Noble House Home Furnishings LOVESEAT User manual

Caution : You must read this before you proceed
LOVESEAT
Noble House Home Furnishings LLC Page 1 OF 7

Label Picture Description QTY
A Seat 1
B Back Leg 2
C Front Leg 2
Label Picture Description QTY
①Bolt (M8*60MM) 5
②Bolt (M8*70MM) 5
③Spring Washer 10
④Washer 10
⑤Allen Key 1
Noble House Home Furnishings LLC Page 2 OF 7

Overview
Before
Beginning
Assembly
:
Front Leg(C)
Seat(A)
Back Leg(B)
Back Leg(B)
FRONT FACING
Noble House Home Furnishings LLC Page 3 OF 7

Step 1
Step 2
This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Loveseat parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions below to familiarise yourself with the parts and
steps before assembly.
Place the Seat(A) on a clean, non-marring surface with the bottom facing you, as shown in picture
above.
Carefully unzip the Dust Cover at the bottom, and remove the Legs and Hardware.
A
Seat(A)
Seat (A)
Back Leg (B)
Back Leg (B)
Front Leg (C)
Front Leg (C)
①
③
④
⑤
Back Legs (B) Front Legs (C)
③
②
Noble House Home Furnishings LLC Page 4 OF 7

Stand the Loveseat up.
Place the Loveseat on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and carefully, sit on the Loveseat.
This will help to align all parts at all joints.
Then get off the Loveseat, and carefully place the Loveseat facedown.
Then proceed to tighten all Bolts at all joints in a sequential manner.
If there are still wobbles, loosen the Bolts and execute the same process.
Step 3
Insert one Back Leg(B) into the mounting position of Seat(A) and attach using Bolts(①), Spring
Washers(③) and Washers(④) with Allen Key(⑤).
Do not fully tighten the Bolts.
Repeat the same process to attach the remaining three Legs.
Attention: The Front Legs(C) using the longer Bolts(②).
Test for Stability
Front Leg(C)
Seat(A)
Back Leg(B)
Back Leg(B)
Noble House Home Furnishings LLC Page 5 OF 7

Step 4
Step 5
Your Loveseat Chair is ready for use.
This Loveseat Chair can only be used on a flat, level surface.
Finally, seal the Dust Cover back on to the underside of the Seat(A).
Front Leg (C)
Seat (A)
Back Leg (B)Back Leg (B)
Front Leg (C)
Noble House Home Furnishings LLC Page 6 OF 7

●Dust and pick-up spills using a clean, non-colored,
lint-free cloth.
●Furniture may scratch floors. We recommend using
furniture pads to protect your floors.
Care & Maintenance
●Do not write on furniture without a padded barrier to
protect the surface.
●Do not place furniture outside . For indoor use only.
●Not for commercial use. For residential use only.
●Stains may be removed with mild soap solution and
damp cloth.
●Children should not climb or jump on the furniture.
●Do not put hot items directly on furniture surface.
●Do not clean furniture with harsh cleansers or polish.
●Do not place furniture under direct sunlight.
●Do not place furniture near heating or cooling vents.
Noble House Home Furnishings LLC Page 7 OF 7