Next MALVERN M37672 User manual

We’re condent you’ll love your gorgeous new Next
furniture. However, it’s worth making absolutely certain
before you put it all together.
So, let’s quickly run through these three steps:
TIPS FOR RETURNS
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
1. COLOUR
Make sure you’re happy with the colour
No need to unpack everything, just check the first component.
2. PROTECTIVE PACKAGING
If you’re happy, then it’s time to get opening! Start by laying everything out
on the protective packaging – this will prevent anything getting scratched.
3. PARTS PAGE
Finally, double check you have all the pieces by referencing
the parts page of the instructions.
•Check everything is there (the ‘parts page’
is a handy checklist).
•Pop all the loose fittings and fixtures into
the packaging provided or tie them up in a
plastic bag.
•Wrap all the big components back
up in the original protective packaging.
•Close up the box and seal it securely
(don’t be afraid to use plenty of tape).
DO DON’T
•Leave anything assembled -
all components should be dismantled
and separately packed.
•Put loose fixtures and fittings straight
into the box.
•Throw it back in the box carelessly –
as it may get damaged.
Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.
BEFORE YOU GET
STARTED...

The structures of hollow board & honeycomb board are as below:
The centre of Hollow board & Honeycomb board is hollow. To avoid damaging the hollow
board/honeycomb board, we suggest you not step on the hollow board/honeycomb board or not
put other part on the board on the end when you assemble the product.
Next Retail Ltd, Desford Road, Enderby, Leicester, LE19 4AT
Care instructions for hollow board & Honeycomb
board during you assembling the product

M37672/M37700/U85447
M37672/M37700/U85447-2022-V1
MALVERN OAK /DOVE GREY/CLASSIC CREAM CORNER STORAGE LADDER
H 160 x W 54 x D 54 cm
Actual product size
Assembly instructions
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Produced in China for Next Retail Ltd.
Need Help ?
With: Assembly instruction
Missing or damaged parts
CALL: 0333 777 8999

Two people are required to assemble this item
Time to assemble : 30 min utes
1
Produced in China for Next Retail Ltd.
Do's
We suggest you spend a short time reading through this leaflet before you start.
BEFORE YOU START
Don'ts
Do not drag or pull your furniture.
When you are ready to start, make sure that you have the right tools and plenty of space.
Unwrap all packaging materials and place the components on a clean surface to protect it from damage,
We recommend that the packaging is used to protect the surfaces during assembly.
Carefully check that you have all the parts before beginning assembly.
Due to the size of this product we recommend that it is assembled in the room intended for use.
Ensure the product is fully assembled as illustrated and all fixings fully tightened before use.
Wood will mellow and change colour over time, we recommend that ornaments and items placed on the surface are moved
regularly for the first few months to prevent uneven mellowing.
Wipe occasionally with a soft cloth slightly dampened with water. Then buff with a dry clean soft cloth.
Do not rub or scrub the surface when cleaning.
Do not use silicone based furniture polish. Silicone in furniture polishes can break down the finish.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause wood to warp or finishes to de-laminate.
Do not place hot items (e.g. hot drinks) directly on to the wood surface. Please make sure you use a placemat or coaster.
Number of people required to assemble
Assembly instructions
PH2 X2
Tools required
not supplied
M37672/M37700/U85447
M37672/M37700/U85447-2022-V1
MALVERN OAK /DOVE GREY/CLASSIC CREAM CORNER STORAGE LADDER

Assembly instructions
2
GETTING TO KNOW YOUR PRODUCT
Produced in China for Next Retail Ltd.
M37672/M37700/U85447
M37672/M37700/U85447-2022-V1
MALVERN OAK /DOVE GREY/CLASSIC CREAM CORNER STORAGE LADDER
13 9
47
14
14
8
10
11
12
56
3
1
2

111
Assembly instructions
3
Components supplied. Please use this guide if you require replacement parts.
Produced in China for Next Retail Ltd.
Ref Dimensions
Visual
Qty Ctn Ref Dimensions
Visual
Qty Ctn
9x68cm
211
54x54cm
311
4x9cm
411
37x49cm
611
5x9cm
7 11
37x47cm
811
54x54cm
911
46.5x110cm
10 11
39.5x39.5cm
11 11
35x35cm
12 11
31.5x31.5cm
13 11
46.5x110cm
14 21
31x36cm
M37672/M37700/U85447
M37672/M37700/U85447-2022-V1
MALVERN OAK /DOVE GREY/CLASSIC CREAM CORNER STORAGE LADDER
51 1
5x9cm

Connector
Push connector into housing
to join.
Make sure there is no gap
between the panels.

4
Produced in China for Next Retail Ltd.
Assembly instructions
Fixtures and fittings supplied ( not to scale)
Ref Dimensions
Visual
Qty
Fixtures and fittings supplied ( not to scale)
Spare Qty
10 20 30 40 50
60 70 80 90
100
110
120
Fixtures and fittings
supplied (actual size)
Ref Dimensions Qty
Spare Qty
1
N/A
N/A
N/A
2
N/A
1
5
1
N/A
1
2
1
N/A
S41
Ø4 x 16mm
N/A
1
N/A
4
N/A
U139
Ø4.5 x 15mm
1
8
B3
Ø15 x 12mm
Titus
B8
Ø8 x 38mm
D6
Ø8 x 30mm
N/A
2
1
7
1
2
Z23
Ø4 x 25mm
Y8
Ø6 x 50mm
V68
Ø6 x 40mm
T1
E28
N1 N/A
2
N/A
O1 Ø21mm
C11
M37672/M37700/U85447
M37672/M37700/U85447-2022-V1
MALVERN OAK /DOVE GREY/CLASSIC CREAM CORNER STORAGE LADDER

5
Assembly instructions
1
Produced in China for Next Retail Ltd.
2
2
N/A
1
T1
V68
Ø6 x 40mm
1
N/A
1
T1
Y8
Ø6 x 50mm
M37672/M37700/U85447
M37672/M37700/U85447-2022-V1
MALVERN OAK /DOVE GREY/CLASSIC CREAM CORNER STORAGE LADDER
1
2
2
3