Noble House Home Furnishings Arm Chair User manual

Label Picture Description QTY
A Chair Seat 1
BFront Leg 2
Assembly Instructions
Caution: You must read this before you proceed
Arm Chair
Parts List
Noble house Home Furnishings LLC Page 1 OF 5

C Back Leg 2
Label Picture Description QTY
①Bolt (M6*19mm) 13
②Spring Washer 13
③Washer 13
④Allen Key 1
Hardware
Assembly Preparation
Before
Beginning
Assembly:
Noble house Home Furnishings LLC Page 2 OF 5

Step 1
Assembly Steps
Overview
This Arm Chair has multiple parts and may require up to 30 minutes to assemble.
To give you an overview of the Arm Chair, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
Place the Chair Seat (A), Front Legs (B) and Back Legs (C) onto a clean, non-
marring surface.
A
FRONT FACING
Back Leg(C)
BC
Chair Seat (A)
Front Leg(B)
Noble house Home Furnishings LLC Page 3 OF 5

Step 2
Step 3
Turn over the Chair Seat(A), attach the Front Legs (B) and the Back Legs (C) to the
bottom of the Chair Seat(A) using Bolts(①), Spring Washers(②) and Washers(③)
with the Allen Key(④) as shown above.
Place the Arm Chair on a Level Surface , adjust the Pre-installed Levelers at the
bottom of the Front Legs (B) and the Back Legs (C) until the Arm Chair is level with
the ground.
Noble house Home Furnishings LLC Page 4 OF 5

Step 4
Your Arm Chair is ready for use.
This Arm Chair can only be used on a flat, level surface.
Noble house Home Furnishings LLC Page 5 OF 5