4
5
5
E
E
H
H
H
100%
5
H
4
4
Ensure bed frame is square
!
4
Produced in China for Next Retail Ltd.
M98474-2022-V1.
Assembly instructions
M98474
4
HEMMINGFORD STANDARD BED

8
J
SLIDE IN
H
8
Jx8
7
5
5
King
King
Produced in China for Next Retail Ltd.
M98474-2022-V1.
Assembly instructions
M98474
Jx6
Double
8
J
Double
J
SLIDE IN
H
8
8
8
8
8
H
H
H
H
H
H
J
J
J
J
J
J
J
JJ
J
J
JJ
J
HEMMINGFORD STANDARD BED

8
Produced in China for Next Retail Ltd.
M98474-2022-V1.
Assembly instructions
M98474
Overall Dimensions (WxLxH cm) Internal Dimensions (WxL cm)
DOUBLE : 148.5 x 202 x 152.5/36.5 137.5 x 192
KING : 163.5 x 212 x 152.5/36.5 152.5 x 202
7.5
152.5
W
L
44.5
1136.5
25.5
HEMMINGFORD STANDARD BED