Noble House Home Furnishings Adirondack User manual

Assembly Instructions
ADIRONDACK
Caution: You must read this before you proceed
Noble House Home Furnishings LLC Page 1 OF 9
Please look in the Seat Panel for hardware packs
Caution: This Adirondack is NOT a TOY.
Keep your child / children at bay during the assembly process.
Whenever moving or lifting the Adirondack and to prevent damage to the
Adirondack, two adults are needed to execute this action.

Noble House Home Furnishings LLC Page 2 OF 9
Label Picture Description QTY
Parts List
1
A
Backrest
Pre-fixed Front Leg
Seat Panel
B
C
D
F
1
1
1
1
G
KD Slat
Folding Support Bar
Right Armrest
E 1
2
Left Armrest

Noble House Home Furnishings LLC Page 3 OF 9
Label Picture Description QTY
Hardware
7
Sleeve Nut ( M8x15 ) 7
Long Screw ( M7x70 ) 3
Short Screw ( M7x40 ) 3
1
2
3
4
Screw (M4x30mm)
(Use with Screwdriver)
Plastic Washer (M8x3mm)
Allen Key
9
7
2
5
6
7
8 Screwdriver Not provided
Before Beginning Assembly:
Bolt ( M8x35 )

This Adirondack has multiple parts and may require up to 30 minutes to
assemble. To give you an overview of the Adirondack parts, the above
picture is to help you put the various parts into perspective. Please read
through the instructions below to familiarise yourself with the parts and
steps before assembly.
Noble House Home Furnishings LLC Page 4 OF 9
Unpack and place all parts on a clean, non-marring surface.
Step 1
Seat Panel (A)
Right Armrest (D)
Left
Armrest (E)
Backrest (B)
Pre-fixed Front Leg (C)
OVERVIEW
FRONT FACING
KD Slat (F)
Folding Support Bar (G)
Assemble Steps

Noble House Home Furnishings LLC Page 5 OF 9
Step 2
C
A
1
6
7
Step 3
2
8
5
F A
Place the Seat Panel (A) onto a clean, non-marring surface.
Position KD Slat(F) onto the Seat Panel(A) and attach using 4 Screw ( 5)
and Screwdriver ( 8 )
Do not fully tighten Screws
Turn upside down Seat Panel(A) as shown in the picture.
Attach Pre-fixed Front Leg© to Seat Panel (A) using Bolt (①), Plastic
Washer ( ⑥), and Sleeve Nuts (⑤) with Allen Key (⑦).
Do not fully tighten Bolts
Note: The Plastic Washer should be placed between the Seat Panel
and Pre-fixed Front Leg.

Step 4
Noble House Home Furnishings LLC Page 6 OF 9
Step 5
7
4
A
B
G
C
A
G
7
2
61
Place the Frame in Step 3 in the position as picture above
Attach Folding Support Bar(G) to Seat Panel(A) using Bolt ( ① ), Plastic
Washer (⑥), and Sleeve Nut (②) with Allen Keys (⑦).
Do not fully tighten Bolts.
Note:Plastic Washer should be placed between Seat Panel and
Folding Support Bar.
Position Backrest (B) with mortise into housing of Folding Support Bar (G)
Secure Folding Support Bar(G) to Backrest (B) using Screw ( ④ ) and
Allen key ( ⑦ ) as shown above.
Do not fully tighten Screws

Noble House Home Furnishings LLC Page 7 OF 9
Step 7
A
B
D
C
1
2
7
3
6
Step 7.1
Step 7.2
C
A
B
8
5
Step 6
7
Fold out the Left and Right Support Corners of Pre-fixed Front Leg (C ) as
indicated by the arrow, Then secure using Screws (⑤) with Screwdriver
(⑧) as shown above.
Do not fully tighten the Screws.
7.1) Attach the Right Armrest (D) to Pre-fixed Front Leg (C) by using Bolt (
①), Plastic Washer(⑥), and Sleeve Nut (②) with Allen Keys (⑦).
7.2) Secure Right Armrest (D) to Backrest(B) using Long Screw (③) with
Allen Key (⑦).
Do not fully tighten Bolts and Screws.
Note: Plastic Washer should be placed between Left Armrest and Pre-
fixed Front Leg.
Repeat the same process with the Left Armrest (E).
In a sequential manner, tighten all Bolts and Screws at all joints until
fully locked into position.

Noble House Home Furnishings LLC Page 8 OF 9
Step 8
To Open
To Fold
Step 9
Push the Wooden Pin through the Legs as pictured to Lock the Chair into position.
Gently and gracefully, sit onto to the Adirondack. This will help to align all the parts
at all joint areas.
In a sequential manner, tighten all Bolts and Screws at all joints until fully locked
into position.
Your Adirondack is ready for use.
This Adirondack can only be used on a flat, level surface.
This Adirondack can be folded shut.
To fold: pull the Wooden Pins out of the Legs, then lift up the Backrest
and fold the Seat Panel as shown above, until the Adirondack folds shut.
To open: pull the Backrest and Seat up as indicated by the arrows, then
insert the Wooden Pins through the Legs.
Note: This Adirondack is heavy, always have a second adult to
assist whenever moving or lifting it.

Noble House Home Furnishings LLC Page 9 OF 9
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Care & Maintenance