Noble House Home Furnishings Barstool User manual

Noble house Home Furnishings LLC Page 1 OF 8
Label Picture Description QTY
A Chair Seat 1
BLeft Leg (with
Adjustable Leveller) 1
Assembly Instructions
Caution: You must read this before you proceed
BARSTOOL
Parts List

Noble house Home Furnishings LLC Page 2 OF 8
CRight Leg (with
Adjustable Leveller) 1
D Front Rail 1
E Back Rail 1
FFront Connecting
Rod 1
Label Picture Description QTY
①Bolt (M6*19mm) 21
②Spring Washer 21
③Washer 21
④Allen Key 1
Hardware
Assembly Preparation
Before
Beginning
Assembly:

Noble house Home Furnishings LLC Page 3 OF 8
Step 1
Overview
This Barstool has multiple parts and may require up to 30 minutes to assemble. To
give you an overview of the Barstool,the above picture is to help you put the
various parts into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
Place the Chair Seat (A), Left Leg (B), Right Leg (C), Front Rail (D), Back Rail (E)
and Front Connecting Rod (F) onto a clean, non-marring surface.
Assembly Steps
A
FRONT FACING
Left Leg (B)
C
Front Connecting Rod (F)
Chair Seat (A)
D
B
Right Leg (C)
EF
Front Rail (D)
Back Rail (E)

Noble house Home Furnishings LLC Page 4 OF 8
Step 2
Step 3

Attach Front Rail(D) and Back Rail(E) to Left Leg(B) using Bolts(①), Spring
Washer(②) and Washer(③) with Allen Key(④) as shown above.
Please note: This Step do not fully tighten the Bolts.
3.1
3.2

Noble house Home Furnishings LLC Page 5 OF 8
Step 4
Step 5
3.1) Insert Front Connecting Rod(F) into Left Leg(B) as shown above.
3.2) Attach Front Connecting Rod(F) to Left Leg(B) using Bolts(①), Spring
Washer(②) and Washer(③) with Allen Key(④) as shown above.
Please note: This Step do not fully tighten the Bolts.
Insert Right Leg(C) into Front Connecting Rod(F) using Bolts(①), Spring
Washer(②)and Washer(③) with Allen Key(④) as shown above.
Please note: This Step do not fully tighten the Bolts.
Align Right Leg(C) to Front Rail(D), Back Rail(E) and Front Connecting Rod(F)
using Bolts(①), Spring Washer(②) and Washer(③) with Allen Key(④) as shown
above.
Please note: This Step do not fully tighten the Bolts.

Noble house Home Furnishings LLC Page 6 OF 8
Step 6
Step 7
Align Left Leg(B) and Right Leg(C) to the bottom of Chair Seat(A) and attach using
Bolts(①), Spring Washer(②) and Washer(③) with Allen Key(④) as shown above.
Tighten all Bolts at all joints fully in a sequential manner.
Adjust the Pre-installed Levelers at the bottom of Left Leg (B) and Right Leg (C)
until the Barstool is level with the ground.

Noble house Home Furnishings LLC Page 7 OF 8
Step 8
Your Barstool is ready for use.
This Barstool can only be used on a flat, level surface.

Noble house Home Furnishings LLC Page 8 OF 8