Noble House Home Furnishings BOOKSHELF User manual

WARNING!!
Furniture Tipping Risk.
Serious risk of severe or fatal crush injuries can occur from
furniture tipping over if not secured.
Children like to climb on furniture and Unsecured furniture can
pose a serious danger.
Please follow all instructions and install the tip-over restraints
provided.
In addition to installing the restraints, to help prevent tip-over:
1. Unless specifically designed to accommodate, do not set TV’s
or other heavy objects on top of this product.
2. Never allow children to climb or hang on the shelves.
3. Do not step on the Bookshelf base.
Noble house Home Furnishings LLC Page 1 OF 11

Label Picture Description QTY
A First Panel 1
B Second Panel 1
C Third Panel 1
BOOKSHELF
Caution : You must read this before you proceed
Noble house Home Furnishings LLC Page 2 OF 11

D Fourth Panel 1
E Side Frame 2
F Front Leg 2
G Hind Leg 2
H Iron U Connect 4
I X Shape 1
Label Picture Description QTY
①Screw(M7X48MM) 17
②Bolt(M6X10MM) 9
Noble house Home Furnishings LLC Page 3 OF 11

③
Sleeve
Nut(M8X15MM)
9
④Bolt(M4X30MM) 5
⑤Bolt Cap(M4) 5
⑥Allen Key(M6) 2
⑦Allen Key(M4) 1
⑧Open Spanner 1
⑨
Screwdriver
(not provided)
1
⑩
Hammer
(not provided)
1
⑪
Power Drill
(not provided)
1
⑫L-shape Metal Sheet 2
⑬
Screws (35mm Self
Tapping)
2
⑭
Screws (15mm Self
Tapping)
2
⑮Plastic Dowel 2
Cabinet Restraint Device Hardware
Noble house Home Furnishings LLC Page 4 OF 11

Before
Beginning
Assembly:
Overview
First
Panel(A)
X Shape(I)
Fourth Panel (D)
Second Panel (B)
Third Panel (C)
Side Frame (E)
FRONT FACING
X 1
X1
X 1
X 9
X17
X 5
X 5
X2
X 2
X 9
A
B
C
D
E
E
F
F
G
G
H
H
H
H
I
Front Leg(F)
Hind Leg(G)
Iron U Connect(H)
X 1
X 1
Noble house Home Furnishings LLC Page 5 OF 11

Step 1
Unpack and place all parts on a clean, non-marring surface.
Attach one end of the Front Legs (F) to the bottom end of Side Frame(E) by
hand.Use Iron U Connect(H) them with Bolt(②) and Sleeve Nut (③) by Allen
Key(⑥)
Do not fully tighten the Bolts at this time.
This bookshelf has several parts and may require up to 30 minutes to
assemble.
To give you an overview of the bookshelf parts, the above picture is to help you
put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the parts
and steps before assembly.
H
Noble house Home Furnishings LLC Page 6 OF 11

Step 2
Step 3
Attach one end of the Hind Leg (G) to the bottom end of Side Frame(E) by
hand.
Use Iron U Connect(H) them with Bolt(②) and Sleeve Nut (③) by Allen Key(⑨).
Repeat Step1 and Step2 to assemble another Front Leg(F) and Hind Leg(G) to
bottom of another Side Frame(E) .
Do not fully tighten the Bolts at this time.
Noble house Home Furnishings LLC Page 7 OF 11
H
E

Step 4
Step 5
Connect the First Panel(A)，Second Panel(B),Third Panel(C) and Fourth
Panel(D) to another Side Frame(E),Front Leg(F) and Hind Leg(G) with
Screw(①) by Allen Key(⑥) .
Do not fully tighten the Screws at this time.
Connect the First Panel(A)，Second Panel(B)，Third Panel(C) and Fourth
Panel(D) to one Side Frame(E),Front Leg(F) and Hind Leg(G) with Screw(①) by
Allen Key(⑥) .
Do not fully tighten the Screws at this time.
Noble house Home Furnishings LLC Page 8 OF 11

Step 6
！WARNING
Serious or fatal crushing injuries can occur from tipping furniture.
To help prevent tip-over: ALWAYS secure this furniture to the wall using Bookshelf Restraint
Device.
See product instructions for more ways to help prevent furniture tip-over.
EXERT pressure, floorwards, onto the Bookshelf.
This pressure will help the Legs and Bookshef Top reach alignment at all joints.
Check for wobbles.
In a sequential manner, gradually tighten all Screws and Bolts until evenly
secured.
Inspect the Bookshelf and make sure all parts are adequately connected.
Please stand the bookshelf with the help of another adult.
Fasten X shape(I) with Bolt(④) and Bolt Cap(⑤) by Allen Key(⑦) and Open
Spanner(⑧).
Do not fully tighten the Bolts at this time.
Noble house Home Furnishings LLC Page 9 OF 11

Step 7
Step 7
Usage For Bookshelf Restraint Device:
Your Bookshelf is ready for use.
This Bookshelf can only be used on a flat, level surface.
7.1) Use Power Drill(⑪) Drill two mounting positions on wall at same height,
insert Plastic Dowel(⑮) into the mounting position with a Hammer(⑩)(Not
priovided)
7.2)Attach L-shape Metal Sheet(⑫) to plastic Dowel(⑮)using Screws(⑬)
withScrewdriver(⑨).Note: The Metal sheet need to be secured to solid, load
bearing surface. Please use aStud Finder(not supplied) if needed to locate the
Wall Frame.
7.3)Attach L-shape Metal Sheet(⑫) to First Panel(A)using Screws(⑭) with
Screwdriver(⑨).
A
Noble house Home Furnishings LLC Page 10 OF 11

●Stains may be removed with mild soap solution and
damp cloth.
●Children should not climb or jump on the furniture.
●Dust and pick-up spills using a clean, non-colored,
lint-free cloth.
●Do not clean furniture with harsh cleansers or polish.
●Do not place furniture under direct sunlight.
●Do not place furniture near heating or cooling vents.
●Do not write on furniture without a padded barrier to
protect the surface.
●Do not place furniture outside . For indoor use only.
●Not for commercial use. For residential use only.
Care & Maintenance
●Furniture may scratch floors. We recommend using
furniture pads to protect your floors.
●Do not put hot items directly on furniture surface.
Noble house Home Furnishings LLC Page 11 OF 11