Noble House Home Furnishings ROCKING CHAIR User manual

Assembly Instructions
ROCKING CHAIR
Caution: You must read this Assembly Instructions before you proceed
Noble House Home Furnishings LLC
Page 1 OF 7
CAUTION : This Rocking chair is NOT a TOY.
Keep your child / children at bay during the assembly process.
Whenever moving or lifting the Rocking chair and to prevent damage to the
Rocking chair, two adults are needed to execute this action.
Please look at front legs of the Foldable Seat
and Backrest for hardware packs.

Noble House Home Furnishings LLC
Page 2 OF 7
Label Picture Description QTY
B
Left Armrest
1
Parts List
Right Armrest
1A
C 1
Foldable Seat and
Backrest
Label Picture Description QTY
1
2
5
Bolt (M x )6 35 mm
Allen Wrench
Screw ( M x )4 30mm
Screwdriver
(Not provided)
6
3
4
7
Sleeves Washer
(M x )6 3mm
Screw
mm ( M7x70 )
3
3
9
1
Hardware
1
Rocker
D 2
E Support Corners 2
5
Screw
mm ( M6x60 ) 3

Before Beginning Assembly:
Noble House Home Furnishings LLC
Page 3 OF 7
Left (C) Armrest
Right (B) Armrest
Foldable Seat And
Backrest (A)
FRONT FACING
This Rocking Chair has multiple parts and may require up to 30 minutes
to assemble.
To give you an overview of the Rocking Chair parts, the above picture is
to help you put the various parts into perspective. Please read through
the instructions below to familiarise yourself with the parts and steps
before assembly.
OVERVIEW
Before Beginning Assembly:
Rocker (D)
Support
Corners (E)
x 3
x 5
x 3x 3
x 9
x 1
x 1

Step 2
Unpack and place all parts on a clean, non-marring surface.
Noble House Home Furnishings LLC
Page 4 OF 7
Step 1
E
A
2.1) Open Backrest and Leg as indicated by the arrow.
2.2) Insert Wooden Dowel on (E) into Support Corner hole on the leg
of Foldable Seat and Backrest (A) then secure using Screws ( ) and
Screwdriver ( ) as above picture.
Repeat the same process with the other Support Corner (E).
Do not fully tighten the Screw and Bolt.
1
7
7

Step 3
Noble House Home Furnishings LLC
Page 5 OF 7
26
3
46
Repeat the same process with the Right Armrest(B).
A
C
3.1) Insert Left Armrest ( C) onto tenon on Backrest Support and
attach using Screw ( ) with Allen Wrench ( ).
3.2) Attach Left Armrest ( C) to Leg of Foldable Seat and Backrest
(A) using Bolt ( ) and
Sleeves Washer ( ) with Allen Wrench ( 6 )
4
2
6
3
Do not fully tighten the Screw and Bolt.

Noble House Home Furnishings LLC
Page 6 OF 7
Step 4
6
5
With help from your adult assistant, lay the Chair down on its side.
Attach Rocker(D) to Left Leg of Foldable Seat and Backrest(A) using Screws( ) with
Allen Wrench( ).
Do not fully tighten the Screws.
Repeat the same process with the Right Leg of Foldable Seat and Backrest(A) and
Rocker(D).
A
D
Place the Rocking Chair right side up on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and gracefully, sit into to the Rocking Chair.
This will help to align all the parts at all joint areas.
Then get off the Rocking Chair and proceed to tighten the Bolts and Screws in a
sequential manner.
Your Rocking Chair is ready for use.
This Rocking Chair can only be used on a flat, level surface.
Step 5
6
5

Noble House Home Furnishings LLC
Page 7 OF 7
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
To obtain the longest lifespan of your outdoor products, minimizing exposure to direct
sunlight is recommended.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Care & Maintenance