Noble House Home Furnishings KITCHEN CART User manual

Caution : You must read this before you proceed
KITCHEN CART
Noble house Home Furnishings LLC Page 1 OF 15

Label Picture Description QTY
ALeft Side Panel 1
BRight Side Panel 1
CTop Panel 1
DPartition 1
EUpper Shelf 1
FShelf 1
GUpper Cross Bar 1
HCross Bar 1
ILeft Back Panel 1
JRight Back Panel 1
Noble house Home Furnishings LLC Page 2 OF 15

KBottom Panel 1
LDoor Panel 1
MDrawer Back Panel 2
N
Drawer Left Side
Panel
2
O
Drawer Right Side
Panel
2
PDrawer Bottom Panel 2
QDrawer Front Panel 2
Label Picture Description QTY
①Cam Bolt 30
②Cam Lock 30
③Screw
(M4x35mm) 7
④Dowel 11
⑤Screw
(M3x12mm) 35
⑥Magnet 1
Noble house Home Furnishings LLC Page 3 OF 15

⑦Screw
(M4x14mm) 17
⑧Wheel
(with brake) 2
⑨Wheel 2
⑩Handle 4
⑪Screw
(M3x14mm) 11
⑫Door Pin 2
⑬Bracket 1
⑭Screw
(M4x30mm) 9
⑮Cabinet Slider 4
⑯Drawer Slider 4
⑰Buckle 8
⑱
Screwdriver
(Not provided)
1
Noble house Home Furnishings LLC Page 4 OF 15

Before Beginning Assembly:
Overview
FRONT FACING
Top Panel(C)
Door Panel(L)
Left Side
Panel(A)
Right Side Panel(B)
Drawer Front
Panel(Q)
Noble house Home Furnishings LLC Page 5 OF 15

This Kitchen Cart has multiple parts and may require up to 60 minutes to
assemble.
To give you an overview of the Kitchen Cart parts, the above picture is to
help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the
parts and steps before assembly.
Step 1
Unpack and place all parts on a clean, non-marring surface.
Step 2
Separate the two sliders as shown.
Step 3
3.1
3.2
Noble house Home Furnishings LLC Page 6 OF 15

3.1)Attach Cabinet Slider(⑮) to Partition (D) using Screw(⑤) with
Screwdriver(⑱).
3.2)Attach Cabinet Slider(⑮) to Right Side Panel (B) using Screw(⑤)
with Screwdriver(⑱).
Step 4
Insert Cam Bolt(①) into the mounting positions on the Right Side
Panel(B) and Partition(D) using Screwdriver(⑱) as shown.
Step 5
Insert Cam Bolt(①) into the mounting positions on the Left Side Panel(A)
and Partition(D) using Screwdriver(⑱) as shown.
Noble house Home Furnishings LLC Page 7 OF 15

Step 6
1).Attach Left Side Panel(A) and Partition (D) to Upper Shelf (E) and
Shelf(F), inserting Cam Locks (②) into Upper Shelf (E) and Shelf(F)
using Screwdriver(⑱) as shown.
2).Remark:make sure both metal rails on Partition (D) as shown.
Step 7
1).Attach Magnets (⑥) to Cross Bar (H) using Screws(⑪) with
Screwdriver(⑱).
2).Attach Bracket(⑬) to Door Panel (L) using Screws (⑤) with
Screwdriver(⑱).
3).Attach Handle (⑩) to Door panel (L) using Screws (⑤) with
Screwdriver(⑱) as shown.
Noble house Home Furnishings LLC Page 8 OF 15

Step 8
1).Insert Dowels (④) into the mounting positions on Upper Cross Bar(G),
attach Partition (D) to Dowels (④) on Cross Bar (G), then attach Partition
(D) to Cross Bar (H),inserting Cam Locks (②) into Cross Bar (H) using
Screwdriver(⑱) as shown.
2).attach Right Side Panel (B) to Dowels (④) on Cross Bar (G), then
attach Right Side Panel (B) to Cross Bar (H),inserting Cam Locks (②)
into Cross Bar (H) using Screwdriver(⑱) as shown.
3).Insert Dowels (④) into the mounting positions on the Left Side Panel
(A) Right Side Panel (B) and partition panel (D).
Step 9
Noble house Home Furnishings LLC Page 9 OF 15

1.Insert Door Pins (⑫) into the mounting positions on Door Panel (L) as
shown.
2.Attach Bottom Panel (K) to Dowels (④) on the Left Side Panel (A),
Right Side Panel (B) and partition panel (D),also attach Bottom Panel (K)
to Door Pins (⑫) on Door Panel (L),then using screws(③) with
Screwdriver(⑱) as shown.
Step 10
Attach Wheel(with brake) (⑧) and Wheel (⑨) to Bottom Panel (K)
with Screws (⑦) using Screwdriver(⑱).
Step 11
Noble house Home Furnishings LLC Page 10 OF 15

Insert the Left Back Panel (I) and Right Back Panel(J) by sliding in the
panel into the grooving as shown.
Step 12
Insert the Cam Bolt(①) into Top Panel(C) with Screwdriver(⑱).
Step 13
Insert Cam Lock(②) into the Left Side Panel(A),Partition(D) and Right
Side Panel(B) using Screwdriver(⑱) as shown.
Noble house Home Furnishings LLC Page 11 OF 15

15.1)Attach Cam Bolt(①) to the mounting positions on Drawer Front
Panel(Q) using Screwdriver(⑱) as shown.
15.2)Attach Drawer Left Side Panel(N) and Drawer Right Side Panel(O)
to the Cam Bolt(①) on Drawer Front Panel(Q), insert Cam Lock(②) into
the Drawer Left Side Panel(N) and Drawer Right Side Panel(O) using
Screwdriver(⑱) as shown. Do not fully tighten Cam Locks(②).
15.3)Insert Drawer Bottom Panel(P) by sliding in the panel into the
grooving as shown. then tighten the Cam Locks(②) with Screwdriver(⑱)
.
Step 14
Attach the Buckle(⑰) to the Left Back Panel(I) and Right Back Panel(J)
using Screw(⑪) with Screwdriver(⑱).
Make sure the whole product is stable.
Step 15
15.2
15.3
15.1
Noble house Home Furnishings LLC Page 12 OF 15

Step 16
Attach Drawer Back Panel(M) to the Drawer Left Side Panel(N) and
Drawer Right Side Panel(O) using Screw(⑭) with Screwdriver(⑱).
Step 17
17.1)Attach Drawer Slider(⑯) to Drawer Left Side Panel(N) using
Screw(⑤) with Screwdriver(⑱).
Repeat this step for the Drawer Right Side Panel(O).
17.2)Attach Handle(⑩) to Drawer Front Panel(Q) using Screw(⑤) with
Screwdriver(⑱).
17.1
17.2
Noble house Home Furnishings LLC Page 13 OF 15

Step 18
Noble house Home Furnishings LLC Page 14 OF 15

Care & Maintenance
●Do not put hot items directly on furniture surface.
●Do not clean furniture with harsh cleansers or polish.
●Do not place furniture under direct sunlight.
●Children should not climb or jump on the furniture.
●Dust and pick-up spills using a clean, non-colored,
lint-free cloth.
●Do not place furniture near heating or cooling vents.
●Do not write on furniture without a padded barrier to
protect the surface.
●Do not place furniture outside . For indoor use only.
●Not for commercial use. For residential use only.
●Stains may be removed with mild soap solution and
damp cloth.
Noble house Home Furnishings LLC Page 15 OF 15